Jump to content

Recommended Posts

So I picked up a PSA lower on the cheap because it has a bad area of anodizing and a slightly over drilled trigger guard mounting hole. 


I can sand or blast the buggered up part of the anodizing, and a screw mounted trigger guard fixes the other issue. 


I buddy of mine has the setup to do cerakoting (he has been doing parts on an FJ40 restoration). So my plan is to Cerakote the lower and strip an upper down to coat it and it’s parts to match. 

My initial thought is maybe using SIG dark gray (it’s actually a Cerakote color) to coat the upper, lower, trigger guard, forward assist, ejection cover, hand guard and buffer tube. Leaving the grip, stock, barrel, and other small parts (takedown pins, safety, trigger pins, mag release, etc) black.  I think the small amount of black bits would highlight the dark grey nicely.  

I’m curious on folks thoughts on this two tone idea. 

If I go down this road I will definitely post an after.  

Edited by Snaveba
Link to comment
  • Snaveba changed the title to Cerakoting an AR

I would actually leave the forward assist and ejection cover black along with the pins, stock, grips, and mag. Plenty of gray with the upper, lower, and handguard and a nice contrast to it to have a bit more of the black. 

This is Titanium Gray Cerakote but similar in idea/style to what you are talking about. 
It is one of my favorite color schemes. I also like leaving the small parts and furniture black on FDE guns as well. 




Link to comment

The factory gun (top two pictures) has a black anodized receiver extension (buffer tube), no cerakote. 
My weapon (last two pictures) has the ACE Skeleton Stock which is not adjustable and does not have an exposed receiver extension. It has a foam sleeve that goes over the tube in the middle section. It is just an anodized tube though, no cerakote under the foam sleeve. 

Link to comment
  • 1 month later...

So I came up with this on the first one. The color is Disruptive Grey (but with a bit more black added). The stock was sanded down and shot with graphite black, as was the forward assist and ejection cover. 

then I built a 300BO and did the reverse of the mix. 70% graphite black with 30% tungsten. 


Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions. TGO makes no claims, guarantees or assurances regarding any such transactions.

  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.