Jump to content
Kevincrossville

Complete Reloading Setup

Recommended Posts

Hey all, due to a new job and less time to spend I have decided to part with my reloading setup. It is currently packed away but if anyone wants pictures of anything please let me know. It is made of mostly Lee equipment featuring the Lee Classic Turret press. I have several sets of dies and extensive misc equipment. Hopefully I don't miss anything. If you have any questions don't hesitate to ask.

 

Lee Classic Turret Press w/ aftermarket shell ejector

 

RCBS .223/5.56 SB dies part# 11107 2 die set

Lee 9 mm die set w/ lee storage case and Lee 9 mm Factory Crimp die

Lee .40 3 die set w/ extra turret and storage case

extra Lee die storeage case

Lee safety primer feed

 

RCBS Uniflow powerder measure with auto linkage and pistol expanders

 

MISC:

Frankfort ammo boxes (.40 x1, .223 x1, .30/06 x2)

F-1 Shooting chrony w/ tripod

Hornady handbook of reloading

Harvey hand deprimer

Fowler Micrometer

Kobalt micrometer

Lee decapping die

Little crow .223 trimmer

Lee hand primer w/ shellholders

Imperial sizing die wax

Dillon case lube (2 new bottles)

Hornady stuck case remover

Lee 30-06 case length gauge w/ shellholder

Wilson case Gauge .223

Frankfort digital scale

Gemini-20 Scale

Lee .40 Bulge buster kit

Lyman hand bullet puller

Misc rifle brass prep hand tools

 

Brass:

30-06 Brass aprox. 90 rds

.40 brass 1k-1.5k

9mm brass 1k+

30-30 brass aprox 100 rds

.223 brass aprox 1.5k

Most brass has been cleeaned in SS Media.

 

Bullets:

Berrys bullets

9mm 124 Gr. aprox 195

9mm 147 Gr. aprox 291

.40 165 Gr. aprox 12

 

Magnus

9mm 124 gr FMJ

.40 180 Gr JHP

 

Hornady V-max .22 cal 55gr aprox 100

 

Powder & Primers

Ramshot tac opened but full LB

Hodgdon Longshot opened aprox 1/2 lb

Hodgdon Titegroup opened aprox 1/2 lb

 

Winchester SP Primers 1400

 

I'm sure i've forgot alot as it's all packed away from a recent move but I'll do my best to answer all questions. If anyone is interested just make me an offer.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Sigshooter1
      Sig 556r 7.62x39. Comes with 6 mags and ammo. It also has the upgraded Samson quad rail which was a $300 upgrade. Not really interested in trades. Located in Chattanooga TN. 


    • By TGO David
      FOR SALE:  Polymer 80 Serialized "Glock 19" 9mm with top-tier components.


      I built this handgun for myself this past summer to be an all-business fighting pistol. Took it to the range once and it has maybe 100 rounds through it.  Certainly no more.
      Great gun and really hits the sweet spot between Glock-enough that it uses industry-standard components and accessories (except holsters) and customized blaster with the tweaks most people pay a lot of extra money for after they buy a G19.  Things like stippling for more traction on the grip, and undercutting the trigger guard for higher purchase on the grip. 
      The P80 also has a slightly different grip angle that is closer to the 1911 angle that most folks prefer, a pronounced beaver-tail for recoil mitigation and to keep the shooter from being bit by the slide, a relieved magazine-release area so that it's easier to activate it without adjusting your grip, built-in "Accelerator Pedal" ledges on the side of the frame for pressing against with your support thumb for more recoil mitigation, and industry-standard 1913 Picatinny accessory rail.
      The big difference with this frame and a traditional P80 frame is that it is serialized and was completed by P80 rather than being milled at home.  This means tolerances were cut according to their spec rather than mine using a drill press or mill. 
       
      When I assembled the gun, I didn't skimp.  Here's what you are looking at:
      Polymer 80 FDE G19/23 sized serialized frame ($120) Brownells black Nitride finish stainless steel slide with front cocking serrations ($180) Glock OEM slide internal parts kit ($100) Glock OEM frame internal parts kit ($70) Agency Arms fluted black Nitride stainless steel match grade barrel ($200) Agency Arms gray flat trigger and Agency connector ($140) Dawson Precision "Charger" Sights with red fiber optic front sight and black rear sight ($65) Total assembled price: $875
       
      Will include two 15-round Glock 19 magazines ($40 value) and a Squared Away Customs right-hand Kydex IWB holster ($90 value) as well.
      Total value for the whole package: $1,005
       
      REDUCED SALE PRICE: $600 FIRM
      That is a $405 SAVINGS off of what you'd pay to reproduce this package. 
       
      Face to face, daylight transaction in a public place in Spring Hill / Franklin, TN area (Southern Williamson County) Cash only.  Not interested in any trades. Must show me your TN carry permit just to prove you're allowed to own a handgun
    • By TGO David
      🔥 FIRE SALE! GatorTrax MX Hard Aluminum Retractable Tonneau Cover for Chevy Colorado / GMC Canyon 🔥
       
      We just traded our 2018 Chevy Colorado to put my wife in something larger for our growing family and I removed this tonneau before doing so.  This is a top of the line GatorTrax MX Tonneau which retails for $1689.  It fits the Chevy Colorado as well as the GMC Canyon, both with the 5' 2" bed.
      It is a retractable design that rolls up into a canister at the head of the bed, locks at the tailgate, and is made of matte black hard aluminum.  I bought this to have the most secure storage possible in the truck for our cargo.  It functioned flawlessly and kept our cargo safe and dry in torrential downpours.
      Slides on maintenance-free sealed ball bearings Constructed of heavy-duty aluminul slats Works great with most 5th wheel hitches (you won't have one in a Colorado) Lockable with key in any position Supports up to 500lbs evenly distributed Three year warranty (only 1 year old) Made in the USA  
      I will help you install it in my driveway.  It takes about 15 minutes to do.
       
      Retails for $1689
      $1,000 FIRE SALE PRICE!!!
      Save nearly $700 off of the retail price.  I want this thing GONE.  I will be listing it on Craigslist next week at a higher price, but TGO gets first crack at it cheaper.  I'm making it worth your time and effort to drive to get it ASAP.  Cash price, no trades, no haggling.  This is as low as the price gets, period.
       




       
       
       

The Fine Print

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions. TGO makes no claims, guarantees or assurances regarding any such transactions.

×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines