rlowery78
-
Posts
8 -
Joined
-
Feedback
0%
Content Type
Forums
Events
Store
Articles
Posts posted by rlowery78
-
-
I was lucky enough to get to Walmart in east Knoxville this morning after work, and find I was the first of 3 asking about 22lr ammo. They had 3 cases of bulk... 1 box of remington 225 count and 2 boxes of Federal 500 count. with a 3 box limit, I am certain it is all gone. I think the federal boxes were just under 20 dollars. (Gun shops that have 22lr have been selling boxes of 50 for 4 - 8 bucks (nice raket they have eh... (8 x10 = $80 so a 60 dollar proffit for them WOW!) even at 4 dollars a box they double their money!
Anyway, I can finally shoot the dang MkIII.
-
Hmmm, looking back at that losd, it wasn't as light as I remember... 34 grains of 3031. I did shoot extremely tight groups at 100 yards with it. slthough they were not cast bullets (wish I had trued those) the 336 was an older one, pre microgroove. It had developed a headspace issues and went to live somewhere else.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
-
Was my thought also, would I devalue the pistol if it were restored?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
-
I did something similiar with my 336 but use Speer 100gr Plinkers (http://www.midwayusa.com/product/618190/speer-bullets-30-caliber-308-diameter-100-grain-plinker-round-nose-soft-point-box-of-100). I however do not load them as light as you all... (Can't remember my load data right now, but will look when I get home from work)
-
Thanks all!
Sent from my SAMSUNG-SGH-I337 using Tapatalk
-
" He had acquired the gun from a friends gun shop who had passed away suddenly and this was found in the shop in a brown paper bag."
My grandfather had a gun just like that one, this one may be it. My cousins took it when he died (2005) and sold it. Colt made some none working guns that looked just like the real thing but had a plugged barrel and a non working firing pin. The entire upper could be replaced making it a working firearm and that is what he did. My great uncle stole it from the Army, it wasn't as accountable as working firearms and gave it to my grandfather. He said the guns were used for training and sometimes ceremonies. I once found an article on them, I'll see if I can find it again.
Never mind, yours actually has a colt slide. The "US Government would have been stamped on the frame. Makes me think the frame may actually be from a different gun but with Colt grips.
I have to question why it is in a paper bag, if it were. Makes me wonder if he knew it was hot and this was a throw down gun.
A lot of scenarios, someone may have dropped it off to have work done.
And those are the same grips his had. Do me a favor and post a picture of the thumb safety, his had a different thumb safety from all the other ones I have ever seen in my life.
I'll try to do that...I obtained this pistol much earlier than 2005. It came ftom a state that required handgun registration and a permit to purchase... one of those "blue" states...
Anyway... it was speculated that it was imported instate but couldn't be registered due to its age and lack of information from the shop owner. ...since Tennessee is s touch more conservative I was gifted this pistol...
My father-in-law is a guy who thinks it neat to keep and shoot his firearms... I have been able to shoot some truely great firearms thanks to him. My favorite was a springfield 50-70 that was almost 120 years old. He loaded those cartridges with black powder and it was a joy to see abd shoot that old vet.
Back to my 1911... is there a reputable dealer in Knoxville that could help me get a better idea of what this guy is. Again not interested in s sale but an education.
Thank you all for the help...
Sent from my SAMSUNG-SGH-I337 using Tapatalk
-
1
-
-
If I run the serial number on Colt's website, I get a production year of 1959...However as you pointed out the frame isn't marked properly (from what I have read) to be a Colt... or am I mistaken? the "-" (dash) preceding the C is throwing me off a bit.
Thanks for the page link Steelharp!
I also have a "flat" and smooth main spring housing that came with the "brown bag" - Which makes it more convincing to me that this might be a "parts gun".
-
Not looking to sell or seek a price, but would like some information on this 1911 Colt, and some guidance as to what "should be" done with it.
First the story... This handgun was given to me as a gift from my father-in-law. He had acquired the gun from a friends gun shop who had passed away suddenly and this was found in the shop in a brown paper bag (I believe this is how the story went...)
Anyway, with no paperwork as required by the laws of his home state, and it was my birthday, I was given this 1911. It is in very rough shape, it does however function properly, and fire accurately...My best guess is it was produced between the 1940's and 1960's... based on the serial number, however it does not look like a proper colt serial number... 28XXXX-? (6 digits followed by a dash and an unrecognizable marking...a C or ?)
Also note the #4 on the trigger guard.
The slide on the right side is stamped, Colt's Pt. F. A. MFG. CO. Hartford Conn. U.S.A.
the left side markings and also note the "Y" on the trigger guard.
Beyond not knowing for sure what I have, I am also not sure how to proceed with this 1911. I would like to "restore" it or have it restored if that is the direction I should go. However, if this gun has been abused to the point of no return, should I just create a nice functioning 1911 to carry and enjoy? Refinish, barrel, trigger work etc...
Thanks for any help and or education you all may be able to provide me!
-
Hello all, new forum member located in Knoxville. Interested in surplus arms, reloading, varmint hunting and of course family/self defense...
Trying to play the Walmart .22 game
in Ammunition and Reloading
Posted
Yep...I am ashamed as I did the same thing...
Sent from my SAMSUNG-SGH-I337 using Tapatalk