Patton
-
Posts
3,825 -
Joined
-
Last visited
-
Days Won
4 -
Feedback
100%
Content Type
Forums
Events
Store
Articles
Posts posted by Patton
-
-
Yeah, that is a 5" M&P.
-
2
-
-
Just to help give you a ballpark figure, I paid $2500 for a metal roof on a home 1200sqft.
-
I as well say Northern Water snake.
Actually, copperheads love water. Of the dozen or so I have seen in my life all but maybe two were in or near the water.
-
1
-
-
The average gun shop only makes about $25 on each handgun so they normally are happy to take transfers.
-
The issue with Doubletap and certain ammo has to do with the primers being pierced by the firing pins. This leaves you unable to open the thing, but most of the time a couple of dry fires will release the firing pins. If not, I can easily pop the barrel off by pushing the takedown pin. I just had to find what ammo it likes and stick with them. I shoot mostly 124 gr HST +p in it. It's had probably a whole box of those without a single issue. It's not that the recoil is totally fierce; the shape just doesn't make it comfortable to shoot because it is the thickness of a dime. I do have a 45 Win mag derringer and full power loads exceed 44mag. It's just a different kind of recoil than the Doubletap.
I have always had a soft place in my heart for derringers of different types. My father always toted one of some sort.
-
1
-
-
4 hours ago, AmPaTerry said:
Another of my back-ups is a pocket carry double barreled derringer, which is even simpler. A SINGLE SHOT derringer would be simpler yet, and therefore even less likely to fail. A single shot derringer with no safety and a fixed firing pin on the hammer would be least likely to fail, but would add the risk of changing my singing voice to soprano, so is not in consideration as a pocket piece.
.My 9mm Doubletap has always went bang two times. It has some stout recoil and some cases like Hornady can be hard to eject.
-
1
-
-
47 minutes ago, AmPaTerry said:
A wheelgun, on the other hand, IF a round fails to fire, merely requires pulling the trigger again.
You better hope! I have only experienced maybe two revolver malfunctions. I had an ejector rod come unscrewed enough to cause it not to close. I have also experienced some crimp jump that caused the cylinder to bind. Both of these were easily fixed though.
-
1
-
-
I just skimmed through the responses. One, the first frost will kill the crabgrass; it is an annual. The Bermuda will continue to take over and once it gets thick enough I recommend Roundup at a slightly diluted rate over the fescue in the middle of winter about Janury 10th.
PM me and I will give you my phone number. It will be so much easier to talk.
-
1
-
-
23 hours ago, crossfire said:
S&W 386 SC/S
I have always wanted a Night Guard.
-
1
-
-
That notice is greatly appreciated.
-
40 minutes ago, xsubsailor said:
I like them in my SP101 but not overly fond of them out of the American Derringer (especially factory loads)
I don't think they are all that bad out of a derringer. Let me know if you want to try my 45 win mag American Derringer.
-
Something I forgot to add; the Pitbull is built on the larger Bulldog frame. In fact, it was originally a 6 shot 9mm but was redesigned to be a five shot to make it more reliable. It is not as large as a k frame Smith, but it isn't a j frame or a LCR size gun either. I don't know who makes a good ankle holster for it.
-
1
-
-
I have several, but this one is my favorite. Pre lock model 60
-
4
-
-
I am right handed and I have worn on the inside of my left ankle. Unless you are riding a motorcycle occasionally that is the way I recommend, but you would still use the right handed holster. I have also worn a left handed ankle holster, but much prefer the rh holster. I find a 30oz gun just too heavy. Something around 20oz is about the max. I did my 25oz loaded 640 for a day and thought it was possible, but not easy. All of this was with Galco ankle holsters.
I understand your logic with the 9mm and loading out of a magazine. I have heard the 9mm pit bull is not perfect and the two one of my gun shops have sold have went back to the manufacturer. Apparently, not extracting a case is what many experience. I think the ejectors are weak which leaves the extractor slipping over the rim and leaving a stuck case. They may have improved the design over the last year or two.
