Jump to content

Pf94dv2 p80 glock 17


Recommended Posts

Just got my 1st p80 and have a few questions. Are all gen 3 glock 17 parts interchangeable? Are 17 holsters compatible if not Are g17 w/light holsters compatible since retention comes from the light usually instead of the trigger guard? I'm sure I have more but that's enough to get started 😉20220506_191019.thumb.jpg.4ed64b37e3d264d987a5abd45ea07514.jpg.5cbc9ea09ce866d3dd805600911b39d0.jpg

Link to comment
  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Posted (edited)

Your internals and major G3 components are compatible. Things like grip plugs, flared mag well inserts and grip overlay textures are not compatible. There are P80 specific versions of those available from some sellers. There is some slightly difference geometry in the grip. 

Most holsters are fine or at least have more than enough adjustment in the retention adjustment screw (kydex type) to accommodate the P80 frames. 

I did one of the SC (26) P80 frames some time back and there was one spring that was not compatible with the off the shelf 19/17 kits but that was likely due to the subtle differences between 26 and 17/19 internals not P80 vs OEM Glock.  

Edited by OldIronFan
Link to comment

A polymer 80 Glock clone takes me about 15 to 20 minutes. The first one I did I took my time so it probably took closer to an hour. I work in the firearms industry as an engineer, I was a machinist for many years, and I play around as an amateur gunsmith on the side. I built dozens of AR platform weapons from billet, 20% forgings, 80% lowers, and stripped lowers before I did a polymer 80 build. The P80 stuff is dead simple and can be done with hand tools in a matter of minutes. 

Fret cutters or end cutters similar to the ones linked below really make the job easier. A rotary tool makes things easy as well. 
https://www.amazon.com/KNIPEX-68-01-160-Cutters/dp/B005EXO6TO/ref=asc_df_B005EXO6TO/?tag=hyprod-20&linkCode=df0&hvadid=312003160272&hvpos=&hvnetw=g&hvrand=16580136110054556434&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9013095&hvtargid=pla-454741761013&psc=1

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

THE FINE PRINT

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions. TGO makes no claims, guarantees or assurances regarding any such transactions.

×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines
 
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.