Jump to content

Grand Torino

Authorized Vendor
  • Posts

    4,399
  • Joined

  • Last visited

  • Days Won

    61
  • Feedback

    100%

Everything posted by Grand Torino

  1. Surely the wisdom of our legislators managed to not include bridge building in that bill....just sayin'. n:
  2. 4.2 MM thick Bohler SS with a Rockwell hardness of 59-60. Each knife is 8 3/4" long with a blade of 4". Comes with leather covered kydex sheath shown. $145. each shipped. N690 steel is cobalt-enriched stainless steel manufactured by Bohler, an Austria steel company. This steel is high in carbon and chromium elements with the addition of cobalt for consistency. N690 steel alloy contains high amounts of chromium making it stainless steel. It also has fine grain composition that enables the blade steel to remain sharp for a long time even after exposure to prolonged tough applications. Bohler N690 steel’s ability to withstand stress is a favorite choice for knife makers. It is used to make outdoor knives including, tactical, camping, hunting, and bushcraft knives 1. Desert iron wood with G10 accents and liners. Brass pins and lanyard tube. 2.SOLD TO LeeTheToolGuy Bocote with spalted tamarind and G10 accents and liners. Mosaic pins with brass lanyard tube.
  3. No love for #2. Let's see if it can find a home for $110 shipped.
  4. Nearly 75 myself and while staying active every day has it's challenges I'll still pleased to be on the right side of the grass. Get well soon and be careful out there.
  5. Both at 1/8 " thick 1084 carbon steel with OAL of 9" and a blade of 4". They have jimping on the spine and come with sheath shown. The kydex is wrapped in leather for a different feel and look. They are $125 each shipped. 1. Sold to KahrMan African blackwood handle with Bocote and G10 accents and liners. G10 pins and brass lanyard tube. 2. Brazilian Ebony with Elk antler hand and brass pins.
  6. I had a mine back in 08. Ended up with a stent and a triple bypass. Sixteen years later I'm still kickin' Do the rehab, take the meds listen to the doctors.
  7. The sheaths have been wet molded to that specific knife. Care much be taken when installing/removing the knife as to not cut/damage the leather. I've removed and installed the knives at least 15 times so I know it can be done. The sheath and knife come as package for $155 each. Additionally, knives should never be stored in leather sheaths for extended periods as leather holds moisture and will rust carbon steel knives and may even discolor/stain SS knives. Let's face it SS means "stain less" and not "stain proof". 4.2 MM thick Bohler SS with a Rockwell hardness of 59-60. Each knife is 8 3/4" long with a blade of 4". N690 steel is cobalt-enriched stainless steel manufactured by Bohler, an Austria steel company. This steel is high in carbon and chromium elements with the addition of cobalt for consistency. N690 steel alloy contains high amounts of chromium making it stainless steel. It also has fine grain composition that enables the blade steel to remain sharp for a long time even after exposure to prolonged tough applications. Bohler N690 steel’s ability to withstand stress is a favorite choice for knife makers. It is used to make outdoor knives including, tactical, camping, hunting, and bushcraft knives. 1. Sold to LeftySlade Antiqued treatment on white oak handles with Padauk and G10 accents and liners. Custom mosaic pins and brass lanyard tube. 1. SOLD TO RED333 Red oak handles with spalted tamarind and g10 accents and liners. Custom mosaic pins and brass lanyard tube.
  8. Made from 1/8" thick 1084 carbon steel they are 7 1/2" long with a blade of 2 3/4". They have thumb jimping and come with sheaths shown and equipped with a UltiClip. This clip allows you to clip on you pants to pocket carry of IWB carry without a belt. You can also clip it to most belts. And by simply reversing the clip to the other side of the sheath you can carry on the left side if you wish. $95 each shipped. 1. Sold to bubbadavis Ivory toned G10 with G10 pins. 2. Sold to TNBuck2 OD Green Canvas Micarta with G10 pins.
  9. The sheaths have been wet molded to that specific knife and I have to tell you the knife won't fall out. They are danglers with ferro rod and care much be taken when installing/removing the knife as to not cut/damage the leather. I've removed and installed the knives at least 15 times so I know it can be done. The sheath, ferro rod and knife come as package for $175 each. Additionally, knves should never be stored in leather sheaths for extended periods as leather holds moisture and will rust carbon steel knives and may even discolor/stain SS knives. Let's face it SS means "stain less" and not "stain proof". 1. Sold to LeftySlade A bushcraft style knife with scandi grind made from 4116 SS 3MM thick. The handle is spalted tamarind with red G10 liners. Mosaic pins featuring an image of a Buck. OAL is 9 1/2" and blade is 4 3/4". 2. Sold to Patriotsson Made from 4.4 MM thick Sleipner Steel. Sleipner Steel is a tool steel made by Uddeholm. It's a new generation D2 steel with improved hardness, toughness and edge retention. The steel is used in knife making and tooling. It has desert ironwood handles with G10 accents and liners. There is jimping on the spine . The pins are mosaic and represent the 3 stars on the Tennessee flag.
  10. These are what I'd call medium sized Bowies. They come with combo kydex/leather sheath shown and are $125 each. 1. SOLD to Rob112o Made from 5/32 " thick 1084 carbon steel it's OAL is 11 1/4" with a blade of 5 3/4". The finger guard is SS and the handle is Walnut with G10 accents. 2. SOLD to pfair Made from 3/16" thick 1084 carbon steel it's OAL is 11 1/4" with a blade of 6". The finger guard is SS and the handle is Olivewood with ironwood and G10 accents. Thanks for lookin!!!

TRADING POST NOTICE

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions.

TGO makes no claims, guarantees or assurances regarding any such transactions.

THE FINE PRINT

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

TNGunOwners.com (TGO) is not a lobbying organization and has no affiliation with any lobbying organizations.  Beware of scammers using the Tennessee Gun Owners name, purporting to be Pro-2A lobbying organizations!

×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines
 
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.