Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 01/19/2017 in all areas

  1. 5 points
  2. First blade is made from 3/16" thick 1095 carbon steel with a RC of 58-59. It also received a cryogenic treatment. OAL is 12 1/4" with a blade length of 6 1/4". It has Arizona Mesquite scales that I sculpted and has SS loveless bolts and dark green liners. It has thumb jimping on the spine and a two toned acid dipping finish etched into the blade. It comes with a black kydex sheath with belt loop. Second blade is made from 3/16" thick 1095 carbon steel wirh a RC of 58-59. It also received a cryogenic treatment. OAL is 10 1/2" with a blade length of 5 3/4". It has Padauk and Ar
    4 points
  3. remove criminal penalty would be more benefit than anything those yo-yos in nashville will probably do everything they seem to do now is just feel good legislature
    4 points
  4. Looking at the Colt website it was made in 1918. The brown spots on the front of the gun appear to be something like shellac and not rust.
    3 points
  5. One of my students just gave me some bullets. I said I dont reload .40, he says keep them anyway. Who wants them? Magtech .40 flat nose FMJ 180gr. Please, only face to face, I dont want to ship. I am in Murfreesboro and can meet at the airport. 100 bullet bag, it is opened but appears to be almost full-ffr1910
    3 points
  6. 2 points
  7. Back in October I once again got an 03FFL. Aside from a lack of funds, I really don't have anything in the must have bucket list column. Living dangerously, Iv been known to browse the GB C&R listings on occasion (sorta like having unprotected sex). Well, who can resist the dream world of a Luger holding at $500? I clicked on it. Now every one knows that Luger will close at something that wont be anywhere near the 5 bones it had 5 days out from the gavel. But I clicked on it anyway. Here is the specimen in question.... This particular Luger is a 1906 model tha
    2 points
  8. I shoot all over the Southeast, but I run the local ARA matches at Strategic Edge in Chapel Hill. I shoot at Chattanooga Rifle Club and quite a few other places within a 4 hour drive of Nashville. I have a couple of extra competition guns if you ever want to give it a try. All I ask is that you pay for the ammo as it isn't cheap.
    2 points
  9. I got a Thrunite Ti3 with an Amazon gift card I got for Christmas. Nice little light, noticeably smaller and brighter than the single AAA light I was carrying. Thanks for the recommendation.
    2 points
  10. One generally carries a weapon for the safety of themselves and family. Without training you are doing just the opposite plus endangering the public. Carrying a handgun is a huge responsibility that few take seriously enough to take real training. A carry class simply exposes one to applicable laws and is not firearms training. To carry and not train not only is risky to your health but your freedom. Mess up and possibly lose your freedom and spend your life in jail away from your family is not a good outcome.
    2 points
  11. Most of my experience selling on CL has been getting an email or text saying "will you take (insert half the asking price or less) as the first contact.
    2 points
  12. I am pretty well setup to weld now. I currently can MIG and should be ready to TIG before too much longer. So if you need anything welded please give me a shout. No project is too small. Thanks
    1 point
  13. This was built a couple years ago and I love it but I'm buying a house and need the cash more. I have put 120 rounds from it. It comes with 2 unopened boxes of 20 rounds. I have a list of the items in the rifle below with the most current retail values I could find just for reference. The can, and bi-pod are not included. Meet in or around Nashville. 1. Vortex Viper PST 6-24x50 FFP $950 http://www.vortexoptics.com/product/vortex-viper-pst-6-24x50-ffp-riflescope-with-ebr-1-moa-reticle/reticle EBR-1 Reticle MOA Turret/MOA Reticle 2. Larue SPR-S LT-158 $200
    1 point
  14. It's not in your head, I've got the CORE 9mm, M&P9c both with the same Apex trigger and sear setup, and the out of box full factory 2.0 will outshoot both of them.
    1 point
  15. I picked up an M&P2.0 for $440 from garbagun a few weeks ago and holy smokes do those changes make a huge difference. There are a few things I was surprised about on it (I'm sure there will be legit online reviews form reputable sources, but here's what I noticed from owning two different model gen 1's and this 2.0 - all in 9mm): when the pistol goes into battery, there is a solid thud. The gun is built properly. Glocks, springfields, M&P gen 1's, they all feel loose compared to the M&P2.0 I mean, it is a solid thud, both from the sound and feel. Factory grips are the
    1 point
  16. Uberti El Patron .357, when I find one. Henry Big Boy .357, only problem with the Henry is I want a color case hardened receiver and they don't make that. Go figure. It's all about the hunt.
    1 point
  17. Runco, I say make 2017 a banner year... get two! Or ten! :-D Nightrunner, I bought the 5 inch 9mm and I have to say it's great. I already have 5 other M&P pistols and while the 2.0 isn't a complete redesign, it is a marked improvement. My first four shots out of the gun went into the same hole, with the rest of the mag very close or touching. Maybe it's all in my head, but that extended internal frame seems to keep the gun even flatter under recoil than before, and I have a 5" Pro model. The 2.0 shoots better than the Pro, imho. Ooooh. M1A... nice, Obiwan! I'm getting
    1 point
  18. Just a note. Matches don't start again until March at CRC, so if I don't pm you around then, send me a pm to remind me.
    1 point
  19. I talked a buddy into getting his first 45 in honor of the 45th president. He ordered a Colt 1911 from Grab-a-Gun, and he will take possession tomorrow (1/20). Now I am little jealous, I am seriously thinking about adding another 45 as well. I may consider a Sig P320 in 45 ACP maybe in the desert color, maybe the full size or Nitron Compact or the Carry. I try to buy at minimum one gun per year, and this is a new year.
    1 point
  20. New year with new rules! We'll have 5 to 6 stages that will consist of 100 to 120 rounds. New and old shooters are always welcome. 12:30 start time so be there by 12:00 or earlier, hope the see you on the range. Walden Ridge Shooting Range 1862 16th Model Rd Manchester,Tn 37355 Members $10 Nonmember $15 This is an IDPA event so concealment is needed. New shooters (to the sport) do not apply on concealment. You'll need 3 magazines (2 will work), and some good holsters.
    1 point
  21. Nice set of Troy BUIS, not micros. Has the M4 front sight. Lightly used. The bottom of the rear sight has had some of the anodizing removed from the previous owner. It doesn't affect anything, but just letting you know. Will not split up the pair. $145 shipped. Would trade for 7.62x39 ammo or RS Regulate AK mounts.
    1 point
  22. Sig Sauer P226 in 9mm. Excellent condition. It comes with 2 magazines (15 rd, 18 rd) factory grips and a set of Hogue rubber grips. $675 or trade for AR Pistol (no Anderson's please) Near Murfreesboro/ Franklin. Thanks for looking
    1 point
  23. Well, I bought one for $70, so, if anyone needs to borrow one I have it!
    1 point
  24. We have spoken. He wants one with a little less experience...
    1 point
  25. 1 point
  26. Wow! Hell'va deal!! Makes me sorry to be broke.
    1 point
  27. Come shoot with us. Mike who runs the matches is a great guy. You may know him.
    1 point
  28. Come on now, it isn't quite that much... Even then, with no wind flags, it may not be a given. Wind is what separates the men from the boys in our game.
    1 point
  29. No, if his measurement in the first post is correct, the overall bullseye is ~1.625 inches. So it would simply be 1.625 MOA at 100 yards. It's actually a bit more than that since you only have to break the bullseye, not be completely in. The hard part is no sighters once you start so unless you have wind flags up, a slight wind can push you out of that quite easily.
    1 point
  30. Selling off one of my most loved, but least used rifles. 1950 vintage, waffletop, 24" barrel, super tight action. Very crisp 3½lb trigger. Pre-microgroove rifling. I fitted the Williams FP tang sight, the flip up barrel sight (not original) is still in place. I'll also include an original rear sight, but it'll require using a lower front. Sometime in the depths of history some utter fourletterword has drilled & tapped the receiver & barrel for scope mounts, hence the price. I'm asking $550 absolutely firm on this. Check around & you'll find identical condition
    1 point
  31. I have a gunsmith screwdriver set that has one of those in it. The only place I've ever seen them is the nut that the crossbolt screws into on a 98 Mauser stock. http://shop.opticsplanet.com/wheeler-89-piece-deluxe-gunsmithing-screwdriver-kit.html?_iv_code=RR-G5-562194&utm_source=google&utm_medium=cpc&utm_campaign=plusbox-beta&gclid=CJH03oG9ztECFdQ2gQodemALcw
    1 point
  32. I recommend everyone do this. Also a good source/reference for expert witnesses if needed. And hopefully, like your firearm, never needed.
    1 point
  33. I had something for sale on here a few years ago. A guy pm'ed me and ask if I would be interested in some pygmy goats. I said no. He then proceeded to ask me if I would be interested in a Jack. I told him hell no.
    1 point
  34. Not a trade offer per se, and I don't remember the exact pricing, but once I found a Henry AR-7 in I believe the TN Trader. Called them up, they said it was like new, I drove 20 minutes to go buy it. It was + or - $20 from the new price on Bud's if I recall correctly, but worth it to avoid taxes, transfer fee, hassle, etc on a $200 firearm. Showed up cash in hand and fully ready to make a purchase. What I assume were a husband and Wife showed up. Showed me the AR-7 and walked me through all of how it "worked". I liked it but noticed that the buttstock cap, the piece that keeps the whole t
    1 point
  35. It should not be a crime to have a handgun whether it is concealed or not. Liberty is being defeated by these so called people control laws. Permits imho are a blessing with a fee attached. I'm quite blessed already and will not be seeking any additional ones.
    1 point
  36. No matter what I put up to sell, I always get at least one offer that's $200 less, along with "So when are you heading to Nashville?"
    1 point
  37. Darn good looking rifle! It would look good over any fireplace mantle!
    1 point
  38. Finally took time to notify my congressmen. Used NRA ILA web site, very easy and sent letters. BTW, I also asked for the confirmation of Sessions while there too.
    1 point
  39. Been keeping that one in the back of my mind since it came out. - OS
    1 point
  40. Sig Equinox 380,box, 3 mags,Iwb holster and 20 or so rounds of ammo. It's in great shape. $475. Mount juliet area,I'm in Brentwood on Tuesdays.
    1 point
  41. We do not have gun registration in the United States unless you buy from a dealer. The guns are yours and what you do with them is no ones business. You don't need permission, a license or permit from anyone. Cherokee Slim
    1 point
  42. High-tech method using custom tool to see if it's cut for 45acp: Take a nickel and see if it fits between the rear of the cylinder and the recoil shield. If it fits, it uses 45acp with half or full moon clips.
    1 point
  43. Congratulations! It sure is fun, I have a blast searching for this gun or that one or collecting all the variants of one particular model. Here's my list: J&G AIM Southern Ohio Gun Empire Arms Allans Armory Collectible Firearms Classic Firearms
    1 point
  44. Uberti El Patron in 45 Colt. It's a good 'un...
    1 point
This leaderboard is set to Chicago/GMT-05:00
×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines