Jump to content

.45 ACP Mosin Nagant conversion


Recommended Posts

21 minutes ago, No_0ne said:

If 7.62x54r doesn't make enough noise for you, buy one of the carbine models ...

Most Nagant aficionados only use Nagant when referring to the revolver. I' m not one but I have read this on other forums and my guess is he's referring to this or one of it's variants.

7.62X38mmR

N0000_small.jpg

 

But then I find this.

http://www.thefirearmblog.com/blog/2011/05/25/converting-a-mosin-nagant-to-45-70/

twins-tm-tfb.jpg

Edited by MP5_Rizzo
Link to comment

Rarely does the phrase "Lets take a gun the Russians made at wartime and make it better" cross anyone's lips. Or at least I think that way. 

From a totally amateur point of view:

1.The .45 APC bullet diameter is 0.451 in v. the 7.62x54R bullet diameter is 0.312 in. So you would have to bore out or replace the barrel. Replacing it would probably mean having a custom barrel made.

2. The .45 APC case length is 1.275 in v. the 7.62x54R whose case length is 3.038 in. So you would have to re-work the entire internal magazine somehow.

3. The .45 APC is a "rimless" straight case v. the 7.62x54R whose case is a "rimmed" bottlenecked. You would have to account for this in the new feeding and bolt catch/extraction mechanics.

So basically after all this, you are only left with a base receiver and (probably modified) stock. Better to just get a repro Thompson and be done with it.

And MP5_Rizzo, from my experience using just Mosin refers to the rifle. That is one crazy conversion you linked to.

Edited by Ronald_55
Link to comment
Just now, MP5_Rizzo said:

You are correct, just Mosin refers to rifle.  Mosin Nagant or just Nagant, pistol.  The Thread topic says Mosin Nagant.

Well I don't read titles..:wall:.. Actually I just read the body of the post and skimmed the title I guess. Trying to do too much at once and still keep up with TGO. lol

I have heard all manner of mixes of this from "lay people", but none from anyone who actually deals with these guns much.

Link to comment
3 minutes ago, Dolomite_supafly said:

Rhineland arms used to make a 45 ACP conversion for Mausers. It was cheap too, something like $200 for everything including the barrel.

Here you go, $160 and that includes the magazine well to accept 1911 magazines.

At first I thought you would really have to have run out of useless projects to do this but then I saw 450 Bushmaster.  That kind of made it interesting all of a sudden.

Link to comment
4 minutes ago, Dolomite_supafly said:

Rhineland arms used to make a 45 ACP conversion for Mausers. It was cheap too, something like $200 for everything including the barrel.

Here you go, $160 and that includes the magazine well to accept 1911 magazines.

http://www.troupsystems.com/mauser45kits.htm

Crap, I knew their was a reason I needed a Mauser...... Thanks D. S. Now I see the weekend on Gunbroker looking for a good deal on one... lol

Link to comment
11 minutes ago, MP5_Rizzo said:

You are correct, just Mosin refers to rifle.  Mosin Nagant or just Nagant, pistol.  The Thread topic says Mosin Nagant.

Nope, Mosin Nagant refers solely to the rifle as well.  The revolver is simply the Nagant ...

 

 

 

28 minutes ago, Ronald_55 said:

Rarely does the phrase "Lets take a gun the Russians made at wartime and make it better" cross anyone's lips. Or at least I think that way. 

 

It might be rare, but the Finns did just this ...

  • Like 3
Link to comment
2 minutes ago, Ronald_55 said:

Crap, I knew their was a reason I needed a Mauser...... Thanks D. S. Now I see the weekend on Gunbroker looking for a good deal on one... lol

I've got several $100 or less barreled action Mausers I picked up here and there and just haven't gotten my round tuit to do anything with but now this thread has my gears churning.

Link to comment
6 minutes ago, MP5_Rizzo said:

I've got several $100 or less barreled action Mausers I picked up here and there and just haven't gotten my round tuit to do anything with but now this thread has my gears churning.

Well you just might need to share one. LOL How much do you figure you could get them completed for without the kit?

Link to comment
7 minutes ago, Ronald_55 said:

Well you just might need to share one. LOL How much do you figure you could get them completed for without the kit?

