Jump to content

KitePilot

New Member
  • Posts

    8
  • Joined

  • Last visited

  • Feedback

    0%

About KitePilot

Profile Information

  • Location
    Chattanooga, TN
  • Gender
    Male
  • Occupation
    Kite Flyer

Miscellaneous

  • Handgun Carry Permit
    Yes
  • Law Enforcement
    No
  • Military
    No
  • NRA
    No
  • Carry Weapon #1
    Springfield XDs-9
  • Carry Weapon #2
    Springfield XDm-9

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

KitePilot's Achievements

New Member

New Member (1/5)

3

Reputation

  1. It shows up just fine. Just realized that the link to my video was dead, so I updated it. You can see what the sight picture looks like in the video above.
  2. "Too hot" for the FBIs new (at the time) female agents, maybe... I like it just fine.[emoji1] I'm still hoping that Springfield puts out an XDm10. Sent from my SM-G930V using Tapatalk
  3. I do like the XS sights. I have the standard height Big Dot on one of my Glock 19s, and for short range shooting, it's fast. At speed, it's not as accurate as the Glock factory or bar/notch type sights, but it's accurate enough for short range defensive shooting. I'm going to have to get a PACT timer, and quantify that statement. Might make another video...
  4. Yeah, but $12.00 on Amazon with a 2-day wait for shipping, vs. $1.25 at Ace with instant gratification... Sent from my SM-G930V using Tapatalk
  5. I recently purchased a Glock 34 MOS, and put a Trijicon RMR on it. I did this because as I'm getting older, my eyes are getting worse, and I wanted to see if putting an optic on a handgun would make it easier for me to shoot quickly and accurately. I first tried a red dot optic way back in the 1990's. I put a Tasco Optima 2000 on an H&K USP 45. This mounted to the slide using the rear sight dovetail, so I effectively had no iron sights. This was only a minor problem during the day, when I could line up the pistol by looking flat across the slide, enabling me to find the red dot. But in dim light or darkness, when it was harder to see the outline of the pistol, I often found myself wiggling the gun in front of me, trying to glimpse the dot so I could line it up with a target. I ended up selling the Tasco on eBay, and going to iron night sights. Almost 20 years later, I've decided to try a pistol optic again. The deciding factors were, as previously mentioned, my older eyes, and Glock offering the MOS system on their latest pistols. I originally planned to go with a Glock 19 MOS, but then decided I'd give the Glock 34 MOS a try, instead. (The Glock 19 MOS is for sale in the Firearms Classified section.) The optic I selected was the Trijicon RMR RM05, a 9MOA green dot sight, illuminated both by a tritium vial, and by ambient light. This model does not require batteries, but the tritium will only be half as bright 12 years from now. I think, but I'm not sure, that Trijicon can replace the vial when it gets dim, but until then ,I shouldn't have to worry about it not working if I need it. When the RMR arrived, I tried to install it. I removed the smooth cover from my Glock 34's slide, and installed the appropriate MOS mounting plate. I then mounted the RMR, inserted the screws, and started to tighten them down. I did this very carefully, because I had noticed that they seemed a bit long...and they were. The screws that Trijicon includes with the RMR ***DO NOT FIT*** the Glock MOS mount. ***DO NOT*** try to force them, or you will destroy your Glock slide. Fortunately, I was able to purchase the proper sized screws at my local Ace Hardware store {6-32 3/8"), so I didn't have to order them and wait. By the way, if you go this route, pick up a bit of Loctite blue, to make sure the mounting screws do not come out. With the sight properly mounted, I went to the range to sight it in. This was an extremely easy process, and I had the dot zeroed in very quickly. Right away, I noticed a big improvement in my group sizes, consistently creating singular ragged holes in the bullseyes of my targets at 7 yards, and much smaller groups than I was used to making at 15 yards. (My hands aren't as steady as they used to be, either.) Although I liked the RMR a lot, I still had the same problem that I had with the Optima 2000 from years ago--without a way to visually index the pistol, finding the dot could be problematic. Even though the Glock MOS system features a slide cutout which seats the optic lower than usual, it still doesn't sit low enough to be able to use the factory sights. The optic's base covers the factory sight picture, making the factory sights absolutely useless while the optic is mounted. So I decided to pick up a set of suppressor sights, which are taller. I decided to go with the XS Systems Big Dot sights, with tritium front and rear. I chose these over the Trijicon brand because (1) The Trijicons were sold out, (2) The Trijicons were $50 more, and (3) Trijicon still makes the tritium lamps for XS. Also, (4), the big white dot on the front sight helps me to find it faster, and finding the front sight faster also helps me to find the green RMR dot faster. I am really quite happy with this setup. Yeah, the cost of the sights was almost as much as the gun itself. But I can shoot better and faster than I did before, so to me, it's worth it. If ever I need it, it will be more than worth it. But even if I don't, this setup makes target shooting a lot more fun. I'm hoping to take it to an outdoor range, soon, to see what I can do with it at even longer ranges. Here's a picture of it: https://www.dropbox.com/s/puqe5vcnmjmncj1/2016-06-26 09.33.27.jpg?dl=0 Also, another forum member asked me about "the washout effect." Basically, it happens when you're in a relatively low-light position, and you use the sight to aim at a brightly lit area. The light coming from the target area can overpower the reflected light of your aiming dot. Yeah, it's a thing. But if you've got suppressor sights, you can use them to aim through the optic, so I don't think it's that big a deal. If you use the battery-powered red dot sights, washout is probably less of a problem. I'm thinking of trying a Leupold DeltaPoint Pro, next. Here's a short video that I made, to show the washout effect in action. I also tried to get video of the dot in low light, but my camera didn't do too well at that, so there are some still pictures at the end that show the sight picture better. Full disclosure, the final pictures show the sights just a little bit brighter than they appear in real life, but in real life, the sight picture is much better than what is seen in the video. One last thing...It's not easy to take photographs and video of a sight picture, so I knocked up a mount for everything on my workbench today. It's pretty ratched, as the kids say, but it works. I did this for you, RT...you sure you don't want to buy my Glock 19, now? https://www.dropbox.com/s/1m6n0x674pabwlz/2016-07-02 21.04.45.jpg?dl=0
  6. 1mm too small... Sent from my SM-G930V using Tapatalk

TRADING POST NOTICE

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions.

TGO makes no claims, guarantees or assurances regarding any such transactions.

THE FINE PRINT

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

TNGunOwners.com (TGO) is not a lobbying organization and has no affiliation with any lobbying organizations.  Beware of scammers using the Tennessee Gun Owners name, purporting to be Pro-2A lobbying organizations!

×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines
 
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.