-
Posts
100 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Forums
Events
Store
Articles
Posts posted by mdlave
-
-
4 hours ago, RED333 said:
No more than a piece of flat bar, cut and file them harden. Do you have the original?
I don't, unfortunately. I'll probably start with a cheap similar firing pin and go from there.
-
9 hours ago, Grayfox54 said:
There's a store crossover reference in the back of the Blue Book. I find no reference to a Ranger 35. Does your rifle have an "A" after the model #. Ranger 35A? According to my book that would be a Stevens 66A. Does it have a Sears model number? Usually three digets a dot and then more digets. XXX.XXXX
It may take some time and searching, but I'm sure somebody probably has a firing pin for your rifle.
Nope, just 35. No other model numbers anywere. My research puts it in the mid 1930s, so it may predate the standard Sears model numbering scheme.
-
Hi all-
I have an old Sears Ranger 35 single shot rifle. They were made by several different manufacturers, but I've gotten mine narrowed down to a Savage 52B.
I need a firing pin, which looks like this:
https://www.gunpartscorp.com/products/1021150#
I can't find any on Ebay or other sites online.
I assume these older inexpensive guns don't have that much proprietary about them.
For the flat 22lr firing pins, how much does their thickness vary? If not too much, could another be ground down and shaped with a decent chance of success?
Like this? https://www.gunpartscorp.com/products/413700a
Alternatively, anyone recognize a similar firing pin that would work or maybe have one in their parts bin?
Thanks in advance!
-
-
-
Bump with price drop.
-
Updated price and package offer.
-
Bump with price drop and package offer.
-
-
-
-
Bump with price drop
-
They need a complete cleaning and rebuild. Heads are bare but come with all valves, springs, rockers to complete them. One broken bolt on each intake that will need to be extracted.
Thompson's Station
-
-
-
-
-
-
-
-
https://www.apextactical.com/duty-carry-action-enhancement-kit-for-the-m-p
This one fits 1st gen M&Ps only.
New. $45 or ship for $50.
Thompson's Station or vicinity.
-
This: https://www.freedommunitions.com/40-s-w-165-gr-rnfp-reman.html
12 boxes - 600rds - $120
In or around Thompson's Station.
-
-
Bump with price drop
Apex Duty/Carry Kit (100-073) for Smith and Wesson M&P 9mm, 40SW, 357Sig - $45
in Gear Classifieds
Posted
Bump