Jump to content

asu174

Lifetime Benefactor
  • Posts

    196
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by asu174

  1. Agree on all points, however that’s not what that quack article says- not even close.
  2. You spreading this complete bull#### is the problem…not the “jabbed”.
  3. Gorgeous. Don’t need anything that big, but these are still tempting.
  4. Alright, it’s a complete rifle again (not just the upper). Picked up a 733 upper for an SBR and selling this whole rifle. $680
  5. Budget would be a big help.
  6. Glock 45 uses Glock 17 mags. 9mm. Not 45ACP. This is a G19 for G17 mag deal.
  7. That’s why shipping sealed box, pre-labeled “machine parts” is generally more cost effective. GLWS. Rami was one of my first guns ever right when they came out in the early 2000s. They are very reliable.
  8. He said the 19X model (in general) is a sweet shooter.
  9. Grabbed a 457 Trainer recently. They are awesome guns. GLWS!
  10. Location is Blackman/Murfreesboro. Wiling to meet within a reasonable distance, but my schedule is insane M-F, so those days are “you come to me”. Must be Tennessee resident/of legal age and willing to show ID. I accept cash and Venmo/Paypal. This is a private party transfer. No trades, thinning collection. Gen 4 Glock 19C w/ tiN barrel, Jajerwerks slide work, Apex trigger, Trijicon HD night sights Loaded Glock 19C. This is the factory ported C model, which is harder to find at times- was borderline impossible when I grabbed this one. Even right now, I’m struggling finding any for sale. These are great because you can toss a non-ported barrel in and have the best of both worlds if you don’t want to run compensated for some reason. Purchased new by me, low round count, little use (reason for the sale). Shoots really flat, looks sharp, fully loaded with lots of add-ons. Trijicon HD night sights- orange front Jagerwerks slide work- serrations and lightening cuts done to factory slide- looks FANTASTIC. Factory C barrel polished and gold TiN finish- done by Brazen Firearms Glockmeister stainless captured recoil spring Solid aluminum rear slide cover (no writing) Apex trigger Ghost 3.5 connector Extended slide stop Magpul magwell 1 15 round mag, 2 10 round mags (came w/3 10 round mags) Backstraps, original box, loader $700 Flash makes the barrel look yellow in some pics. It’s a shiny gold.
  11. Thanks for clarifying the P M bit. That’s about what I gathered from the thread I referenced above. I barely leave my house now that I work from home, let alone get to Eastern TN, unfortunately.
  12. Location is Blackman/Murfreesboro. Wiling to meet within a reasonable distance, but my schedule is insane M-F, so those days are “you come to me”. Must be Tennessee resident/of legal age and willing to show ID. I accept cash and Venmo/Paypal. This is a private party transfer. I’m hopefully going to be thinning out my collection by a considerable amount. I’m just not shooting as much as I used to and I have some pretty good stuff collecting dust. I have lots of extra mags and other accessories available, although I’m probably not going to package any optics. Got this upper in trade recently. One range trip, zeroed with a dot, put back in safe. The upper was on one of my SBR lowers, not pictured. My dilemma is that I can’t bring myself to pin and weld the flash hider on, but I don’t want to use one of my SBR lowers for this upper. So, I’m very carefully listing these two items together knowing that you will pin and weld this flash hider. It’s a BCM A2X, shown next to a standard A2 for comparison. If you’re only interested in the upper, we can talk, but most of the value here is in that upper. Upper: Colt SOCOM 14.5” unpinned barrel, 1/7 5.56 M P BCM A2X flash hider (can remove and put regular A2 on for you) Flattop receiver Samson folding rear sight AIM Surplus Nickel BCG BCM Charging Handle- Large latch Lower: KE Arms KP-15 polymer lower receiver- extended hammer pin, QD rear socket (not installed at time of pic) Larue Tactical Flat 2-stage trigger (breaks clean at 4 lbs) 30 round aluminum USGI mag or PMAG, your choice (not pictured) Asking $650 for both upper and lower…go get this flash hider pinned, please. CLOSED
  13. Back to a complete rifle again- need to get rid of things. Location is Blackman/Murfreesboro. Wiling to meet within a reasonable distance, but my schedule is insane M-F, so those days are “you come to me”. Must be Tennessee resident/of legal age and willing to show ID. I accept cash and Venmo/Paypal. This is a private party transfer. I’m hopefully going to be thinning out my collection by a considerable amount. I’m just not shooting as much as I used to and I have some pretty good stuff collecting dust. I have lots of extra mags and other accessories available, although I’m probably not going to package any optics. Got the upper used on ar15.com from a Colt purist. I don’t really get any of that and have probably pissed on Sammy Colt’s grave by slapping this upper on a polymer lower. This rifle was brought to the range once, test fired, and stored. It’s a KE Arms KP-15 polymer lower that I absolutely swear by for weight, durability, and ergonomics. It’s 5 lbs, 8 ounces unloaded. Upper: Colt 6720 Barrel- 1:7 5.56 C MP Shiny 6 hole retro handguards A1 upper marked “P M”- I skimmed a mile long thread on a forum about the origin of these receivers, but I believe it’s Colt BCG included (phosphate- likely AIM Surplus, little use) New charging handle Lower: KE Arms KP-15 polymer lower receiver- extended hammer pin, QD rear socket Milspec Trigger 30 round aluminum USGI mag $680
