Jump to content

22LR AR15 magazine question


Recommended Posts

I am sorely tempted by the PSA lightweight upper in the daily emails I receive. I've never owned one. I would like to know if the magazines are pretty well standard between dedicated uppers and 22LR conversion units. I'd also like to hear your preferences on brands and where you'd buy them.

Link to comment
Just now, MP5_Rizzo said:

They recommend Black Dog Machine magazines.  I have several Black Dog sonic weld mags that I use with and old Ciener/Atchisson  conversion kit and never had an issue.  Even in full bullet hose mode.

I second this. I used the same mix for a long time with no major issue.

  • Like 1
Link to comment

There is a company called Better Mag that makes a lower magazine well adapter that fits into the AR lower and converts it to use the S&W MP15-22 magazines that also works as a last round hold open.I have one for my dedicated CMMG upper and they work really well.A person just slides the adapter into the lower and install the upper assembly and away you go.

  • Like 1
Link to comment

I use Black Dog magazines in my PSA 22LR dedicated upper.
Normally I order direct from the maker.
In my experience thus far, It's easier to find them in stock that way.
The only "twitch" I have found with them is if you rest the rifle on the mag, like in the absence of a bipod, they don't like to feed the next round. Sometimes it will, sometimes it won't. (This might not be the fault of the mag itself.)

The upper really likes CCI Mini Mag HP's.
Really nice groups @ 50 yards.
I started out buying Mini Mag solid nose, then discovered that the HP's grouped better for me.
Mine is the classic M4 style, 16" with front sight and non free floated hand guard.

As for the SW MP 15-22 ...
I had one.
It was OK I reckon, but I grew not to like it mainly because the whole thing is plastic.
The bolt catch would "rock" back/forth in it's pocket. (Not good for longevity IMO)
The "buffer tube" and lower is a single, all plastic, piece.
I felt like that if I were to take a fall, and the rifle had to support my weight, it'd break.
They will take any milspec trigger group, and a milspec stock.
If you wanted to replace the hand guard, I read that it can be done, but good luck with that.
I wound up giving the rifle to my daughter so she'd always have at least one of "Daddy's guns". 
My wife still has a 15-22. We'll most likely replace it with another dedicated PSA upper.

Link to comment
11 hours ago, DL126 said:

I use Black Dog magazines in my PSA 22LR dedicated upper.
Normally I order direct from the maker.
In my experience thus far, It's easier to find them in stock that way.
The only "twitch" I have found with them is if you rest the rifle on the mag, like in the absence of a bipod, they don't like to feed the next round. Sometimes it will, sometimes it won't. (This might not be the fault of the mag itself.)

The upper really likes CCI Mini Mag HP's.
Really nice groups @ 50 yards.
I started out buying Mini Mag solid nose, then discovered that the HP's grouped better for me.
Mine is the classic M4 style, 16" with front sight and non free floated hand guard.

As for the SW MP 15-22 ...
I had one.
It was OK I reckon, but I grew not to like it mainly because the whole thing is plastic.
The bolt catch would "rock" back/forth in it's pocket. (Not good for longevity IMO)
The "buffer tube" and lower is a single, all plastic, piece.
I felt like that if I were to take a fall, and the rifle had to support my weight, it'd break.
They will take any milspec trigger group, and a milspec stock.
If you wanted to replace the hand guard, I read that it can be done, but good luck with that.
I wound up giving the rifle to my daughter so she'd always have at least one of "Daddy's guns". 
My wife still has a 15-22. We'll most likely replace it with another dedicated PSA upper.

Your completely right about all plastic.I am the armorer at Range USA and we have a S&W 15-22 in our rental inventory-I clean it every 2 weeks and it is holding up pretty well.

So far all I have replaced is an extractor hook and plunger with spring-A parson can replace the trigger group but the plastic lower pin holes get a little out of shape fairly easy.

Magazines are kind of a soft spot-the feed lips at the rear get a groove worn in and the rounds will self feed all over the floor-it would be a good idea to have one as a spare.

 

Link to comment
  • 4 weeks later...
  • 2 weeks later...
On 1/16/2019 at 7:17 AM, DL126 said:

As for the SW MP 15-22 ...
I had one.
It was OK I reckon, but I grew not to like it mainly because the whole thing is plastic.
The bolt catch would "rock" back/forth in it's pocket. (Not good for longevity IMO)
The "buffer tube" and lower is a single, all plastic, piece.
I felt like that if I were to take a fall, and the rifle had to support my weight, it'd break.
They will take any milspec trigger group, and a milspec stock.
If you wanted to replace the hand guard, I read that it can be done, but good luck with that.
I wound up giving the rifle to my daughter so she'd always have at least one of "Daddy's guns". 
My wife still has a 15-22. We'll most likely replace it with another dedicated PSA upper.

Sold the wife's 15-22 a couple of weeks ago, (with her blessing), and ordered this ...
https://palmettostatearmory.com/psa-16-22-lr-1-16-nitride-2a-armament-13-5-m-lok-upper-with-bcg-ch.html

So far, it has functioned without flaw, and consistently hits where you point it using CCI MiniMag 36gr HP.
Probably have +/- 200 rounds thru it.
Very pleased.

  • Like 1
Link to comment
  • 2 weeks later...

Update ...

Last weekend I did a bit of shooting/testing with the aforementioned PSA upper.
I shot 200 rounds of the ammo mentioned above.

That ammo has 1260 FPS listed right on the box.
15 rounds over the chronograph ... drop high and low ... average of the remaining 13 ... 1270 FPS.
The chrony was 13' out from the muzzle, so I added 10 FPS and plugged 1280 into ballistic software.

25 yard zero.
12oz soda at 172 yards.
12.4 MOA up .... 1st shot hit.

New scope/mount ordered.
I'm anxious to see what it can do at even longer range!

Still very pleased.

  • Like 1
Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

TRADING POST NOTICE

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions.

TGO makes no claims, guarantees or assurances regarding any such transactions.

THE FINE PRINT

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

TNGunOwners.com (TGO) is not a lobbying organization and has no affiliation with any lobbying organizations.  Beware of scammers using the Tennessee Gun Owners name, purporting to be Pro-2A lobbying organizations!

×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines
 
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.