Leaderboard

Guys I’m considering opening up one of my lower range areas to TGO. This would be a slow walked, cautious, ground level operation as I am just one man and taking on the prep work of the site (mowing, trimming, general clearing and parking arrangements) will take me time if I do this. Absolutely I will start with a case by case, appointment only basis that works for my schedule and availability. This is my private property, so I will always be in attendance & a safety waiver with common sense regulation would have to be a thing. I understand however that many of my friends here live in the city and have no place to really shoot when they want/what they want. I am 8 miles from Knoxville, Clinton, and Oak Ridge. If anyone wants to help me test out this idea, contribute to site prep if necessary, flesh out logistics- just pm me. Maybe we can help bring our little community together more. One small shoot at a time. Last thing, this is my short-range area, but we can see perhaps how this works out. No promises, but hope springs eternal. In Liberty, Stormborn

I picked up my Model 81 in .35 Remington today from my FFL. I would have had it sooner, but I’m STILL waiting on a GB seller to ship my Marlin 1894 44mag. It’s been 3 weeks. But I digress. The Remington is in very good condition for an 86 year old rifle. Based on the serial number all over every part, it is from 1937. I believe it was sent back to Remington in October of 41 based on the E3K date code stamped on the barrel shroud. The barrel shroud has a nice brown patina. The receiver has much of its bluing remaining. It is not marked with a “B” or “C” but there is very nice hand checkering of the stock and forearm. It has a grip cap on the pistol grip which I was usually on the D grade or higher. I wonder if the rifle was sent back to Remington in 41 to get the upgrades to the wood. it has a period Marbles peep sight and folding rear sight. I took the receiver completely apart today to give it a really good cleaning. I need to get the proper tool to disassemble the barrel. It is a well-built rifle. I can’t wait to get it out to the farm to shoot. I cleaned up the furniture a bit with denatured alcohol. Like all my other rifles, I will come back with a hand rubbed linseed oil finish. Unfortunately, I could not find my small container of Winchester Stock Oil. I guess I need to buy more.

While not breast cancer, I am also a two time survivor of Hodgkin’s Lymphoma (including high dose Chemo and a stem cell transplant). It can be a long tough road, but with prayer faith and family, you can get through this.

I’ve made a few posts here and there on other threads so thought I’d post a picture of what I ended up with. I started with a Sig P-365XL Spectre (non-comp), the original one with the distressed finish. I bought some 15 round mags to fit and then some 17 rounders when they became available. I installed a Holosun EPS Carry with the adapter plate as they didn’t include the proper length screws. Got in my TacRig screws the other day, so just got through removing the adapter plate and reinstalling directly to the slide. Been lusting after a bigger grip module, so I picked up an Sig macro grip module from a member on here. I got some TacDev base pads to make my 15 round mags work with my macro setup, and a 17 round base pad that covers the whole end of the grip module. It looks and feels better than the stock Sig base pads that come on the mags. I ordered some base pads that convert my 12 round mags to work in the macro, and a ‘plus 2’ 17 round base pad that will convert a 17 round mag to a 19 round mag. Not sure what configuration I will actually EDC. I will have options of a 12 round in the gun (for maximum conceal ability) and either a 15/17/19 round reload, or I could do a 15/17/19 in the gun with 17/19 reload available. I like options, lol and I like lots of ammo ready to go. Aesthetically, the aluminum 17 round base pad I have and the plus 2 one I’ve got on order look very similar, both covering the whole of the grip. The plus 2 sticks out more. Here’s a picture of my new setup with the holosun eps carry and 17 round mag with the TacDev aluminum base pad installed.

Hopefully we all realize that this day is set aside to remember and honor the ultimate sacrifice that has been paid by so very many on behalf of our country. I just heard this song recently. The band is Sabaton. They are a Swedish heavy metal band, very talented, and about all they sing about is history, especially historical battles. When I heard it the other day while driving I just about had to pull over. Let us never forget the sacrifice of not only those who have gone before us, but those who have gone for us. https://music.youtube.com/watch?v=Li_j5Y8PjJs&feature=share

My daughter age 39 and a mother of four has recently been diagnosed with breast cancer. She's seen the docs (got a second opinion) and the oncologist and is being set up for treatment of her particular type of cancer. Without going into to much detail I am asking that for those of you that pray may include Sarah in your prayers. She' a good daughter, wife and mother and she can use all the help she can get. Thanks in advance to all of you that may take the time.

This is a nice JM Marlin model 336 R.C. made in 1967 so no cross bolt safety. It is chambered in .30-30. The wood is in very good shape and the bluing is still strong. The bore is shiny, and the rifling looks sharp. It has had a sling stud added to the stock and there is one on the fore end band. It is missing the front sight hood. It currently has a Williams Peep sight attached. I am asking $800 $750 without the peep sight. If you want the peep sight, $850. $800 $750. I have decided to keep the peep sight for my 44Mag. I can post photos without the peep sight if wanted. Located in Nashville, for sale to folks 21 and older who can legally own a firearm. TN license or HCP flash. More photos upon request.

SOLD

Gone.

Here are two sets of Smith&Wessons Revolver Grips. 1st- N Frame Square Butt Factory Grips $85 Shipped. 2nd- Hertts K Frame Square Butt Walnut Grips $95 Shipped. Will do a package deal for both when bought together, just PM me. PAYMENTS ACCEPED ARE USPS MONEY ORDER PERSONAL CHECK(must clear before shipping) I also have a PayPal account if you want to use that method please PM me for information on that, Friends and Family with no comments. Thanks for looking.

I just cooked a half a pound a bacon and had a bacon sandwich for dinner. Mmmmmm Good.

When my son was a toddler he liked the Rescue Heroes cartoon and action figures. The firefighter who was the chief of the Rescue Heroes was named Billy Blazes. Me being a firefighter and my son loving the Rescue Heroes, Billy Blazes became my nom de plume

https://www.gtdist.com/used-gun-glock-22-gen-4-40-pistol.html For anyone in the Chattanooga area, they’re on the Georgia line but have an office in chatt that they do transfers for free (90% sure on internet sleuthing, YMMV) 10% off coupon for new users. $300 out the door w/ tax and background check.

Prayers for Sarah, you and the whole family. My wife is a 19 year survivor of Stage 4 breast cancer and still going strong.

We can’t have “nice gun laws” because the populace is incapable of exercising said laws responsibly.

I have several new Microtech Knives available. I purchased these over the last few years and am thinning out my collection. Microtech Anax S/E 190C-7 CFI TI $400.00 Microtech Socom Bravo S/E 260-7-CFTI $300.00 Microtech Hera 702-12 $400.00 Microtech Stitch A S/E 169-10 $375.00 sold pending meet

This is a very nice Browning Buckmark Rifle. The barrel is threaded. 650.00

Memorial Day - We Pause & Remember - How many of these riflemen didn't make it home

Old timer here... I hosted a few TGO shoots in the Kingsport area a little while back - maybe 15 years ago.

NGL, surprised this hasn't moved...

Free bump for a seller who always prices stuff super fair. GLWS!

Got this in a trade and don't have room for it. Lightly used H&k VP9 grey frame. Comes with box, 1-17rnd & 3-15rnd mags. $SOLD Nashville area.

You tempt me! But I have to find the Smith's I need grips for first! LOL! Really. I have an old 6" 38 that was my Dad's. In a fit of stupidity...I took the original grips off to clean it up. Lost the grip screws. Put it all away and haven't seen it since. But in my defence...I am old and getting very strange.

