[What Upper is this?]

Best I can tell its an Aero.

[What have you made a TRADE with That wasn't GUN related?]

What trades have you made for GUNS/AMMO but you didn't use guns or ammo to trade with?

I just used a PC/Desktop Id made some mods to and traded for an AR15

[Great customer support]

3 hours ago, Sleep profit said:

Great to hear some companies still have customer service. 

Yes.  Thing was I didnt even ask. Twas his suggestion. I just wanted to buy a spring or know the size, 

 

[Great customer support]

These days we often see the bad in customer support for any given company. I thought Id share a quick GOOD experience I had.

I made a trade for an older AR15 build and it has a TROY Industries free float handguard. It uses a spring loaded pin and I lost the spring. 

I made contact with TROY and here is some of the email replies:

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------

So they are sending me a new part at no cost for a 2nd hand handguard thats years old.  

[What Upper is this?]

11 hours ago, bubbadavis said:

Based on the model number, it appears to be a 17 Design and Manufacturing

I was asking about the upper. I know what the lower is.  

[What Upper is this?]

12 hours ago, Nikiski Dave said:

I cant make it expand. I  cannot see that logo good enough.

There is no logo on the upper.

[What Upper is this?]

What upper is on this? I found no markings.  

[AR15 Free float Handguard 10.5-12 inch]

1 hour ago, scatman said:

MLok or Keymod

Either I guess. No need from me on a particular one. 

[AR15 Free float Handguard 10.5-12 inch]

Before I look over the net to see what I can find Ill ask here.  Anyone have a AR15 Free float Handguard 10.5-12 inch. Needs to be black. No quad rails. 

Thanks

[Who is here I know?]

3 hours ago, KahrMan said:

I think I bought your .458 Socom back in 2013.  Good to see you around again.

Thank you, Wow has it been 10 years??? 

[Who is here I know?]

11 hours ago, MacGyver said:

Good to see you on!

Was thinking of that suppressed Ruger 44 mag of yours just the other day.  

Thank you. Man I wish I had that back. 

[Swanson barrel AR15]

Anyone ever seen or know about a Swanson barrel for the AR15?

[Who is here I know?]

8 hours ago, ArmyBrat61 said:

Who can forget such a classic avatar? Welcome back neighbor!

LOL Thanks.  

[Who is here I know?]

2 hours ago, TripleGGG said:

Don't know you but welcome back! 

 

2 hours ago, FUJIMO said:

 

7 hours ago, A.J. Holst said:

Welcome back 

Thank you.  

[Who is here I know?]

1 hour ago, gary_boom said:

I think I bought or sold something from you in the Lowe’s parking lot in Kingsport years ago.

Yes we did.  

 

[Need a smaller auto for the wife]

Thanks everyone for the advice.  

 

[Need a smaller auto for the wife]

Message me if your in East TN and have something my wife can use .380 maybe 22 or 9mm. Will Not be used for carry. Open to suggestions. 

[Who is here I know?]

Its been a little bit since I used this group. Hello To everyone I know.  

[My old IVER JOHNSONS 22mag]

1 hour ago, Grayfox54 said:

I did a little research, it appears that you have a  55A Target Model.  However, the grips on yours seem to be correct. Are they broken? They look good from this side. 

Thanks for finding the info on it.

[My old IVER JOHNSONS 22mag]

1 hour ago, hughd said:

I wonder how many "Target Models" they made and if the grips were the same?

This look correct?

https://www.ebay.com/itm/Iver-Johnson-Target-model-55A-pistol-grip-black-plastic/132765190578?hash=item1ee96c09b2:g:3TMAAOSwSZBbiij5

 

https://www.gunpartscorp.com/gun-manufacturer/iver-johnson/revolvers-ij

Yes that Ebay one looks like it.......... Man I dont thik I paid much more than 39$ for it new...LOL

[My old IVER JOHNSONS 22mag]

1 hour ago, Grayfox54 said:

I did a little research, it appears that you have a  55A Target Model.  However, the grips on yours seem to be correct. Are they broken? They look good from this side. 

yes the bottom front is busted out plus a crack half way down one side.

[My old IVER JOHNSONS 22mag]

2 hours ago, hughd said:

Is there a "thumb rest" on the left grip panel?

Yes to thumb rest and its one grip not a pair.

[My old IVER JOHNSONS 22mag]

1 hour ago, pop pop said:

I have a Taurus K frame size 22 Mag pistol with a 3" brl 8 shot. It is SS and I really like it although the 22 Mag ammo is pricy to shoot it very much. I found using CCI ammo, and firing it 20' from a paper target, the 3" brl was not long enough to burn all the powder. I was getting unburned powder residue perforating my target. My son-in-law found some Speer 22 Mag ammo in the Short Barrell configuration and it fixed the problem of not burning all the powder in the short 3" brl. 

Yours looks to be a 4' or 5" brl. Just maybe your brl is long enough to burn all the powder. Just thought I would let you know  what a shorter brl has a tendency to do. If you are not burning all the powder one does not get the maximum performance out of the ammo load.

Thanks for that information.  

[My old IVER JOHNSONS 22mag]

47 minutes ago, Grayfox54 said:

Try some of the auction sites. Gunbroker or e-bay have quite a few listed. But you need to know the model name or number. You may have to be patient and wait, but these things do pop up from time to time. 

BTW: I like it! 

Hi and thanks for the help. No numbers on the gun cept the serial number.Ill keep looking thanks.

[My old IVER JOHNSONS 22mag]

1 hour ago, hughd said:

https://www.gunpartscorp.com/search#query=Iver Johnson revolver grips

Thanks but not there. ;