Unless you are law enforcement I think you have an almost un-calculatable chance of needing a backup, and needing to reload it from your primary.
-
1
-
-
I have owned two Sig 239's. It's a great gun and a great shooter. The downfall is the low capacity compared to guns similar in size. Know that many holsters that fit a Sig 239 in 9mm will not fit a 40 or 357. The slide is machined differently.
-
1
-
-
7 minutes ago, shotgunshooter said:
Hopefully it's a better finish. The finish on my shield blows as does one of my relations full size M&P.
Sent from my XT1585 using Tapatalk
It can't be any worse than that crap my newer Glocks have on them.
-
-
I was told about this through a friend that buys ammo for his department. It is hard to beat 180 HST.. https://massammo.com/federal-40-s-w-180gr.html
-
39 minutes ago, mikegideon said:
You have a typo. The 39 was a single stack 9mm
Correct, the 49 was the steel bodyguard.
-
Most revolvers will recoil more than a similarly size and weight semi auto in a comparable caliber. I have found only a few women that are ok with the snap of the 2" j frames. I have owned, or still do, just about every S&W revolver configuration. The all steel 36, 60, 640, 39, or similar are probably the best compromise for carry and shoot ability. Someone mentioned the 940 9mm and it is a heavy recoiling revolver and was discontinued partially because of malfunctions. They are also very pricey. The 32 family of S&W j frames can be pricey unless you find an older S&W 30 or 31, but then you give up a lot of energy. A rimfire revolver is a great option, but by nature they have a very stiff trigger.
-
1
-
-
29 minutes ago, gregintenn said:
Sure. I'm old enough to remember a Mayberry type police force in my small hometown, complete with officers who wore a tie instead of bdu's. You could actually have a conversation with these gentlemen, and knew them by name. People respected them because they earned it. This is a far cry from what one encounters on the street today. I see an us versus them mentality among today's officers that wasn't always present.
Believe me, I wish we still lived in those times. Today's street thug would kill Barney on his first tour. Yesterday's Mayberry is now Methberry or Pilltown. While my grandfather who was once a lawman liked Andy Griffith, he reminded me that the show and town was a fictional place. Today's cop may actually start out as the friendly kid next door but they quickly get seasoned by continuous assaults, lies, and trickery. It is estimated that only 10-20% of the people you make contact with are the good, productive members of society. Society started the us verses them mentality; it wasn't the cops. More than once I got assaulted by the "victim" in a case. More often than not people will tell you one story and then tell you a different story once a case goes to court. Even if you have a statement or a recording they will say they were coerced into stating one thing over another. I have had very nice contacts with people on the street only to get back and find a complaint had been filed against me. I am all for video and audio recordings even though they only tell a part of the story. You often find yourself in a damned if you don't and damned if you do situations, and domestic situations may be the worst.
I was always polite and always enjoyed talking to people. Believe me, I enjoyed talking to the normal people. You can quickly forget that there are good people in the world. I knew a lot of the citizens names in my town regardless of whether or not they had continuous calls for service or not. I never held a grudge once someone lied to me, and believe me, everyone lies to the police. I have had my own preacher lie to me before because I was wearing a badge.
-
3
-
-
Those are FMJ. They are what I was using in the woods for bear and cat defense. I didn't notice we were discussing hollow points.
-
The Remington UMC 10mm ammo is good stuff and not a lot of money. It is nickel cased too. I paid about $25 for a box of 50 and got several reloads out of the cases before I gave them to a friend.
-
When I had my 20 I planned on getting the 40 barrel too. In a pinch you can shoot the 40 out of the 10 barrel, but it is hard on the extractor and reliability suffers. I ultimately ended up reloading because of the 10mm which wasn't a bad thing.
-
2
-
Who has Keltec P32s in stock?
in Handguns
Posted
The pf9 was not a good pistol. I have had several p32's and loved every one of them. I don't know if I could justify spending more on a p32 than I could buy a LCP for, and LCP's are cheap now.