Search the Community

I have a BCM Recce 16 for sale. It has an upgraded Geissele trigger on it. Bought brand new from Primary Arms in February of 2022. Less than 200 rds through it.

CZ P07 modified by Cajun Gun Works. Comes with one 15 round magazine and one 17 round. Burnt bronze cerakote, suppressor height night sights, extended mag release, Cajun Gun Works hammer and trigger, stipple job. Wanting to trade for a Glock 19, 19x, 45 or 17. But I’m open to other options. Send me what you got! feel free to drop your trades at 615-605-9918

Located in Murfreesboro, local to me pickup. No trades. Must be 21 and willing to flash Tennessee ID. I also no longer respond to “PM Please” requests- established members or benefactors only, please. FN Five Seven 5.7 pistol. Gen 5, MKII (most recent version). Trigger breaks just shy of 3.5 lbs and it is incredibly consistent. Shoots absurdly flat, virtually no recoil. Round count is under 500 (like most of my guns), purchased in 2018. I haven’t shot it in a while and it deserves a better home. It was sent off to Elite Ammunition for their $450 accurizing package and $250 MKII red front, green rear fiber optic sights. Elite Ammunition takes 16-20 weeks to do this kind of work. Accurizing package includes: Removal of magazine safety Smoothing of the hammer to sear contact. Greatly improves trigger action and creates a crisp release Reducing trigger pull by 50% Increase hammer spring pre-load 20-30% for crisper disconnect Chamber lapping. Aids in extraction and protection of coating on brass Polish and Tune extractor Polishing and Fitting (too much to list) and a detailed cleaning including correct lubrication Each gun is tested to deliver at a maximum of 3 1/2-pound trigger pull before leaving the shop. At the time, they were also including a 3 pack of extra power mag springs that normally sell for $35. Those are included. I didn’t particularly care for the Elite trigger shoe. It was slippery and too short for that trigger guard, IMHO. I swapped it out for one made by Eden Perfection and it’s perfect now. It really is a ridiculously good trigger. The slide shell is made of polymer and there are some minor dings on the top of the slide. Comes with holster. G-Code mounting system, made for use with Streamlight TLR-1 light. I have an extra, old TLR-1 (no S) I will include for you to use the holster. I don’t have the factory sights. I do have the factory trigger shoe. Gun, box, papers, holster, TLR-1 light, 3 mags with Elite Ammo springs (and factory springs). Adding 5 more mags (with springs) to package for a total of 8 mags. $1400 firm

For sale is a gen 2 Galil Ace wearing an Aimpoint PRO. It has 100 rounds down pipe and looks as new…as it should. Also comes with light and 1 magazine $2000 for the 4 items $1575 for rifle only and 1 magazine

Okay…this is one of the last that I’ll be letting go of. For awhile at least. Scorpion Evo3 S1 with box. Comes with the following upgrades. All original equipment is included in purchase. VG6 Gamma muzzle brake Magpul grip Extended charging handle 11-32 round mags 2-20 round mags Protac Streamlight Rail mount 1 with strobe. Comes with pressure pad. Holosun HE510C-GR SB tactical folding brace -or- Zhukov(needs form1) Oh yeah…it also has a Franklin Binary bang bang in it. Closest thing I’ve fired to full auto. So fun. The best that I could find was a $2800 set up in Fayetteville. They has 2 larger mags, but I have more and mine is better(I’m meticulous with my cleaning) and the Holosun is way better! With that in mind, I’ll say we start at $2800. If you think I’m way off base, as always, you are free to go screw yourself. Jk. Shoot me a note letting me know if I am off and I’ll adjust after research. Approximately 500 rounds through this beaut. *****SOLD PENDING MEET*****

Here for sale a beauty. Gen 2, Holds 17 shots. I like the grip on it and how well it shoots. I got this on my 26 birthday, its hard to let go but unfortunately, times have changed. Thanks for viewing!! Any other questions just ask. Also have a Pk380 and a mossberg pistol grip 12g pump shotgun up for inquiries

No need to write much. As Is. $220 Firm.

Sig 365xl with Romeo Zero installed. Gun was purchased before the red dot so I have the cover plate and rear iron sight. Bought new last year for 739.00. Bought the Romeo Zero a month ago. Gun has about 250 rounds through it, and about 30 with the red dot. Also have Hawg IWB holster (won't work with red dot unless modified) and C&G owb combat style holster. Comes with box , (2) 12 round factory magazines, and manuals. Asking 775.00 and will consider trade for CZ, or AR15 lower. I am near Columbia and can meet as far up as Franklin.

Savage 110 LH in 35 Whelen (left handed gun) I bought it to elk hunt, never used it or fired it myself. It is a used gun. Gun looks good, some minor dents and handling marks. BSA 3x9 scope $500 Also have 100 - 35 Whelen unfired brass, 50 Barnes 200 gr. flat base bullets, 100 Hornady Interlock 200 gr. SP bullets, 100 Hornady Interlock180 gr. SPSSP bullets for 35 Whelen. $250 with rifle purchase. Meet near Whitleyville.

Comes with flared magwell adapter (polymer) and one Pmag 15rd flush magazine. Extended controls and a 1 degree spacer to gain elevation on the red dot. Suppressor height sights. I haven’t sighted in the red dot. Probably 200-250ish rounds through it. Only budget part is the trybe branded slide, which was still expensive and sourced just like other sales branded parts. The trigger bar, cross bar and comp are zev parts. Runs great but I have two other 9mms to eventually act as dedicated suppressor hosts. Only trades I’m really interested in are pcc’s, handguns in .45 acp, .45 colt, .44 mag etc, big bore rifles or a 7.62x39 bolt gun. No ar’s. Will do multi gun trade with my listings.

Glock 43. Ameriglo sights (illuminated front, black serrated rear) stippled frame, Overwatch Precision trigger, Two magazines w/ Hyve +2 extensions. $475 would be open to trade for a Glock 48, 43x, 19mos you can text at 615-605-9918

Spike's Tactical M4 flat top upper receiver, Machined from a 7075 T6 Mil-Spec Forging with Mil-Spec Type III Hard coat Anodized finish, T-markings, Spike’s logo and M4 feed ramps. Barrel is certified MIL-B-11595E CMV. Bolt & barrel are HPT/MPI tested, M4 barrel extension, Chrome chamber and bore, 5.56mm Nato chamber, 1:7 Twist, Magnetic particle testing on every barrel, Phosphate finish. Lightweight (Pencil) Profile with Mid-length gas system. Barrel is Phosphate finished under the .625 F marked A2 front sight base. The M16 carriers are Chrome lined with a Mil-Spec phosphate finish. Forged Mil-Spec carrier key, Chrome lined, attached with Grade 8 hardware and Properly staked. HP/MP Tested Bolt, Each extractor is fitted with a Mil-Spec black insert and Mil-Spec Viton o-ring. Magpul MOE heat shield lined black handguards. Pinned Spike's Tactical DyanComp Muzzle Break with a BCM charging handle. There has been approximately 120 rounds put through the upper.

SIG P220R in .45 ACP This P 220 had a new top end built for it and installed at SIG. Combat slide with forward cocking seriations, night sights, barrel, spring and guide, all slide internals and a new magazine. SIG also overhauled the frame with new springs, short reset trigger and grip screws. Top end round count is close to 150. Comes with 5 factory mags and SIG factory case. $750.

Rifle has Boyd's thumbhole stock and is in perfect condition. Nikon P-308 scope mounted on DNZ 1 piece scope mount. Comes with 14 rounds plus reloading dies, brass and bullets if required

Very nice New Vaquero in 357. Includes original case, extra set of grips and Ruger holster. $850

Bipod not included. ZEV forged upper and lower receivers precision machined from 7075-T6 aluminum for strength and light weight, finished in true black type III class 2 hard coat anodize. ZEV Wedge Lock hand guard provides a full length continuous top rail with M-LOK mounting system. The integrated anti-rotation pin ensures a consistently aligned and continuous top rail with the upper receiver. ZEV match grade 416R stainless steel 16” barrel with bronze PVD coating, chambered in .308 Winchester with a 1:10 twist and mid-length gas system. Capable of consistent sub-MOA accuracy with high quality factory ammunition. ZEV Muzzle Device. Low profile fixed gas block. H3 carbine buffer increases dwell time and reduces port pressure to ensure reliable extraction and a smooth recoil impulse. Mil-spec chrome lined BCG with a manganese phosphate finish for improved lubricity and corrosion resistance. Flat face AR Gold trigger from ATC features a 2.5lb pull with a short reset and clean break that is second to none. Ambidextrous operating controls for the safety selector, bolt release,and magazine release. Mil-spec buffer tube provides six buttstock adjustment positionsfor user customization and comfort. ZEV Slide Lock charging handle permits ambidextrous manipulationwith an extended and textured latch for superior grip and ergonomics. Mil-spec staked castle nut with Magpul ASAP QD endplate with integralambidextrous QD sling attachment point. Completed with Magpul furniture and one PMAG magazine. Bipod not included. Length 35" Weight 7.5 lbs Material 7075-T651 Forged Aluminum Finish True Black Class 2 Type 3 Hard Coat Anodize Tolerance

