Black Springfield XD-S 9mm (XDS-9) with all the goodies. 3 mags total and comes with Talon Grips. 3.3" Barrel
Less than 200 rounds through her. Some slight carry wear on slide release, mag release, and rear sight. Otherwise ~ Finish is in great condition. Rated at a solid 7 out of 10.
Asking Price: SOLD
Also avail, nice condition RCBS Piggyback II Progressive Press (this is a complete Rockchucker with Piggy top deck), with case activated powder drop linkage (upgraded) in 45 ACP, with dies and two added shell plates (44 mag, 223)
Also includes some of the wearing part replacements like the die plate bushing and bearing, the primer return spring, etc.
If you want extra parts (specifically for the Piggy system) Ill empty a tool box full of them for an extra $40. Been collecting and hoarding them.
Its complete with powder measure, tuned very well and used exclusively for 45 ACP (one load wonder) and its smooth.
$365 with dies
$325 no dies
I CAN ship, press must be partially disassembled and fits in a rather small box (Done it before). Easy to assemble again, only breaking down major pieces and the PIGGY comes off the top of the Rockchucker base press.
PICS AVAIL by email, PM me with an addy and Ill get them out.
Pics updated 3/17/18 in replies below, will add daily as time permits. There will be no question as to the integrity or status of a firearm based on the pictures shown.
You will find 3 mausers (1908 at bottom, 1895 toward top, the odd duck with receiver sight is the 33/40 sporter)
PM for pics, please send an email address for reply
In Memphis area (Germantown), prefer FTF Tenn HCP, DL, bill of sale.
Willing to ship to FFL, C&R or TN resident as the law permits (C&R ok to ship direct with proper ID)
In no particular order:
SOLD REM SPR310
Caveat: Several years ago, had a choke tube get stuck really really bad! Decided to buy the "bad ass choke tube tool" and back it out.
That worked but it was so impacted that it split the vent rib from barrel at muzzle and cracked the muzzle on one tube.
I went ahead and shortened the barrel by 2 inches (in clear margins, no stress applied to the new muzzles -now 26 inch cylinder/cylinder) and silver soldered the vent rib end closed (very professional) as was factory. Muzzle shortened by precision bandsaw and then squared +/- .0005 by hand, de-burred, bluing undamaged. You may not be able to detect aside from the muzzle face shine, the barrel was altered (and having no chokes!)
I have no use for the shotgun now, I have one that matters to me for hunting (an autoloader) and thats enough.
A GREAT OPPORTUNITY for a well broken in SPR in 12 ga, 3 inch with no chokes in O/U in excellent condition.
SOLD (you can always rethread it for new chokes of ANY brand you choose or jug choke it, or just shoot it as is, or shorten it further for a coach gun!!)
Mauser G33/40, Custom Hunting Rifle, 30-06, ultralight.
XX fancy Walnut, case hardened grip cap, ebony tip. Pencil thin ultralight barrel, receiver sights (Redfield), oil finish. This is NOT your common reworked Mauser 98, G33/40 alpine action is weight relieved by Hitler for mountain use and its the cat's meow SMALL RING 98 platform to build on. Colt style Royal Blue high polish finish! Of course the bore is pristine and the rifle has been shot little, its a true hunting rifle, not a range beater. The G33/40 is THE finest mauser custom action to build on.
It has ONE CAVEAT: Last owner (before me) cut the case hardened checkered traditional butt plate off and shortened the butt 2 inches for a lady to hunt with. So LOP is short, has a kick eze on it (the jelly type). I had plans to fit a chunk of ebony to it to re-extend the LOP and then fit and case a new steel plate to match the grip cap (still present) but Ive hung onto it an have too many projects and the single shots have gotten in the way.
The action is worth $750 alone.
Asking $850 as fitted, a fine beautiful rifle which has one cosmetic correction needed or a young man/woman/lady frame to hunt as it is.
1908 Brazilian Mauser 7x57, not all matching, dark but strong bore, will shoot very well, needs good bore scrub (and a full cleaning as its still got cosmo in the crannies), its unmolested, no scrubbing, no stain removal, no stock cleaning. Missing the rear sling loop, loop base is there, missing the metal ring itself.
Bolt mismatched but headspaces correct (arsenal work)
$350 C&R Rules apply
BRAZILIAN MAUSER PICS BELOW