Glock Lube - Page 2

**H0TSH0T** · 08-15-2009, 09:07 PM

i use hoppes supper elite cleaners and oils, never had a negative issue as a result.

**Garufa** · 08-15-2009, 09:13 PM

If it slides grease it. Oil is not grease.

I put a little dollop of Tetra grease on the slides of my semi-auto pistolas.

They will extract and chamber a round faster than any other while not causing any wear.

**Jeff Lemons** · 08-15-2009, 09:16 PM

Just rub some dirt in it.

**SUNTZU** · 08-15-2009, 09:26 PM

Quote:

Originally Posted by Metalhead

Breakfree myself.

Quote:

Originally Posted by Westwindmike

5 drops of Breakfree.

Quote:

Originally Posted by BrasilNuts

Militec 1

Quote:

Originally Posted by 70below

I've just always cleaned with Hoppes, and oiled with whatever is on hand. My G22 with over 10K rounds through it hasn't complained.

Recently I started using Militec-1 though. Use their grease on the rails, and wipe the rest down lightly with the oil. Seems like some awesome stuff.

Email them for your free sample...it last quite a while.

Quote:

Originally Posted by H0TSH0T

i use hoppes supper elite cleaners and oils, never had a negative issue as a result.

Quote:

Originally Posted by Garufa

If it slides grease it. Oil is not grease.

I put a little dollop of Tetra grease on the slides of my semi-auto pistolas.

They will extract and chamber a round faster than any other while not causing any wear.

Thanks guys.

Everybody else...

**1shot** · 08-16-2009, 08:01 AM

Lube plate grease that comes in those little WWII style yellow top tubs that fit in the stock of an M1 Garand. Best grease I have ever seen. Brownells has it in a larger can. I put a little on the 5 points that you lube on a Glock.

**m&pc9** · 08-16-2009, 08:42 AM

I use shooters grease on the slide rails. Because I will clean the gun and may not shoot for a month or two. And I think the oil runs off after a little while.

**Mark@Sea** · 08-16-2009, 06:02 PM

I use Berryhills' ultimate gun lube nowadays on my 1911's. Ultimate Gun Lube - $4.99 : Berryhill Custom LLC, Quality Gun Parts

Really can't advise you on what would be best for a gluck. Have you tried Testors?

**SUNTZU** · 08-16-2009, 07:22 PM

Quote:

Originally Posted by Mark@Sea

I use Berryhills' ultimate gun lube nowadays on my 1911's. Ultimate Gun Lube - $4.99 : Berryhill Custom LLC, Quality Gun Parts

Really can't advise you on what would be best for a gluck. Have you tried Testors?

I'll check into the Berryhill's and the grease from Brownell's. Thanks.

**titan14** · 08-16-2009, 07:26 PM

Berryhill's is the best stuff ever made...

**crimsonaudio** · 08-16-2009, 07:28 PM

For my Glock? Whatever gun oil I have lying around. I've shot countless thousands through it (and it was purchased used) and have had zero issues.

08-15-2009, 09:07 PM	#11 (permalink)
H0TSH0T TGO Member Joined: Aug 2009 Where: CHATTANOOGA, TN Age: 35 Posts: 322	i use hoppes supper elite cleaners and oils, never had a negative issue as a result. __________________ if one shows mercy to the guilty, they would equally show credulity to the innocent.

08-15-2009, 09:16 PM	#13 (permalink)
Jeff Lemons TGO Member Joined: Jul 2009 Where: Nashville, TN Age: 26 Posts: 237	Just rub some dirt in it. __________________ We must all fear evil men. But there is another kind of evil which we must fear most, and that is the indifference of good men.

08-16-2009, 08:42 AM	#16 (permalink)
m&pc9 TGO Senior Member Joined: May 2008 Where: Seymour Age: 41 Posts: 1,365	I use shooters grease on the slide rails. Because I will clean the gun and may not shoot for a month or two. And I think the oil runs off after a little while. __________________ We reserve the right to arm bears. WE SUPPORT CRIME CONTROL, NOT GUN CONTROL!

08-16-2009, 06:02 PM	#17 (permalink)
Mark@Sea TGO Senior Member Joined: Jul 2007 Where: Kingsport, more or less Age: 46 Posts: 1,544	I use Berryhills' ultimate gun lube nowadays on my 1911's. Ultimate Gun Lube - $4.99 : Berryhill Custom LLC, Quality Gun Parts Really can't advise you on what would be best for a gluck. Have you tried Testors? __________________ Ralph sez: "Whats in YOUR wallet?" Last edited by Mark@Sea; 08-16-2009 at 06:06 PM..

08-16-2009, 07:26 PM	#19 (permalink)
titan14 TGO Senior Member Joined: Mar 2009 Where: Church Hill, TN Age: 37 Posts: 505	Berryhill's is the best stuff ever made... __________________

08-15-2009, 09:13 PM	#12 (permalink)
Garufa Driving the short bus Joined: Mar 2008 Where: Knoxville, TN Age: 42 Posts: 1,716	If it slides grease it. Oil is not grease. I put a little dollop of Tetra grease on the slides of my semi-auto pistolas. They will extract and chamber a round faster than any other while not causing any wear.

08-16-2009, 08:01 AM	#15 (permalink)
1shot TGO Member Joined: Jul 2009 Where: Elizabethton TN Posts: 75	Lube plate grease that comes in those little WWII style yellow top tubs that fit in the stock of an M1 Garand. Best grease I have ever seen. Brownells has it in a larger can. I put a little on the 5 points that you lube on a Glock.

08-16-2009, 07:28 PM	#20 (permalink)
crimsonaudio Tony Scalia Joined: Apr 2008 Where: Shelby County Posts: 1,844	For my Glock? Whatever gun oil I have lying around. I've shot countless thousands through it (and it was purchased used) and have had zero issues. __________________ I'm your huckleberry

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode