BLACKVANDRIVER

At the very last "pinned" subject of this forum. TGO David makes it very clear NOT to PM him or any of the moderators for help with support and to use this area. So, I will sit and wait for a reply. 

    Thanks Spots. 

Ok so I am a paid benefactor and would like to sell my engraved tags that I make at home. I am not a business just looking for my hobby to some what help pay for it self and was suggested that I would not be allowed to post them with out becoming a vendor. I do not need the banner (I don't have one) I would just like to offer TGO'ers my stuff as I have been asked by several to make them something.    So, if I am not a business why would I have to become a vendor and if I must then how might I do that? 

1992 ford e350 7.3 E4OD   Long story short. Supposed to have RABS test connect that is one wire you ground out and the dash ABS light will flash, you count flash to get code. Mine won't it stays lit. So was suggested to get HIGH end scanner to plug up to the round 2 pin port next to the EEC-IV port to get codes.  And of course that tech may have been wrong as he acted like the possibility of working on a 1992 did not seem like a thrilling adventure. 

I need to rent, barrow a scanner that will read Ford RABS code for ABS light. It has the ROUND 2 pin/wire housing diagnostic port and not the one black and orange wire that you ground out and count the flashing light.    Have abs light on that I believe is the guilty culprit affecting my shifting of my E4OD.    Can either rent it or leave deposit or pay you to come plug up and tell me what the code is. I am in Donelson. 

How you coming on this? If you need a digger I told you to just let me know. I will come over even with my finger in stitches! 

I briefly saw the OD like on the stalk light up but now there is no light on no matter if you push the button or not. Wont get to mess with it again until friday will report back. Thanks

I can also testify to Mr. Smiths amazing abilities! If you go to his website. Jerrysmithengraving.com you will see his work. Mine is the sugar skull 940 revolver! You would have gladly paid 3 times the amount for the quality of work he does!

Hard shift and after running 30-45 min seems like the TC doesn't lock up going down the road under load. Just replaced the Speed sensor as that sometimes gives bad signal to the brain. But my Rear ABS light is on and I know that will cause the trans to shift funny.  1992 E350 7.3 is what we are dealing with. 

Any one work, or own a transmission repair shop that specializes in E4oD's? Nashville area will be helpful!

Thanks for all the ideas and help. I will pass along to him. 

Have a customer a the bike shop that has a new Camp 45 rifle that I have not seen personally but he said he has owned it for years and has never shot it because out of the box he can not get the charging handle all the way back to chamber a round.   Anyone else every experience this with theres? My first guess is that there is some sort of shipping retainer on the bolt, Or that even though it will use 1911 mags that his for some reason do not work. But I do not understand why a mag would prevent that. I didn't think to ask if he tried to charge with with mag out.    Just thought I would try to help him out. Any help to me would be appreciated. 

Welcome to the board Mr. Blackbelt!

    I will re word my post then. Thanks

Looking for someone who reloads 458 socom rounds. Reason? Well, I have a handful(20) of bullets that I need loaded. I have no brass but can buy some on line and if someone has the die set up and can help me out?   if you can help me out please PM me.   Thanks!    Happy Turkey Day!

My sons laptop is in the same sinking ship! I switched to Mac in 2012 with a brand new machine and as of last week have been having major lock up and screen flickering. So the grass is not always greener on the other side of the fence! I hope someone helps you(us) out with a good recommendation for windows. 

Chris was a member on here a year or almost two ago. Many of you that attended the Nashville Fairground Gun Show might recall seeing him standing by the restroom area with the other peddlers in his pointy flashy cowboy boots almost every show. Although I did not know him personally I did talk to him a few times at the show about a few of his guns. Needless to say I was shocked and disturbed when I put 2 and 2 together and realized that I knew person responsible. I sure do feel sorry for the Waynes family having to deal with his pass but  especially so close to the holidays. 

DANG IT! WHERES HIPOWER WHEN I NEED HIM TO POST SOMETHING ABOVE! :devil:

It will be good to put a face with the name! Send me a PM if you want me to let you know when something comes in if your looking for a specific. 

Thank you and Keep the shiny side up! 

Hey Wayne sorry I will not get to see you again thru the gun shop but your more than welcome to come get ya a free burger on Saturdays when they cook out! Take care and ride safe!    Oh and we do sell Urals! So its based on a BMW! 

Any of you on here use Bumpus HD for your parts and service?   If you do, drop by the parts counter and say hi! You will have to ask for me by name so ask for Ryan from Vegas as there are a few Ryans that work there. I would like to meet more of the TGo'ers in that neck of the woods.   This week is my last week working at the Best Gun Shop in the metro area. Not an easy choice to leave there but family requirements take priority.    Last week was my first week at Bumpus and having been in the Motorcycle industry in some form or another most of my life (I will be 42 this year) I can honestly say that I am very impressed with there business ethics and customer service.    So with that said if you have had a negative experience or have one there please step up and say something to management. They can not fix the issue if they are not aware of it.    Looking forward to meeting other firearm enthusiast from here that also ride! I am not a brand snob. A motorcycle is a motorcycle!    

Maybe I should have worded it different.    Why can't members that have joined after Sandy hook(mostly) read the rules?

LOL Swim, I would not consider YOU as a newbie!