Search the Community

Smith & Wesson K22 $900. .22LR Based on my search this was Mfg in 1948. Includes Speed Beez Speedloader and case. I am located near Knoxville.

Beretta 9mm Compact, 15-round mag (only one) for sale. Lots of shallow scratches on both sides of slide, otherwise excellent condition. Double/single action, ambi slide stops and hammer-drop safeties. It has a steel slide and hi-cap mag, so it's a bit heavy for concealed carry in my opinion, but it would make a tidy package for household defense or as a car gun. $350 no trades. FTF in Murfreesboro.

I've got a CMP rebuild M1 Garand. It has a Criterion Bbl. new Stock with the Proper Marks marks put on by CMP. The Park. Finish was also done by CMP and they did a great job on it. Everything else is marked SA USGI Bolt, Reciever, OP Rod, and Trigger Assembly all marked SA. also I have a box of End Clips that will go with it, the Sling is not included (I had it special made) I bought this off of an older gentleman, the Box and Paperwork he couldn't find. I'm asking $1700 CASH. I live in the Whitehouse area but can meet anywhere around here, Goodlettsville, Hendersonville,Gallatin, Nashville area. Can drive a little to make the deal. I'm selling this to fund another purchase. First to post I'LL TAKE IT followed by a PM gets it. Please PM me any questions you might have and I'll try to answer them the best I can. Thanks for looking.

I purchased new about 4 years ago. Doesn't get shot, only a couple hundred rounds through it since owning, just clearing some space in the safe. Comes with 2 mags. $1400.

I'm located in Old Hickory between Hermitage and Madison. Asking 900.00 but will consider a reasonable offer. there are 5 32 round mag, a scope and a bipod.

Sold

This is a Browning A-Bolt, Alaskan Special, stainless with ported barrel and polymer stock. It comes with a DNZ scope mount and a Nikon ProStaff 3-9 x 40 scope. It also comes with a soft rifle case. $1000.00 obo. Feel free to contact me. Nine.0.one - 4.nine.0 - 7. five.8.seven. Or reply to this ad.

SOLD Started this cool build about the same time I picked up a Wilson Combat upper and lower and finished that one first and really don't need two AR platforms so.... Here is your chance to pick up a solid start to an AR with ability to finish out caliber and accessories of your choice. So here you have it SilencerCo bare upper SilencerCo lower built with, CMMG parts kit, CMC 3.5# flat face trigger Palmetto buffer tube and spring, and Magpul grip and stock. (Total in parts with no tax - $700) Lower was attached to the WC upper for one mag to function test, zero issue. Feel free to PM with questions. $550

Sold.

This gun was built in 2020 from brand new parts. It shoots like a dream. It is very accurate. It was just my spare AR. I probably put 100 rounds through it max. Excellent condition $900.00 PICTURES HERE Parts as follows: - Palmetto State Arms lower - ALG Trigger - Toolcraft 5.56 NATO Black Nitride Bolt Carrier Group - 158-Carpenter-Steel-Bolt - BKF M4 MOD-0 16? Govt 5.56 Nato Mid length 1/7 Twist Barrel W/ 13.5" FFSSR Handguard (BKF W/ Pinned Gas Block) - Railscales HTP® Scales - M-LOK - Arisaka finger stop m-lok - Magpie CRT Stock - Larue Grip Upper Specs: BKF M4 MOD-0 Assembled Upper Features: M4 Feedramps 7075-T6 aluminum .250 takedown pin holes Laser engraved T-marks Dry Film Lubed Upper Type 3 Hard Coat Anodizing Made in the USA Forward assist and dust cover installed Parallax Tactical 13.5? Slim FFSSR M-LOK Super Slim Profile (1.360?) inside diameter Simple Lightweight design (8oz) Free Floated QD Swivel mounting holes at the 3 and 9 oclock positions at front and rear Picatinny rails at the 3, 6 and 9 oclock positions M-LOK Compatible Made in the USA!!! BKF AR15 16? 5.56 Govt Profile Mid Length 4150 CMV 1/7 Twist Barrel W/ Pinned Gas Block Features: This BKF 5.56 chambered 16 inch Government Profile Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension. This barrel includes a QPQ .750 Low-Pro gas block drilled for a 1/8? pin which is included. This pinning insures that your gas block never comes loose once installed. **** I will remove the rugged, suppressors brake and include a standard B Cage Flash Suppressor. You will have to provide the crush washers and install.***