Here are four Glock handguns that I wish to sell as a package. I feel like this is a very fair price, considering the value of the 10mm alone. I purchased them all new within the last few years, and they’ve never been out of their boxes, except to inspect them at FFL. They are all registered to me; I’m the only owner. They come with whatever a new one comes with. The 34 and 35 are Gen 3, the 40 and 41 are Gen 4. I want to say the 40 and 41 come with an adjustable sight tool…look, everything they came with, you’ll get and they came with whatever Glock put in there. If you want to buy some extra mags, let me know. I own many Glocks and can/will accommodate you. If I’m forgetting anything please just post it, so I can answer for all to see. I live in Sevierville, but am not totally opposed to meeting my Nashville folks halfway, so long as someone on this site will vouch for you. They really are nice, and besides a little G42, my only remaining unfired Glocks. Anyone interested? Please, no trades on this set…I love to trade but, sadly, I am in the need of funds. I would probably do up to 10 mags per firearm, if desired. Oh, and ammo…we can talk ammo too if you need some. I have a nice variety of 10mm especially. EDIT: the G40 (10mm) is the MOS version which has a removable plate for optics. I will throw in the set of MOS adapter plates from Glock with it. Glock 40 MOS = 10mm Glock 41 = .45acp Glock 35 = .40 s&w Glock 34 = 9mm I have their birthdays from Glock and I’ve written it in on the photo with the specs from the Glock site, too. Please forgive me if I’ve left out important info, just make a post and I’ll gladly answer. This is my first “firearm for sale” that I’ve ever posted and I’m sure I’ve messed something up. Oh, I tried to obscure the serial numbers in the photos…I’ve seen others do this so I figure that’s what I should do also, I also labeled them in the photo so you could tell which was which….the 10mm model 40 being the only one clearly identifiable just from sight. I’m a meticulous record keeper so I’ll include all the purchase records to their new owner, should they sell. Please consider this set…I’ll try and piece them out if no one is interested in buying them all together, but I’d like to try this way first…and they’ll be less expensive this way certainly!

I bought two of these a few years back when everyone and their mother had them for sale. I picked this one up at Bud’s in Sevierville. I walked it and another one over to their range and performed a mag dump on each, just to see if I could sling some of the cosmoline off them, and to my surprise, it worked! Anyways, I’ve seen photos of people making these look really nice. It’s a functioning, well made Beretta handgun. Come with the one magazine but I have more that I would sell - they’re not the cheapest mags though. I know websites sell these for about $275-$300 plus shipping, taxes, FFL fees. but they tell you As/Is. This is cheaper PLUS I can confirm that it fires…anyone interested? I’m in Sevierville

3 magazines. The GLOCK G19 Gen5 9mm Semiautomatic Pistol is constructed with a 5.5-pound trigger, a polymer grip and a 4.02-inch barrel. This centerfire pistol is completed with fixed front and rear sights and topped with a matte finish. Features and Benefits Polymer grip Front serrations Double semiautomatic action with a 15-round capacity 4.02-inch barrel with a matte finish 5.5-pound trigger pull Fixed front sight and fixed rear sight Specifications Trigger pull (lb.): 5.5 Metal finish: Matte Action: Double Product weight: 25.06 ounces Manual Safety: No Barrel length (in.): 4.02 Handedness: Ambidextrous Grip: Polymer Product length (in.): 7.6 Front sight: Fixed Style: Pistol Magazine capacity: 15 Rear sight: Fixed Caliber: 9mm Rifle Ammo Type: Centerfire

GLOCK 19 GEN5 comes with 3 mags and a hard TC holster the G19 Gen5 MOS FS GLOCK enhances the desirability of the already near-perfect Gen5 model with the addition of the Modular Optic System (MOS). The slide is precision machined to provide a mounting system for popular optic sights. With multiple adapter plates, you can quickly and easily mount miniature electronic sights to the rear of the Gen5 GLOCK slide, which has front serrations for easier and quicker manipulations. All of the Gen5 qualities are present in this compact-size pistol: The latest GLOCK nDLC surface finish on the major metal components, unmatched in hardness and rust resistance; the high traction Gen5 frame texture, quickly reversible magazine catch, ambidextrous slide stop lever, the GLOCK Modular Backstrap System (MBS) for individual operator adjustability, the universally-acclaimed GLOCK Safe Action System and high visibility orange magazine followers. Includes three 15-round magazines.

Sold

This is a Beretta 92x performance. These come with an all steel frame, heavier brigadier slide, and the new extreme S trigger system. Comes with the gun, 2 15rd mags, extra grip module, and a very nice locking box. Knoxville area. $1200 Sold pending meet

Sold!

CZ 75 SP01 Custom Shop Accu Shadow RDS (91773) 9mm Optic Ready. I am asking $1575.00 for the gun. I have a total of 306 rounds through the gun and it is in the same condition as purchased. No Trades Please. I prefer payment in Cash, Cashiers Check, or USPS Money Order only please. Thanks for looking. Sold - Thanks TGO