Jump to content

glock55

Members
  • Posts

    542
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by glock55

  1. I run an Eotech on gun for field of view but a pricey option. A before you retire purchase option. i have the Romeo 5 on my other gun. An excellent sight for the money. An after retirement option. Both are great but I favor the Sig for the auto on/off feature.
  2. I have the rcbs plate under my rock chucker press and rcbs bench primer. They work great and easy removal for cleaning or if i just need them out of the way for other projects. Highly recommend.
  3. Take cover off rear of slide, remove firing pin and take slide off.
  4. check ground at 110 should be 12gauge wire left frame rail under driver door. Also may need to program unit. Seems like I recall having to program vin and wheel size in order for all ecu’s to communicate. Been awhile since I worked on small gm units so memory is foggy.
  5. My wife and I file jointly and got $545 back this year. We had the refund in the bank one week after filing. First refund in over 10 years so after paying $1200 last year we are more than happy. I plan on retiring this coming November so not sure what to expect for next year. Have been doing some preliminary looking into Medicare and such but didn’t realize how much is involved. Am thinking I may need a financial advisor to guide me through all this.
  6. Very nice. Will make a fine addition to the family.
  7. glock55

    ...

    I have the following factory AR- 15: 1) Rock River Arms LAR Carbine. Have had for about 9 years and has been a great rifle. No issues of any kind. The only issue I would say I have is it seems to be rather heavy,however not so heavy to prevent me buying it again. 2) LWRCI-DI. Have had for about 6 months and am totally amazed by this gun. It it lightweight, accurate and feature packed. It has Fully Ambidextrous Lower Controls, a keyless bolt carrier and many other feathers. I have had no problems of any kind with this gun. There may be better Rifles out there but I think I’ve found the right one for me. I am planning on buying the R.E.P.R MK 2 before the end of the year. I bought the gun from the gun crew so if your close you may want to stop and check one out.
  8. If gun store sales have slowed down as much as gun sales in our classified section have slowed, I would not be surprised to find that more guns have been stolen from gun stores than have been sold in gun stores the last couple months. We all know the libs are going to point out that there has to be a corolaltion between the rise in gun crime and this influx of stolen guns hitting the streets. I think we all know were this is going to end and that’s with more gun control laws and the banning of certain weapon platforms. While I know there are many factors that play into the degredated direction our society is moving we all know the libs will see more gun laws as an easy visible vote getter. After all who amongst us is not for safer streets as we are seeing more guns on the street = more crime on the streets therefore fewer guns on the street = less crime on the streets. I’m afraid the ones who are going to pay the price are the law abiding gun owners. I have always tried to buy and support our locale gun shops but I have decided that I will only purchase online from this point forward. If local gun shops cannot support common sense gun security I cannot in good concience support them. I believe each one of us on this forum expect every member to practice common sense gun security and keep our weapons out of the hands of criminals. Why should we expect any less from a gun shop. I know security comes at a cost and we as gun buyers may have to pay more so shops can provide it but compared to the cost of a human life taken by a stole gun I’m willing to pay it. Everyday the news reports a shooting and sometimes 3 to 4 a night then I in good conscience have to say enough is enough. I’m sure each person on this forum could list at least ten things every gun shop could do to secure their firearms when closed. I know these things will cost money but many be in this world today that’s the price of doing business in that industry. If a shop can’t afford to secure the inventory then perhaps they can’t afford to be in that business. I struggle everyday to educate those I come into contact with about responsible gun ownership. It has cost me time, money to take people shooting and show them the joy of the sport. I spent time trying to raise two boys to be responsible gun owners and responsible citizens. I have given money supporting candidates who I feel will further our cause in politics. I bought a three thousand dollar safe to secure my weapons and ammo so why should I expect a gun shop owner to do less. I DONT expect any less! Sorry about this rant and thanks for taking the time to hear me out. Please don’t take me as a anti gunner for nothing could be further from the truth. I just believe that every gun store break in erodes our gun rights a little more. I have a grandson that I want to know the joys of gun ownership as I have but it seems less likely everyday. I just think if the politicians can’t figure this out, and gun shop owners won’t figure this out then we as gun owners neede to try to figure it out.
  9. I am trying to renew membership but am running into problems. I try to add one year membership to cart but says can only purchase one. Mine is expired so I guess I’m missing something. Can someone tell me what I’m doing wrong. Thanks
  10. I would think your using R134A as refrigerant. If so what type of oil did you put in the system. Most 134a uses pag oil although that is changing. Also how much oil did you add. You must add for compressor, dryer and both coils. Your kit should have advised how much to add for dry system. If not dry did you flush old oil as they do not mix. 134a pressures run about 17/25 on low side and 165/185 on high side. The fan should come on around 325, however your probably running a direct drive fan on that car. If low side is low the following should be checked evalve, hoses for frost rings and correct freon charge. Reguarding oil we always drain new compressor then add correct amount accounting for a new dryer also. Lastly make sure belt not too tight. I suppose this system is an aftermarket add on? If so I would ck the following: 1) what is the head pressure 2) belts for alinement, also that the belt is not running too deep in a pulley. The belt should not run in the bottom of any pulley. The tension can be correct but if belt is to deep it will squeal. Have run across this with aftermarket kits mixed with factory pulleys. A picture of the belt routing might be helpful.
