Search the Community
Showing results for tags 'ad closed' in content posted in Non Firearm Classifieds.
-
Sold
-
And the clearing out continues. Putting both of these under one thread to try and not spam the forum too much. New Precision Mathews 1440GT Lathe with LCD DRO. Long story short, I had another PM lathe and had some issues so they offered to let me upgrade to this one made in Taiwan. I had to wait a year to get it and if you order now, there is still about a year wait. These are highly regarded lathes. Mine has what is called the Jacobs conversion which is just the VFD setup that allows this 3 phase machine to run on single phase, but Mark (Jacobs) builds in options for variable speed, proximity stop (very nice when threading to a shoulder), two speed breaking, and some other nice functions. If someone is really interested, I can provide all of the info and details. For TGO I am going to include 3 8" chucks (a 3 jaw, 4 jaw, and TMX 3 jaw Set-Tru). These are a lot of money in and of themselves. I have an Aloris type BXA quick change toolpost with a lot of holders for an additional price if the buyer would be interested. TGO price is $xxx with the chucks. To buy this now for the same setup would be $xxxx. This is not a cheap lathe, but is about the best value out there for the quality. This has a 5 year warranty. 2nd is a Jet JTM-4VS mill. This is basically a Bridgeport clone. It is also 3 phase, but running on a VFD with push button controls. It is variable speed via either the head or the VFD. Has a pneumatic drawbar, and powerfeeds on X and Y. It will include a Touch DRO controller that uses an Android Tablet as the DRO. When I bought it, it had optical scales on the X and Y which are still on and work with the TouchDRO. I bought 3 new Magnetic scales so I could add one to the Z and replace the X/Y, but I hadn't got around to it yet. They will be included. I will also include the 6" Kurt vice which has soft jaws on it right now, but I also have the original hard jaws. Could be repainted in spots, but other than that it is in good working condition. Price is $xxx for TGO'rs. Both of these machines are hooked up and can be run. I can load them on your trailer with my tractor. Any questions, just let me now.
-
Next item on the block is my Polaris Ranger. About as clean and in as good of shape as you will find. Details are: Only 750 miles, Giloman Tune and Clutch kit which gives it 100HP like the RZR and General. Makes a big difference, especially on the road. Road ready with turn signals, horn, etc. Polaris half doors, Polaris Tip-Out Glass Windshield, Polaris Glass rear sliding window, Polaris bed mat, Trail Armor UHMW A-Arm protectors and full machine skid plate, Black Oak LED Cubes front and rear, Rear Bumper, 6000lb winch with synthetic rope and remote control. Only been used on my land. Never on trails, mudding, or abused in any way. Price is $Sold.
-
For sale is a ZT 0561 Hinderer Dark Earth G10, 3.75" Elmax stonewash blade. I am the original owner. Knife is in exceptional shape, never carried, nothing cut other than a piece of paper, original sharp factory edge. Includes very cool (to me anyway), Skull lanyard, box and include manual. Actions is very smooth, zero blade play, solid lockup and blade looks to be perfectly centered. Asking $275 FTF in the Mount Juliet area or $285 shipped. Additional pics and video ps://imgur.com/a/futdb6Hhtt
-
Just finished, nice hunting knife 4 1/2" blade, 9" overall length. Hollow ground blade is 5/32" thick made out of Sandvik 12c27 stainless.Hardened and cryo tempered to 59-60Rc its sharp and should hold a keen edge. Its a good shape for general game prep, camp chores. Handle is Tennessee Black walnut. Comes with a nice handmade leather sheath. Price: $160 shipped Thanks for looking.
-
As mentioned in my other ad, I am selling out and moving to the lake so almost everything is going. I bought this last year to do some more off road riding. Rode it around the farm some, but hasn't been used much. Less than 500 miles on it (maybe even 400). I have at least a couple of extra oil filters for it. Oil has been changed once already. Has skid plate, larger pegs, and rear carrier. Price is $xxx. Title in hand. I have a really nice VersaHaul Hitch carrier available as well to the buyer first. I have the light kit for it which will be included, but I didn't install it yet. $xx extra for the hitch carrier.
-
Celebrate the Tennessee Knife Freedom law with this NIB TGO Protech Les George Rockeye. This knife has never been carried, used or sharpened. Original, very sharp, factory fresh edge. It's been in my safe since purchased. #3 of 60. Specifications Overall Length:8.375" Blade Length:3.375" Cutting Edge:3.25" Blade Thickness:0.13" Blade Material:154CM Blade Style:Drop Point Blade Grind:Flat Finish:Black Edge Type:Plain Handle Length:5.00" Handle Thickness:0.50" Handle Material:Aluminum Weight:4.74 oz. $235 FTF in the Mount Juliet area. Will ship for USPS flat rate cost.
-
-
I have replaced my water line from the meter to the house. The plumbers didn’t do any landscaping after the job was done. I need someone to smooth it all out, seed it and cover with straw.
-
Like new Buck Strider folding knife. Great EDC folder that is no longer made. It has never been carried and I don’t think it has even been used to cut paper. it has been buried in a bug out bag for last ten years or so and never used. $90.00 Nashville area
-
Found one! Thanks. Looking for a good used engine stand. I got a notion to pull the engine from my 240Z and now I need a stand. It'll have to be pretty close to me, I guess, say west Knoxville to Cookeville. Please let me know what you have and what price you need for it. Gracias!
-
ad closed SOLD!!! Pro-tech 2242 strider SnG $200
zweibelkopf posted a topic in Non Firearm Classifieds
-
-
ad closed Ad closed. Microtech DOA Killswitch $450
zweibelkopf posted a topic in Non Firearm Classifieds
-
Beater gear, drag it anywhere. Sure you like playing that American strat and deluxe reverb, but do you want to drag it outside, to the clubhouse, drag it around in 95 degree 80 percent humidity, leave it in your car for days on end cause its just too much trouble to carry inside- no. This is a perfect combo to play anywhere without a care... 50.00
-
Benchmade Nimravus Elishewitz ATS-34 Knife Knife has factory edge. Never sharpened and not sure if ever used for cutting. Did carry for about a year on a tactical set-up and the blade finish does have wear spots from movement in the sheath. I have the original sheath but it does not have the belt loop. It needs a new sheath. $50.00 Nashville area
-
Great display sword, probably functional to if you go to battle samurai ninja any time soon. Just sits here, would rather it sit somewhere else. 40.00
-
I no longer need my cargo trailer as I'm very tired of moving! I also prefer riding my motorcycle rather than trailering. The trailer is in great shape. Has tie downs along both walls. Also has a motorcycle chock which is easily removed. Purchased new in 2018. SOLD
-
This is a home made cannon, I used it for display purposes only and its a great conversation piece. I would not recommend anyone fire the cannon. Its about 2 feet tall for size reference. It was built by an ex 101st soldier and I have had it for a few years. $125.00
-
ad closed No Second Place Winner- Bill Jordan book
221 Fireball posted a topic in Non Firearm Classifieds
Hard cover issue, 1994 printing, no yellowing of pages, or tears, excellent condition. Classic book written by legendary lawman Bill Jordan, who passed in 1997. He was the one who influenced S&W to produce the Model 19 and 66. I saw Jordan at Bianchi Cup 1987. Didn't meet him as he was surrounded by his entourage, but cool I was standing 15' from fame. Internet shows crazy prices of $100 plus for hard cover copies, I'll take $40 FTF SOLD