Jump to content

Casting / Weight vs. Size


Recommended Posts

Here's the question. I cast 100 .452 RNFP (Lee Die) 255gr bullets. Because of the high antimony content the bullets averaged out at 222gr. What if any considerations should I take into account for the weight difference? My first thought is that I would stick with 255gr load data as the size of the round is the same thus limiting case capacity. I would assume that velocity would more then likely increase since weight is different, unless the bearing surface of the bullet actually has more of an effect then the overall weight. Anyways, let the speculation begin.

Round Details

Caliber: 460 Rowland

Powders: Accurate #7 / #5

Brass: Starline (New)

Primers: Winchester (LP)

 

Link to comment

I would use the data for the weight, since it's the same size, relatively, the weight would be the only difference. Velocity will be different, increase as you speculated, and pressure, probably less, since the bullet will move forward sooner. Bearing surface should start the same since it's the same mold, but hardness may be an issue since the bullet may not obturate as much, leading to less bearing surface.

  • Like 1
Link to comment

I am going to the range tomorrow. I will cook up 3 seperate batches with slowly increased charges. If possible I will take pictures of the bore. Not sure if I can get a good angle since the comp locks the barrel to the slide for the most part. I'll report back after in case anyone else is interested in the results.

Link to comment

Ok so went to the range today. Listed data I am using as my base for a new load is 12gr aac #7 with a cast SWC 250gr. I worked all my loads in batches of 5 and went up incrementally from 9.5 to 11.1.

No signs of over pressure

No lead fouling what so ever

Accuracy was amazing. 

I will continue to work this load up and then run it through the crony.

Resized_20180930_180412.jpeg

Resized_20180930_175752.jpeg

  • Like 2
Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

TRADING POST NOTICE

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions.

TGO makes no claims, guarantees or assurances regarding any such transactions.

THE FINE PRINT

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

TNGunOwners.com (TGO) is not a lobbying organization and has no affiliation with any lobbying organizations.  Beware of scammers using the Tennessee Gun Owners name, purporting to be Pro-2A lobbying organizations!

×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines
 
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.