alwayspackin

I have owned every laser out there. The laser max is by far the best. I have several thousand rounds on mine. For the pf9 the arma laser for the price is the way to go. Drop tests on the arma are out of this world. And yes lasers are for play most of the time. The laser max is the best over all.

I have traded for a few. The trigger is a easy fix. Takes 5 minutes and its better than my glock. Pm me for instructions for a trigger job on the sigma. They r very accurate little guns. They make good vehicle guns. IF they get stolen you don't have very much into it.

You yourself said you stayed in the lane for about a mile. After you passed him you should have returned to the right lane. If you take it to court you will loose. And also have to pay court cost plus your ticket. Sorry, but the law is what it is!

I had the barrel on my glock 26 done a few years ago. It looks really nice. It cost me 50 dollars with shipping. I searched for it online and then just picked one. I can't remember who I used but it only took a few days. It is the best bang for your buck if you’re sporting up your gun. There are two types of jewelling. Small jewels and large jewels. I went with the large jewels; the small jewels appeared to me to have too much going on. I have shot several hundred rounds threw it since then and it still looks the same. You will have to make sure to keep a little extra oil on the barrel, since they remove the finish to bring out the stainless steel.

Magnum primers are around all the time. Try the reloaders bench in Mt. Juliet. Also you can use small rifle primers. Regular small pistol primers seem be very hard to get.

I have one in my glock 26 and love it. I have had every kinda of laser they make at some point and the lasermax is by far the best.

I had a simple sight job by the On Target rip off shop and will never go back. It was ridiculous what I paid. They are very arrogant and rude at this place.

You can't worry about being sued. You can be sued for anything. And if you can't afford an attorney one will be appointed (man I have heard that phrase a million times). If a weapon is being banished there will definitely be a body lying on the floor. If you second guess it you will be lying on the floor instead of the bad guy.

The Outpost on the other side of Murfreesboro usually has a few. I would call before I made the drive for just ammo cans.

Thanks for all the info. I up the powder charge and every thing went great. Shot my glock 22 and glock 26 with no problems. Also no problems with any other guns. I will post results and test info soon. I wish everybody owned a chronograph and had a place to set it up. When you live in the city and have to pay range fees it adds up.

Thanks for the info. I ran the 40 load threw a glock 22 and a m&p with no problems. The 9mm load was ran threw a glock 26 and would not cycle. Sounds like I need to increase the charge alittle to me.

After a few tests, I am set on 4.7 grains with a 180 grain bullet in .40cal using winchester 231 and magnum primers. These seem to be pretty hot but are pretty accurate. I like my loads to have a little punch to them anyways. The 9s seem to need a little more powder to cycle the slide more. I was just seeing if anyone else how any info here. I was thinking that the OAL might need to be adjusted. I was setting them at 1.130.

I loaded some 9mm 124gr with Winchester 231 and magnum primers. I reduced the load by 10%. All loads were between 3.5 to 4.0. None of them would eject. Had jams, stove pipe and etc. It looks like my extractor is bent now. The last round at 3.8 would not eject at all and had to do some real pound on the slide to get it back. Has anybody else used the magnum primers in 9mm? If so, what was your load and how much did you reduce it? And yes, these are some of my first reloads. All of my .40s reduced by 10% worked great. But the 9mm suck.

The bit flexing? I don't understand. If you are using a pipe vise and a drill press then it should be strait. If it is the bit, then you need some better drill bits. Not the cheap set. Buy one good single bit at Lowes in the size you need.

I have to have one of those. I know just the think to do with that. Next saturday will be awesome after all.

The laser max is worth the money. I love my pulsating laser guide rod. The pulsating one is easier to follow and find then my steady beams. Make sure it fits your holster first. I have an arma laser on my p11, which is very durable. The drop test on the arma is very good. Look for videos and reviews before you buy any laser. You tube is a great source for videos.

One on one, you better fight first then kill the SOB. The jury will go threw it with a fine tooth comb. Multiple people around then yes you could say you where in fear of your life and be justified. Your wording is everything in a situation like this. I would recommend asking for an attorney when the police arrive just to buy yourself some time to calm down. You can always explain yourself after asking for an attorney. All it takes is for you to say the wrong thing and you are going to the pokey!

Just received this from the Feds. Tried to post the actual email but it was locked down. It took allot just to get this out. It is not classified info if there are any eyes watching! UNCLASSIFIED FEDERAL BUREAU OF INVESTIGATION SITUATIONAL INTELLIGENCE REPORT Little Rock Field Office (U) Recipients are reminded FBI Situational Intelligence Reports contain sensitive information meant for use primarily within the law enforcement and homeland security communities. Such reports shall not be released in either written or oral form to the media, the general public, or other personnel who do not have a valid need-to-know without prior approval from an authorized FBI official. Precautions should be taken to ensure this information is stored and/or destroyed in a manner precluding unauthorized access. (U) Recipients are reminded FBI Situational Intelligence Reports contain sensitive information meant for use primarily within the law enforcement and homeland security communities. Such reports shall not be released in either written or oral form to the media, the general public, or other personnel who do not have a valid need-to-know without prior approval from an authorized FBI official. The Situational Intelligence Report has been developed to facilitate timely communication of relevant, localized intelligence from the Little Rock Division Field Intelligence Group (FIG) to state and local law enforcement. 28 April 2009 (U) Report of Faulty .40 Caliber Ammunition (U) On 15 April 2009, the FBI Training Division advised recently tested .40 service ammunition provided by Olin-Winchester was defective and did not perform to acceptable law enforcement standards of accuracy when tested by the Defensive Systems Unit (DSU) at the Ballistic Research Facility, Quantico, Virginia. (U) DSU conducted a test of Winchester .40 service ammunition, Winchester Q4355, specifically lot numbers: CC03, CC13, CD10, CD20, CD30, CD40, CD50, CD60, and CD70. Testing of this ammunition demonstrated key holing and yawing at distances of ten yards or greater, and inaccuracy to the point numerous complete misses (off the (U) Administrative Note: This product reflects the views of the Little Rock Field Office and has not been vetted by FBI Headquarters. UNCLASSIFIED UNCLASSIFIED

Try an army supply store. Greenes military in Donelson had some for around 8 dollars I think. I am sure someone would ship you one if you ask. You could pay them through pay-pal.

???? Me don't like!!!!!!!!!!! Don't need a bi-sexual gun!

There is nothing you can do right now except appeal it. When they do your back ground check now days they run you by your social and then by your name alone. Your name is probably listed on some idiots arrest report. It happens all the time. If the appeal is denied, you will be able to obtain more info and appeal it again. It will come out in the end. It is just a pain haveing to wait. It has happened to me before that is how I know!

If it has expired you will have to take the class all over again. If not then just call the dmv for your info on the hcp. You would have to go there in person to get a new one. If it is your armed license you are talking about the same applies except the department of commerce and insurance handles that. They could give you your license number over the phone. But again you would have to go there in person to get anything else. Armed license expire in 2 years and the hcp expires in 4 years. Hope this helps.

Pm me for instuctions on how to lighten the trigger pull. There are a couple of things you can do. I have done several and have owned one myself. The trigger pull is around 10 to 11 pounds. I can tell you how to bring it down to about 6 pounds. Then if you will take the extra time it can be brought down to about 5 and be very smooth. Most mods to this gun can all be reversed.

Has anybody used magnum primers in 9mm or 40. I was told to reduce the load by 10% and it would be fine. Anybody have any suggestions. I am very new to reloading so any advice will help.

Look at the guns shows. At the smyrna show they had one for 19.99 that would hold 2 kids. LOL.