Pm sent w a trade offer

One more time for the weekend

Selling some for a big purchase. These are both in great shape and running within COSC. US shipping included. NO TRADES Located in Northern Mid TN Omega Railmaster ref 22010402001001 black dial on bracelet, full kit. Purchased through Ebay from Watchbox May of 2022, still has a year of warranty left from Watchbox. Excellent condition. $SOLD Breitling Super Ocean 42, in the beautiful orange dial. Has the Breitling cut to fit rubber sized right at 7”. I also have another fkm rubber that is more at the 7.5” area. Clasp has some faint desk marks but the head is in great shape. Purchased last May so still has a year warranty. SOLD

I'm confused. Like most politicians, he talks in circles. He seems to be opposing the bill, but then at the end, did he not say he was sponsoring it? Exactly what is he saying? BTW: Rose is my senator. I've voted for him and e-mailed him several times on 2A issues. He has always seemed very pro-gun to me.

It says what I am and that's just what I am. 3rd Army kid, born where Patton died and in the same hospital.

SOLD! Grizzly G0863 Dust Separate Cyclone for Woodshop or Workshop This unit is virtually brand new. I hooked it up once to confirm that it would work, but then went a totall different direction with a homebrew setup. Go figure. This cyclone sits between your dust collector and your power tools (table saw, miter saw, router table, jointer, band saw, etc.) and collects the vast majority of sawdust or other debris so that it doesn't damage the dust collector's impeller or clog the dust collector's filter and bag. It works REALLY well. These are also used by knifemakers and Kydex holster makers to save their dust collectors from abuse. You can learn more about this thing here: Grizzly Growler Cyclone Separator at Grizzly.com Terms of Sale Retail price is $395 plus shipping. Will sell to a TGO member for $250. Price is firm. PayPal or Cash Local pickup near Franklin and Spring Hill. More Photos

Huntin101, If you want to lay hands on one of the Bergara 22LRs, let me know. I'm a bit south of you in Summertown. Mine does not have the factory trigger though. It's *very* light at about 4-5 ounces.

Acts 4:30 Almighty God, please stretch forth your hand to heal and to perform signs and wonders in the holy name of your obedient servant Jesus

Praying that Sarah may have a sense of peace in the midst of the storm, may her doctors be led to make the best decisions for her, her husband and children be blessed with hope, you have strength to stand beside her, and in all things, may God's presence and love carry you all.

You got my prayers sir, I just had my 56th Chemo Treatment this past Monday. So I know what your going through, tell her to stay positive she can kick it. If you need to talk sometime just PM me. God Bless and take care.

Finally got to see one of our hummingbirds today.

Sold

Been 10 months and I’m still waiting on a Form 4. Good thing they didn’t make millions of Americans felons and bury their staff for generations by unilaterally changing their rules out of nowhere.

Break in targets with a starting load of H4350 and 143 ELDx's.

Because the seller said so ..

Have had several big offroad black/blacked out Ford vans. It was told to me that that it was easier to say that I was the guy driving the black van than it was to remember my name.

Kano was a Bandog Mastiff ... a friend use to breed some serious dogs that were used in one of the hulk movies and on the old fear factor show with Joe Rogan. Curly from the fear factor show was also one of Joes dogs. I had a male and a female from litters sired by Kano and Curly. Kano is the dog on a chain towards the end of the video he was still a young dog when Joe filmed it. A multi generation (strategically) Mixed bred dog for the purpose of realistic protection against humans. https://youtu.be/vu9U4es91B4 Kano at the end of the video. https://youtu.be/HN6_7jSyxrE Curly older but still a serious dog. https://youtu.be/3jdULSNQHTc Fear Factor the second time they were on TV.

I think there are probably liberal, agnostic, gun owning, non military, pro-choice, non NRA folks here as well. Or Moderate, Christian, gun owning, pro-choice indifferent on the NRA folks. That is what makes this a great forum. we have members of differing opinion, but I feel we all understand the importance of the Second Amendment to the Constitution. For the most part we respect (some maybe tolerate) each other’s differing viewpoints.