SHARPPOINT
-
Posts
172 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Forums
Events
Store
Articles
Posts posted by SHARPPOINT
-
-
Any of you use one of these http://www.stainlesstumblingmedia.com/stm-complete-package.html
If so give me your thoughts and maybe pics of the set up.. brass
Thanks
-
clear liquid
I already had to ask Dolomite_supafly
-
Thanks Caster
-
The MEC 600jr is a great reloader... I shot skeet yeeeeears ago. On the direction of my buddies Father we were ONLY to pick up low brass Winchester AA hulls. He had 50gal drums full... Every Winter my buddy and I would sit and load those with #9 shot and shoot them up in the Summer. Awww memories. I can't help you much except the "low brass Win AA. But learn how, You'll will enjoy it
-
1
-
-
I think??? That I ran across a post some time ago that gave a recipe for "homemade" case lube. Does anyone remember what it takes and how it is done? I use Dillon and just about to run out, thought I might give it a try.
Thanks
-
Good price?? $182.00 for 2000 115gr 9mm... 4000 would be $364.00
Montana Gold has 4000 115gr 9mm for $305.00
-
September 29th at TAC2 in Greeneville, TN
Starting at 9:00AM. If you can't make it by 9:00, come and jump in when you can..
-
JAB, if someone is shooting 500-1000 per year, I would say go buy the 9's. If you are shooting 15,000-20,000 per year... Do the math. I could not shoot as much as I do without reloading my 9's. JMHO
-
but to me 9mm is right on the cusp of worth the time
Brass off of the range = Free
115gr. Montana Gold = $.07
Federal Primer = $.03
4.4gr. of TiteGroup =$.01
$.11 x 50 = $5.50 per box vs. WalMart $11.97/50+Tax = $13.17 per 50
$13.17-$5.50 = A savings of $7.67 per 50 I shot IDPA Saturday and Steel Sunday = 500rd... Savings of $76.70 this weekend
Worth it to me! Caster, I know I could cut that down but I don't have the time... Right now, but someday
-
Where and how to lube a Dillon 550, maybe a pic or two. Also what to use a lube.
I also know that instructions are on the site but I'm a "show me"
Thanks for any help, TT
-
Caster, I was hoping someone would correct the math... One Million Two Hundred and Sixty Thousand bullets
-
Yes, sorry.. There was talk about starting at 9:00 because of temp. but too many out of town shooters.
-
TAC2 in Greeneville holds a Steel Challenge Encore Match on the 5th Saturday (if one) and June 30th is one of these dates... Starts at 10:00am but you can jump in whenever you can get there.
-
-
TAC2 - Tactical Advantage Concepts 2000 Greenville
USPSA - 1st Saturday of the month 10am
IDPA - 2nd Saturday of the month 10am
Steel Challege - 2nd Saturday of the month 1pm
3 Gun - 3rd Saturday of the month 10am
Other matches - refer to TAC 2 website for 'Special Matches'
Correction:
Steel Challenge is the 2nd SUNDAY at 1:00pm
at TAC2 in Greeneville.
-
kilo33, would you post some before and after pictures of your brass cleaned that way?
-
Thanks Dave, I called IDPA Office and she said that they need to work on the site for shipping small items... She is going to send some in an envelope. Thank you for your offer.
-
That is the lowest shipping, $14.78 or so. So no, but the more you order the price for each is cheaper.. If we look at it that way.
-
I know this is not the right place for this but it is the only place I can start an topic??
Soooo, does anyone have an IDPA patch or sticker I may buy? I was on the IDPA site and loaded 4 patches and 4 stickers for a total $12... and the shipping was $15???
Sorry again for posting here, maybe someone will move it.
Thanks
-
Just some info, I put the parts that Dillon sent.. Results=same, still hanging up. Someone told me to tape a unfired .45 to the top of the plastic rod (that pushes on the alarm)... After that I loaded 200rds without a problem.
-
Nope, it's the small tube with "blue tip". I called Dillon and they are sending out some new parts. Thanks for the help.
-
Sorry I don't know how to get the pic in the post..
-
Why my bench? anyway I will try to post.
What size should the tube be?
-
I have a Dillon 550, I load the primer feeder tube with 100 primers. I have 4-8 out of the 100 that will not feed. The one's that don't feed will be turned sideways at the bottom. I take a paper clip, knock it out then it will feed great again for another 10 or so and it will do it again?? I have changed the plastic bottom on the inside tube.. This happens with CCI, Win and Federal?? Please let me know what to try now?? Driving me crazy
S.S. Media
in Ammunition and Reloading
Posted
Thanks seawash. May I ask what the roller is?? Or what was it? What is the length of the pipe? 6" PVC? How many lbs of SS media do you add? Sorry for the question, but I have an old treadmill and think I might go your way.. I have a bunch of brass that needs cleaning and if I can do a 1000 at a time will be very helpful, might even get done before spring.
Thanks