I haven't put much thought or research into them recently so I have no idea.  I know one is originally chambered in 6.5 X 55 Swiss and 2 I'm not sure but I'm think 7mm Mauser.  I just found the 6.5 and it's stamped on the barrel. Still looking for the other two and that could take hours or days.

Link to comment
Just now, MP5_Rizzo said:

I haven't put much thought or research into them recently so I have no idea.  I know one is originally chambered in 6.5 X 55 Swiss and 2 I'm not sure but I'm think 7mm Mauser.  I just found the 6.5 and it's stamped on the barrel. Still looking for the other two and that could take hours or days.

Your organization system sounds a lot like mine.

I see a local guys selling a sporterized 7mm Spanish Mauser for $175. I see on the kit site that the Spanish ones require bolt modification, so it might be a one way conversion. i would prefer to be able to convert it back to the 7mm in the future is I wanted. 

@Dolomite_Supafly Have you ever done one of these?

Link to comment
2 hours ago, Ronald_55 said:

Rarely does the phrase "Lets take a gun the Russians made at wartime and make it better" cross anyone's lips. Or at least I think that way. 

From a totally amateur point of view:

1.The .45 APC bullet diameter is 0.451 in v. the 7.62x54R bullet diameter is 0.312 in. So you would have to bore out or replace the barrel. Replacing it would probably mean having a custom barrel made.

2. The .45 APC case length is 1.275 in v. the 7.62x54R whose case length is 3.038 in. So you would have to re-work the entire internal magazine somehow.

3. The .45 APC is a "rimless" straight case v. the 7.62x54R whose case is a "rimmed" bottlenecked. You would have to account for this in the new feeding and bolt catch/extraction mechanics.

So basically after all this, you are only left with a base receiver and (probably modified) stock. Better to just get a repro Thompson and be done with it.

And MP5_Rizzo, from my experience using just Mosin refers to the rifle. That is one crazy conversion you linked to.

1. As far as a barrel goes. Barrel blanks in .451 bore diameter are available.

2. I'm aware of the differences in cartridge length too. Several cartridges have been chambered in Mosins. Magazines have been reshaped and reworked too.  

3. The rim can be reworked too. Rimless cartridges have been used before. Bannerman used the .30-06. The extractor would have to be reworked.

4. Have you priced a repro Thompson?

 

Link to comment
1 minute ago, Quavodus said:

1. As far as a barrel goes. Barrel blanks in .451 bore diameter are available.

2. I'm aware of the differences in cartridge length too. Several cartridges have been chambered in Mosins. Magazines have been reshaped and reworked too.  

3. The rim can be reworked too. Rimless cartridges have been used before. Bannerman used the .30-06. The extractor would have to be reworked.

4. Have you priced a repro Thompson?

 

Like I said 1-3 was my amateur opinion. No warranty given. LOL

#4 Yes, but my Dad has a Volunteer Arms Thompson clone, so I got lucky. 

Link to comment
14 hours ago, Dolomite_supafly said:

Rhineland arms used to make a 45 ACP conversion for Mausers. It was cheap too, something like $200 for everything including the barrel.

Here you go, $160 and that includes the magazine well to accept 1911 magazines.

http://www.troupsystems.com/mauser45kits.htm

I'm in the slow process of integral supressor build with one of these kits on a Spanish Mauser. Will be epic upon completion.

stamps here, donor rifle & conversion kit. Just gotta build the supressor.

  • Like 1
Link to comment
  • 2 weeks later...
On 8/18/2017 at 11:36 AM, No_0ne said:

Nope, Mosin Nagant refers solely to the rifle as well.  The revolver is simply the Nagant ...

My understanding is that the revolver is simply the 'Nagant revolver' for a very good reason - Mosin had nothing to do with it.  Leon Nagant alone was responsible for designing the revolver.

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

TRADING POST NOTICE

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions.

TGO makes no claims, guarantees or assurances regarding any such transactions.

THE FINE PRINT

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

TNGunOwners.com (TGO) is not a lobbying organization and has no affiliation with any lobbying organizations.  Beware of scammers using the Tennessee Gun Owners name, purporting to be Pro-2A lobbying organizations!

×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines
 
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.