amt automag II jamomatic

[jonc]

Alright guys I'm new to this sight and wanted to see if anyone could help me out.I got a used amt automag II .22 wmr took it out and shot it today and it either jammed every shot or didn't eject the spent cartrige at all.Is there anywhere I can send it for repair or any suggestions.
Thanks

[gcrookston]

Before you send it off somewhere, I suggest you break it down and lube and try again. I recommend tetra gun grease or slick 50 grease on all the contact points and a drop or two of CLP Breakfree on everything else. I've owned a couple of these and have never had problems. Then, again, I might have been lucky.

Failing the advise I offer, check on this forum for those still working on these:

http://www.automags.org/

[TN.Frank]

I had two AMT 45 autos(didn't learn my lesson with the first one) and they were both junk. A former Marine Corp armour told me that they just didn't have quality stainless steel in em'. From that point on I'll never buy another AMT pistol.

[DWARREN123]

Must be lubed and the chamber must be very clean for them to work. Usually have to clean the chamber every 30 to 50 rounds. Also use the best ammo for good operation.

[jonc]

Thanks for the input guys,I will try cleaning and re-greasing if it doesn't work then it's off to the gunsmith.