Hammer285

Sent you a DM. We'll chat tomorrow and try to set something up.

Hey Fergusfw, sorry but I'm just looking to sell locally. Appreciate the interest.

Sold

Up for sale is a Gen2 Kel-Tec Sub2000 (Sub2K) in 9mm that takes Glock 17 mags. Comes with 2 Magpul G17 mags and a Magpul AFG. How much? $400 What is the round count? 150 Any blemishes? Standard wear on internals for the round count One circular mark on the outside of the barrel from an M-Lok over-tightening (highlighted in pics) Marked out serial number in pics (FYI) What's in the box? Kel-Tec Sub2000 9mm Pistol Caliber Carbine Magpul Angled Foregrip (AFG) 2 Magpul G17 magazines (if you want) I can throw in a gun lock Why would you sell such a great PCC? I just bought the new Gen3 version which has a twist to the folder and allows you to keep a dedicated optic on the rail. As much as I'd love to keep this one as a backup, the wife shoots me dagger eyes whenever I come home with a new toy, so I have to sell this one to offset the cost of the new one. Looking for any trades? Not currently, just cash. What are your terms for sale? Face-to-face sales only - facilitated in the Mount Juliet, TN police department headquarters parking lot designation for person-to-person exchanges. This cuts down on scams and counterfeit cash deals. Must have valid TN Carry Permit Must be legally allowed to purchase a firearm Cash only. Email with any questions.

Up for sale is an M&P Shield in 9mm with lots of extra mags (some with extensions) and an upgraded Apex Trigger How much? $375 What is the round count? 300-350 Any blemishes? Standard wear on internals for the round count Nothing external Some light holster wear Marked out serial number in pics (FYI) What's in the box? M&P Shield 9mm with Apex Trigger Action Enhancement Trigger & Duty/Carry Kit for M&P Shield 6 OEM Magazines 1x standard 8 around magazine with floorplate 3x standard 8 round magazine with extended grip floorplate 1x 10 round magazine (+2 extended mag) 1x 11 round magazine (+3 extended mag) (if you want) I can throw in a gun lock Why would you sell such a great pistol? I bought this a years ago and it has been collecting dust lately. I carry a Sig P365 due to my little girl hands so this is never going to get much use from me. Would rather it go to a good home where it will get some EDC and range pew time. Looking for any trades? Not currently, just cash. What are your terms for sale? Face-to-face sales only - facilitated in the Mount Juliet, TN police department headquarters parking lot designation for person-to-person exchanges. This cuts down on scams and counterfeit cash deals. Must have valid TN Carry Permit Must be legally allowed to purchase a firearm Cash only. Email with any questions.

Bump

Replying to PMS now. Wasn't getting notifications from TGO so apologies for the delay.

Up for sale, a lightly used Rossi R92 Lever Rifle .45 LC 24in Octagon 12rd Brass Wood How much? $700 What is the round count? 100 Any blemishes? Standard wear on internals for the round count A few spots on the brass I couldn't seem to get cleaned off. What's in the box? Rossi R92 Lever Rifle .45 (Model R92-52004) User Manual Original box (if you want) I can throw in a gun lock Why are you selling magnificent lever action rifle? I bought this from my brother a while ago, who needed cash at the time. I have enough mouths to feed with my collection, and don't want to add .45 long colt to the mix. Looking for any trades? Not currently, just cash. What are your terms for sale? Face-to-face sales only - facilitated in the Mount Juliet, TN police department headquarters parking lot designation for person-to-person exchanges. This cuts down on scams and counterfeit cash deals. Must have valid TN Carry Permit Must be legally allowed to purchase a firearm Cash only. Email with any questions.

Glock 26 Gen 5 - subcompact 9x19 MM w/ night sights Up for sale, a lightly used G26 Gen5 with night sights and all accessories. How much? $550 What is the round count? 150 to 200 Any blemishes? Standard wear on internals for the round count Nothing external No holster wear Marked out serial number in pics (FYI) What's in the box? G26 Gen 5 with AmeriGlo bold night sights 3x 10 Round 9x11MM magazines Optional backstraps Cleaning rod and brush Glock mag/speed loader Case User Manual (if you want) I can throw in a gun lock Why would you sell such a great pistol? I bought this from my brother a while ago, who needed cash at the time. Been sitting in my safe ever since. I carry a Sig P365 due to my little girl hands so this is never going to get much use from me. Would rather it go to a good home where it will get some EDC and range pew time. Looking for any trades? Not currently, just cash. What are your terms for sale? Face-to-face sales only - facilitated in the Mount Juliet, TN police department headquarters parking lot designation for person-to-person exchanges. This cuts down on scams and counterfeit cash deals. Must have valid TN Carry Permit Must be legally allowed to purchase a firearm Cash only. Email with any questions.

Wait, I thought we were supposed to fire them through the front door? Maybe he'll clarify that for us in the next AWB bill.

Thanks guys, the "Signature of Official Taking Prints" threw me off, thought it had to be someone in law enforcement.

I just filed a Form 1 for an SBR, paid the $200 extortion fee and received the confirmation email from the ATF eforms site. They require the fingerprint card to be submitted within 10 business days from the form submission. Here's my dilema, every police department and Sheriff's office I have reached out to states they are not doing fingerprints due to Corona-virus right now. Questions: Are there any alternatives to in-person CLEO fingerprinting with the Form 1's? I had a Form 4 submitted for a suppressor in 2019 which was approved/issued in summer of 2020. Would the fingerprints on file with the ATF for that work for this Form 1? I reached out to the ATF regarding this, but don't expect a quick response so figured I'd reach out to the group here. How have you all been doing this since law enforcement stopped processing the fingeprint cards? Any help is appreciated.

Agree. I'm a lifetime member of NRA, but obtained that well before they started letting things slide. GOA and Firearms Policy Coalition get my money these days.

Yeah, I'm going to keep giving it a go, but did just buy a San Tan Tactical barrel in case it doesn't work. https://www.santantactical.com/stt-ar15-barrel-223-10

I am having a bear of a time getting the taper pins out of an A2 front post. I do not need the sight, and am replacing it for low profile adjustable gas block to properly gas a new suppressor. What I have done so far: Hand guard is off. Brake removed. Gas tube roll pin is out. Gas tube removed. Barrel Removed from upper. Measured taper pins on both sides to verify the correct side to slam (hitting the 0.12 side v 0.14 side) I started hammering away with the punches and the pins didn't budge. I noticed both sides of the taper pins were a little mushroomed, so I shaved down one to cut that tip off and went back to hammer. I have had absolutely zero movement or luck. I have broken two steel pins at this point and am giving up. I really would prefer not to have to buy the Brownell's A2 sight pin block for this as I'm just tossing the sight. I have watched numerous videos of people doing this, some make it look easy, some hard, but none impossible. Starting to think there is something wrong. Does anyone have any advice, tips or ways to get this thing off without damaging the barrel? Hammer the sight off, cut it with a small angle grinder/blade, etc.? If there is a gunsmith out there willing to do this for some $$, I would gladly ship it out with a pre-paid return box to get this done and turned around fast.

Hi TGO crew, I have a question to pose. With OCR (optical character recognition) tech out there and the dark web where people buy and sell stolen goods, wouldn't it be awesome if there was a way for people to look up lost or stolen firearms using the serial number and have a system that could search images in those dark web sites for the serial number on uploaded images by the thives? Was thinking about this and wondered if it existed, and if it didn't - whether or not we'd want a way to run searches. Most of the time the police will take a report and check local pawn shops, and that's it...but what if you could do the search and give the info to law enforcement? Thoughts? Sent from my SM-T810 using Tapatalk

Got one of those. I'm more concerned with acts of God other than thieves. Figure insurance is cheaper than a 6-10k safe rated at 3 hours fire protection. I'll let you know what I find out. Sent from my SM-G930V using Tapatalk

We use Encompass but I didn't see any rider options for firearms. I'll double check but their primary coverage is only for theft...so fire, tornado, etc. so they probably don't offer much. Sent from my SM-G930V using Tapatalk

One is an original (lower at least) Colt 1911, government issued...the other a Remington 1903 with all original parts. Guessing when combined, a min of $1500, max $4,500. The notarized statement is a good idea. I'll bring that up, thanks. Sent from my SM-G930V using Tapatalk

Yes, they use the ArmsCare Plus plan for this (which is the one I was interested in), and require proof of ownership, including the statement regarding a gift or inheritance. I may reach out to them and define what their statement must consist of, and whether or not I have enough information to prove that. Thanks Omega.

I searched for this topic but came up with nothing, so if you know of another thread and can point me in the right direction, I'd appreciate it. Issue (I'll keep it as brief as possible): Estranged father-in-law passed last year. My wife was his only daughter (he was not married and had no other children.) He lived with his 92 year old mother and owned no real property (house/car/stocks) When he passed, we gave most of his belongings to Goodwill - mostly clothes, some furniture. There were a few firearms that may be worth anywhere from $2,000-$4,000. There was no will, trust, or instructions for his belongings, and due to no real property, there was no probate or debts to settle. My wife knows I'm a "firearm enthusiast", or as she affectionately calls it "a gun nut", so she said to take the firearms. In addition to these, I have a nice collection myself worth more than my homeowner's insurance and standard NRA benefit($2,500) would cover so I have been looking at additional options to cover the remaining value. Most companies I've looked at require specific information to prove ownership, including either a receipt, name and number where purchased or statement regarding a gift or inheritance. Question: Based on the info above, how would I go about proving ownership of these firearms for insurance purposes if a claim were to be filed? Any assistance would be appreciated. Thanks in advance!

After watching the first Terminator movie I went out and bought a phased plasma rifle in 40 watt range. Couldn't help it. Sent from my SM-T810 using Tapatalk

Well it arrived today. Laser definitely needed some adjusting, but all in all, it's a solid piece. Looking forward to taking the wife out with it. I'll let you know what I think after firing it. Sent from my SM-G920V using Tapatalk

Thanks for all the responses. I'll let you know how the wife takes to it. If she hates it, I'll just grab an ankle holster and use it as a secondary EDC. Sent from my SM-G920V using Tapatalk

Just ordered an MP Bodyguard revolver to help get the wife into shooting. Anyone here have experience with this wheel gun? I have a S&W model 15 that's treated me well, but the bodyguard is a shorter barrel and has some polymer in it.