-No issues, roughly 100 rounds shot through it. -Comes with 80 rounds of .22LR, semi-soft HG carrying case and 1 magazine. Asking $400.00 Located in Oak Ridge

Clearing up space and freeing up cash for an upcoming major purchase. For sale are the following items. FTF in the Clarksville or Nashville area. Keltec RDB. $725 firm. Will include 1 magazine. Can negotiate to include Burris ar 332 Keltec CMR 30. $425 Includes 1 magazine. Can negotiate for including sige Romeo 5 sight Keltec sub 2000 9mm, glock pattern magazine. SOLD Glock 19 gen 4. SOLD Smith and Wesson M&P. $400. Includes 2 magazines. Has apex trigger installed. I will try to get photos uploaded later today.

This gun will also come with a youth model stock and a couple additional butt pads. It shoots 2 3/4 and 3 inch shells. Thanks for looking!

New sig 226 zev for trade or sale. Got to many builds going on and i dont shoot it. $1650 Located near Nashville.

-AR-10 .308 -No issues, no physical damage outside of a few minor surface scratches. -Had about 200 rounds through it, shot a deer with it last year from just over 200 meters. -Upgraded Quadrail. -Angled Grip. -UTG Red/Green dot optic. -(1) 25 round mag, (2) 20 round mags, (1) 5 round hunting legal mag. -70 Rounds on ammunition. Asking $750, no trades. Located in Oak Ridge.

28” and 3.5”. Bought brand new a while back and I’m just not gonna use it as it should be used. It has less than a box of shells through it. Comes with everything from factory. I can text pictures if you PM me. $2000

Aguirre y Arazabal (AyA) No. 2 Sidelock 28 Ga S/S Shotgun (New in Box). 28” Barrels (F & M). MSRP is $8,183, 100% Blue Book of Gun Values is $6,950. Absolutely beautiful wood, case coloring and engraving. FOR SALE for $6,200.

A BRAND NEW CMMG 5.7x28mm resolute upper mounted on a Sharps bros lower. This is the Overthrow lower with custom cerakote. Never fired either, FDE furniture. 1/2×28 muzzle brake. Add sig 938 w/factory case two mags for 500. 1800 without pistol 2300 with. Has a BCM enhanced lpk in it. A beauty! Comes with two un opened 32 round mags. Gallatin area.

Barely used g17 g4. I think I just fired one mag after I had the night sights put on. Includes 3 factory Glock mags and OEM box. $550 FTF Memphis with HCP. Able to meet buyer in Jackson TN

Never fired MK18 upper. Has a Daniel Defense BCG and a BCM ambi charging handle. This is just the upper. The lower in the photo is not coming with it.

I have a larger collection of older guns I am looking to scale down a bit. Mainly interested in selling but open to trades: Here are a few of the pistols I have available: .32 Forehand Arms Top Break - Pat Dec 1886 .32 Hopkins Allen XL Double Action, Octagon Barrel Victor 38s Imperial Metal .22 Must be able to meet in person. Located in Franklin, TN. I will post the rifles in another post.

For consideration is a Mossberg 500 pistol grip corncob forend Gun is used works as it should. Some one put a hole in forend I guess for a sling otherwise normal wear shoots up to a 3 inch. Barrel 18 and a half would make a good truck gun or house defense meet in Loudon West Knoxville area FTF 240.00

Ruger Precision Rifle in .338 Lapua with 2 magazines and everything it came with, including the box and (9) rounds of Berger and (11) rounds of Hornady MATCH - $1,850. If you want the rifle, Vortex Viper PST Gen II 5-25x50 FFP (EBR-7C reticle), Vortex rings, ammo and Atlas V8 B10 bipod - $2,850 It’s only had 19 rounds put through it, which is what is missing out of the 2 boxes of ammo.

Looking to sell a few pistols to help fund something else I’m wanting to buy. Sig 320 2 mags, g19 gen 5 factory night sights. I’m asking $600ea. Located in Athens

Very good condition, took it in on a trade and just do not shoot it. Looks very close to new. $500.00