Fal builders?

**rjmech** · 11-03-2009, 07:32 PM

I was wondering if there are any recommended FAL builders in the mid-Tennessee area. I have an Imbel kit and am cobbling together a receiver and the compliance parts as we speak, but I do not really have the time or tools to build one myself. Thanks in advance.

**tedbo** · 11-04-2009, 09:25 AM

FNFAL.com / The FAL Files

It is chock full of info and there are some very knowledgable people there.
Ignore DABTL- he isn't worth the headaches.

I had a guy in Chattanooga put mine together.
His name is Rich,but I think he joined his business with someone else as he has had some serious back problems.He is well known and good at what he does.

Tedbo

**SHbicycle** · 11-04-2009, 09:37 AM

I have put together 5 of them over the years and have instructed people on about 20 others.

**1gewehr** · 11-05-2009, 08:32 AM

It's not hard to do. The most important tools are a large, strong bench vise and a receiver wrench. A Dremel is also pretty useful, though!
Instructions are on the FALFiles as stated above.

**fizik** · 11-08-2009, 09:13 PM

Thanks for that FALfiles link! never knew of that site.

**tedbo** · 11-11-2009, 10:57 AM

Zing!! reel 'em in!

Hooked us another'n for an evil black rifle.

11-03-2009, 07:32 PM	#1 (permalink)
rjmech TGO Freshman Joined: Nov 2008 Where: Nashville,TN Age: 30 Posts: 46	Fal builders? I was wondering if there are any recommended FAL builders in the mid-Tennessee area. I have an Imbel kit and am cobbling together a receiver and the compliance parts as we speak, but I do not really have the time or tools to build one myself. Thanks in advance.

11-04-2009, 09:25 AM	#2 (permalink)
tedbo TGO Member Joined: Jun 2008 Where: Mid-Tn Age: 51 Posts: 244	FNFAL.com / The FAL Files It is chock full of info and there are some very knowledgable people there. Ignore DABTL- he isn't worth the headaches. I had a guy in Chattanooga put mine together. His name is Rich,but I think he joined his business with someone else as he has had some serious back problems.He is well known and good at what he does. Tedbo __________________ Trust,but verify.

11-04-2009, 09:37 AM	#3 (permalink)
SHbicycle MMM MMM MM Joined: Aug 2007 Where: Spring Hill Posts: 245	I have put together 5 of them over the years and have instructed people on about 20 others. __________________ MMM MMM MM

11-05-2009, 08:32 AM	#4 (permalink)
1gewehr TGO Freshman Joined: Nov 2009 Where: Mid TN Posts: 20	It's not hard to do. The most important tools are a large, strong bench vise and a receiver wrench. A Dremel is also pretty useful, though! Instructions are on the FALFiles as stated above. __________________ Nemo me impune lacessit

11-08-2009, 09:13 PM	#5 (permalink)
fizik TGO Senior Member Joined: Jun 2008 Where: Nashville, TN Age: 23 Posts: 501	Thanks for that FALfiles link! never knew of that site. __________________ "Man! A nine is fine, but a .45 stops all jive."

11-11-2009, 10:57 AM	#6 (permalink)
tedbo TGO Member Joined: Jun 2008 Where: Mid-Tn Age: 51 Posts: 244	Zing!! reel 'em in! Hooked us another'n for an evil black rifle. __________________ Trust,but verify.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Home Builders in E TN	Linoge	General Off-Topic	5	12-17-2008 08:50 PM
Saiga Builders check this out!	Smith	Gunsmithing & Troubleshooting	17	06-20-2008 07:00 AM