  11. I suppose this system is an aftermarket add on? If so I would ck the following: 1) what is the head pressure 2) belts for alinement, also that the belt is not running too deep in a pulley. The belt should not run in the bottom of any pulley. The tension can be correct but if belt is to deep it will squeal. Have run across this with aftermarket kits mixed with factory pulleys. A picture of the belt routing might be helpful.
  12. So I finally decided it was time to replace my $300.00 gun safe with a more substantial safe. After a couple visits to The Safe House i purchased the Superior Master Series SM 40 gun safe. Thanks to Nancy for her patience in answering all my questions. Although not my first choice I will be placing the safe in my attached garage which is cover by my alarm system. The garage door opens to the back yard so it will not be too visible when the door is up. I have read that placing the safe on concrete will require the use of some type of vapor barrier. My question is what would be the best barrier. I have thought about this and am thinking about sealing the floor were safe will sit with drylok and then laying a 20 mil vapor barrier down before they install the safe. I know they will drill through this when they bolt the safe down but I think it will be ok. I just wondered if anyone else had dealt with this issue and how did y'all solve it. Also do y'all think drylok and barrier would work. Thanks in advance for any help.
  13. You might included a home warranty with the sale. You can get them for around 600 hundred dollars. They can cover seller and buyer. Get one and have the warranty repair before sale
  14. Glock is located in Atlanta. I have found the techs that come out to get the guns are helpful and willing to answer any questions you have. Worth the trip if for no other reason than to see the mother ship.
  15. If night sights will work you can get the Glock steel factory night sights for $57.00 from Glock. I have switched from tru Glock to these largely due to cost. Easy to install and work great.
  16. I have an Ergo trirail on my Mossberg 590a1. The fit and finish are great. I checked their web sight and they make them for the Remington also. Ergogrips.net
  17. No! It would not have made the appropriate ( radical ) political statement.
  18. I have a fluke 117 at work and highly recommend it. Some of the other guys have craftsman and they seem to do a good job. With the number of computers on trucks now a days I just feel more comfortable with fluke.
  19. You don't say what type of gun you are carrying but I have a Galco m6 x for my Glock 19. Is auto retention with a thumb release. I don't open carry very often but find this holster very good
  20. Thanks to everyone for all the responses and information. Although it sounds as if this gun has a few quirks I think it's just what I'm looking for. The only thing that really concerns me is the magazine disconnect as I am not a fan of these. Can anybody recommend as gunsmith they trust to remove the disconnect and upgrade the trigger. As I tell my friends at work if you spend ten minutes on TGO your going to learn something new. Once again y'all haven't disappointed. Thanks for the help and Merry Christmas to all.
  21. I plan on adding a High-Power to my gun collection after the first of the year. I feel I have a good variety of guns to meet my self defense needs so that will not be the reason for this purchase. I am buying this gun with the intention of passing it down to my sons when the time comes. This will be the reason for most of my gun purchases in the future. I would like to pass on guns that have some significance in firearms history. Having spent most of my focus on Glock pistols I am not familiar with the High-Power at all. I fact I don't recall ever having laid eyes on one. I have researched the pistol and it does seem to stand out as an interesting firearm. I would appreciate any input on this gun as far as the following is concerned: 1) is this a reliable firearm 2) are there any common issues with I should know about 3) is my research correct is this an important firearm from historical perspective I appreciate any help y'all can give and any recommendations on other firearms that would be interesting pieces to pass down would be appreciated. Thanks
  22. I have the stainless steel comander sr1911. I have 500 rounds of Winchester white box through it without any issues. That is with chip McCormick and ruger mags. You might give a different ammo a try. I'm thinking about picking up a 5" barrel version in the near future. Hope you get things worked out
  23. The 23 sights will work on the 43 but they will hang over each side of the slide.
  24. The front sight on all Glocks are the same. The difference is in the rear sights. The 42/43 rear sight is 6.1 mm high were as the standard height on the glock 23 is 6.5 mm high. Glock sells a 6.1 mm high rear sight part number nr17g25 that fits the glock23. This is the standard height rear sight for the Glock 17 long slide. You would have to adjust your hold as needed. If the TFX sights measure according to this they will work. I have run truglo tfo on all my guns but the last three Glocks I bought I put Glock factory night sights on. The set costs $57.00 and I install. I feel they glow as well as any for half the price.

THE FINE PRINT

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions. TGO makes no claims, guarantees or assurances regarding any such transactions.

×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines
 
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.