Bumrush
-
Posts
9 -
Joined
-
Feedback
0%
Content Type
Forums
Events
Store
Articles
Posts posted by Bumrush
-
-
19 hours ago, swiley383 said:
Check your powder measure power pistol meters very well usually within a 10th of a grain. Make sure your adjustment knob is locked down good.
It is just a black plastic turn knob. How do you lock it down? Can improper adjustment of the fail safe bar cause this?
-
Ran some loads with the power pistol. Ran and shot great through glock 21. Went back and started running a large batch and my powder charge started changing. Got a few tenths high, then it started barely dumping powder at all. I have the old powder charger that has the plastic bar. Not sure what would cause this as I've never had that happen before?
-
What charge are you guys using on these powders?
-
I will give some of those a try.
-
I have several other powders to try. I was thinking there was something wrong with powder myself. I also wondered if I used too much case lube? Im gonna try a different powder. What do you guys suggest for 45acp? I have several other powders to try.
-
Winchester ball ammo "super target aa" I'm not sure about the charge as it's been a while since I fooled with it. However I set the charge about middle of the road on the load chart. Also I calibrated the bullet depth to near exact to spec.
-
Guys, I inherited an older Dillon 650 press when my brother passed away 3 years ago. Is there anyone around the Murfreesboro area that would be willing to help with this thing? I had it set up for 45acp but my rounds where weak and had unspent power. Also I need help with 223 as we have had feeding issues. I would be willing to pay someone that knows how to operate this thing to help me get started. I have so many supplies I hate to not use the thing. Thanks guys
Older Dillon 650 help
in Ammunition and Reloading
Posted
Yes there is a white bushing and a spring with a wing nut adjustment.