Jump to content

up2snuff

Inactive Member
  • Posts

    60
  • Joined

  • Feedback

    0%

Everything posted by up2snuff

  1. I had a similar problem and it was caused by the mags. They were applying to much spring force at the rear of the follower. I remedied this by bending the end of the top coil of the spring up so that it made contact with the front of the follower (the end the rounds come out). I did it with needle nose pliers and bent about 1/2" back from the end of the coil at about a 30 degree angle. This may not have anything to do with your issue but it may be worth of look. Good luck. Sent from my iPhone using Tapatalk
  2. So, everyone 12th and below made no significant contributions to the country. Sent from my iPhone using Tapatalk
  3. That is great info. Thanks for the update. Sent from my iPhone using Tapatalk
  4. I believed it went into effect last summer. Sent from my iPhone using Tapatalk
  5. 50-1-312. ((1)(A) No employer shall discharge or take any adverse employment action against an employee solely for transporting or storing a firearm or firearm ammunition in an employer parking area in a manner consistent with 39-17-1313(a). Sent from my iPhone using Tapatalk
  6. Clowntards! I almost hate to say it but it fits. Play stupid games........... Sent from my iPhone using Tapatalk
  7. Remembering him and Richard Prior in the "Silver Streak". Funny movie. RIP Gene. Sent from my Nexus 7 using Tapatalk
  8. I agree that the M1 would make a good zombie gun. At 100 yards it has about the same energy as the muzzle energy of a 357 Magnum with an equivalent bullet weight. Sent from my Nexus 7 using Tapatalk
  9. I'm interested. I'll drop you a PM. Sent from my Nexus 7 using Tapatalk
  10. Negative on the knife. I am open to any of the others depending on the type of hunting. If it is a stalk I would prefer to use a rifle or pistol. Sent from my Nexus 7 using Tapatalk
  11. Yes I would. Look like fun and I have heard they are good eating. Don't know much about it, or have a place to go. Thought a paid hunt might be a good way of getting some experience. Sent from my iPhone using Tapatalk
  12. When deer season ends I get the hunting withdraws. To ease the withdraw symptoms after deer season this year I want to go on a hog hunt. I have heard of reasonably priced outfitted weekend hunts in Texas, but it is hard to tell what you get for your money. Have you been on any hog hunts that were great experiences? Where did you go? How was the hunting, accommodations, and guides? What was it day or night hunting? What was the cost? And anything else that you care to share. Thanks in advance for your responses. Sent from my Nexus 7 using Tapatalk
  13. A couple years ago I saw a Knights Armament M110 sniper rifle and thought that style of rifle would make an awesome deer hunting rifle. I started researching and was heading down the path of doing a ground up build. As others have already mentioned parts are not standardized among manufacturers so you have to buy the upper and lower receivers and associated internals from one manufacturer. For the most part you can buy every thing else from whoever. Since I am a budget minded enthusiast, I learned that I could buy a complete rifle for about $300-$400 less without sacrificing my goals. I ended up buying a PSA PA-10, 20" SS free float barrel, 15" Midwest key-mod handguard, and a NIB BCG. I purchased the complete upper and lower separately when they went on sale. The rifle has functioned flawlessly, but I expected that from PSA. For me the gamble was the barrel, but as it has turned out I can consistently shoot sub-moa groupings with it. I really enjoy shooting the rifle and love the ergonomics for hunting. Good luck and I hope this helps. Sent from my Nexus 7 using Tapatalk
  14. When you have those 30 rounds mags in the gun it shoots better if you hold it sideways. Sent from my iPhone using Tapatalk
  15. Just one is a pretty abstract thought for me. I prefer to pick the tool based on the job. Based on what is going on today I would pick my PA-10. The .308 is a good all around hunting round. The high capacity semi-automatic capabilities could be handy in other situations. Sent from my iPhone using Tapatalk
  16. Dude, I was just picking up some envelopes to mail some letters. Sorry you didn't like my attire. Just kidding. Might be someone on the forum though. Good job keeping your eyes open. I am glad there are people like you ready to take action to protect themselves and potentially others. Thanks. Sent from my iPhone using Tapatalk
  17. If you have a smart phone or tablet you can download an app called "Wikiarms". It will allow you to search .30 ammo deals, or any other ammo you are looking for. Good luck. Sent from my iPhone using Tapatalk
  18. I think he need a taller sight mount. Sent from my iPhone using Tapatalk
  19. He is risen. Alleluia! Sent from my iPhone using Tapatalk
  20. It looked that way to me too. Just curious if there was anything else it could used for. Thanks Sent from my iPhone using Tapatalk
  21. It may just have been a hammer mistaken for a Glock. :) Sent from my iPhone using Tapatalk
  22. I don't see myself ever hanging a bayonet off the front of an AR. It might make for some cool gun porn, but not my thing. My question is are there any other practical uses for the bayonet lug? I have seen a few adapters for mounting stuff but the looked light duty and weak. Has anyone used anything that worked well, is durable, and they like? Rail adapter? Flashlight mounts? Stuff like that. Just wondering. Thanks. Sent from my iPhone using Tapatalk
  23. I wish I had know these things multiply like rabbits. Sent from my iPhone using Tapatalk
  24. This topic should be called "PSA Love". I can get behind a product that has a good value equation (=quality/$). Sent from my iPhone using Tapatalk
  25. Two big thumbs up on the PSA Premium CHF mid-length upper 1:7 twist 5.56. The barrels are made by FN and are essentially an M249 barrel. Mine are tack drivers. Never a problem. Sent from my iPhone using Tapatalk

TRADING POST NOTICE

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions.

TGO makes no claims, guarantees or assurances regarding any such transactions.

THE FINE PRINT

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

TNGunOwners.com (TGO) is not a lobbying organization and has no affiliation with any lobbying organizations.  Beware of scammers using the Tennessee Gun Owners name, purporting to be Pro-2A lobbying organizations!

×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines
 
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.