-
Posts
4,134 -
Joined
-
Last visited
-
Days Won
2 -
Feedback
100%
Content Type
Forums
Events
Store
Articles
Posts posted by DWARREN123
-
-
I do not like the Clinton's, either Bill or Hill. But then again I don't like most politicians
-
It's for attaching to your rifle!
-
The 25 meter/1,000 inch zero, at the time I zeroed, put you dead on again at 250 or 275 meters. Can't remember that far back.
-
WELCOME fivestring63
-
WELCOME RETCH, welcome to TGO.
-
WELCOME to TGO!
-
I just don't give a big frogs fa#t.
-
If I remember correctly it is about 3 1/2 feet high. Does not really matter except for the angle you fire because this determines how far the bullet will go after going through the target. It is really a 25 meter/1,000 inch distance from muzzle to target or use to be.
This is from qute a few years ago.
-
It's a heavy responsibility, carry with wisdom.
-
I also believe it has to do with how much money you have!
-
I like them and feel the same as most.
-
Use some common sense to keep yourself out of trouble. Make sure to document everything but don't go overboard and start shooting deputies. Also don't let them run over you.
-
:DCongrats and carry with pride and sense. Good for you!
-
I would carry as much ammo and grenades as possible for combat missions and tone it down for recons.
-
Depends on city, county, state and federal regs. The most restrictive apply.
-
Welcome to TGO.
-
I like the 40 S&W because it is a compromise. It is the only centerfire handgun round I use. The best of both worlds, size and speed.
The 40 is put down, in my opinion, because it came after the 10mm not before. If it had came before and people had used it I feel it would be reguarded the same as the 38spl to 357mag but since it came after everyone calls it a weakened round.
-
Maybe something like a GLOCK in 40 S&W and get the 357SIG barrel, just in case ammo is hard to find or it doesn't work out for you.
-
Thanks for reminding everyone a Have a Happy 10th Anniversary.
-
WELCOME from another newbie (old guy).
-
I use factory 40 in my G23. Recoil does not seem to bother me. I do carry IWB using a crossdraw posiion.
The GLOCK fits me well but I don't love it, it is my utility handgun.
-
Shooting, fishing and a little hunting, playing with computers and generally just goofing off.
-
Industrial maintenance in the Clarksville area.
-
I just like to pass stuff on that I do not use anymore.
.40S&W vs .45GAP
in Ammunition and Reloading
Posted
I do not believe the GAP is or will be a main stream caliber while the 40 S&W is possibly the best compromise caliber for pistols (semi auto) there is. The 40 has many loadings and platforms. The 40 is bigger than the 9mm but faster than the 45 ACP in standard loads. The 10mm takes a larger frame because of it's length and it causes problems for some folks.
I like the 40 S&W and have gone to it as my only centerfire handgun caliber.