  14. It’s likely from AIM Surplus, but could also be a Toolcraft/PSA. I’ve lost track.
  15. Location is Blackman/Murfreesboro. Must be Tennessee resident/of legal age and willing to show ID. I accept cash and Venmo. This is a private party transfer. NO TRADES. I’m hopefully going to be thinning out my collection by a considerable amount. I’m just not shooting as much as I used to and I have some pretty good stuff collecting dust. Picked this up used about 6 months ago. Original owner said he bought in the 90’s and had it in the back of his safe. I have shot about 25 rounds of 00 buck through it. Added a side saddle (removable) and upgraded the follower to an aluminum one. I think it’s pre-ban, but not sure how relevant that is here in TN. Original chokes, box, included. Asking $1300
  16. Location is Blackman/Murfreesboro. Wiling to meet within a reasonable distance, but my schedule is insane M-F, so those days are “you come to me”. Must be Tennessee resident/of legal age and willing to show ID. I accept cash and Venmo. This is a private party transfer. I’m hopefully going to be thinning out my collection by a considerable amount. I’m just not shooting as much as I used to and I have some pretty good stuff collecting dust. I have lots of extra mags and other accessories available, although I’m probably not going to package any optics. This rifle was brought to the range once and zeroed with an optic that is no longer on it. Round count is less than a magazine. It’s a KE Arms KP-15 polymer lower that I absolutely swear by for weight, durability, and ergonomics. Upper is a complete Stag 16”. All purchased in last 6 months. It’s 5 lbs, 13 ounces unloaded. Upper: Stag Arms 16” Factory Built Upper with 1:7 twist barrel and MLok handguard BCG included Strike Industries charging handle (blue) Magpul MBUS sights Lower: KE Arms KP-15 polymer lower receiver- extended hammer pin, QD rear socket Larue Tactical Flat 2-stage trigger (breaks clean at 4 lbs) 30 round M2 PMAG Asking $700
  17. Location is Murfreesboro/Blackman. Must be TN resident and willing to flash ID. No paperwork please- private party sale. NO TRADES Glock 19X. I haven’t shot it much and when I did, it had a threaded barrel and compensator on it, so I’m actually not sure if the factory barrel has even been shot. Very little use, which is why I’m selling it. Important note: the front tab on the bottom of the grip has been shaved off and polished. Yes, it’s a turn off for the Glock purist, but with that tab, Gen 5 magazines with the longer base don’t fit in a supposed early Gen 5 gun. After one failed mag change, I figured life/death was more important than the most useless feature Glock has ever added to a pistol. It looks pretty smooth, but some of you 1000+ grit nerds can get it better. Info here: I admittedly only made it about 30 seconds in because my modification solves this problem- Original stuff included, although the original sights are gone. It has Trijicon HD sights with an orange front. Also included is a Parker Mountain Machine compensator, but you will need a not-included threaded barrel for that to work. Add an Apex trigger and connector in red or black for $70- butter smooth with it installed. I can also sell you 9MM ammo (range or SD) at a below insane market value/above super low 2019 price point. $700 w/factory trigger, no ammo
  18. Sold Location is Murfreesboro/Blackman area and would like to sell nearby. Must be Tennessee resident. Not looking for trades. Cash, Venmo, etc. This is a lightly used GWACS MKII lower. I’ve probably had it 5-6 years and haven’t shot it much. It has a brand new trigger group in it, ambi safety, standard buffer and spring. It has a QD socket on the right side- used to run my slings around the receiver. Slap an upper on it and you’re in business with a super lightweight build. Contrary to popular belief, these are remarkably durable lower receivers. The one piece design makes them extremely rigid compared to any other polymer receiver. I have others, just have no plans for this one. $130

THE FINE PRINT

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions. TGO makes no claims, guarantees or assurances regarding any such transactions.

×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines
 
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.