Can't find GM card

[Spiffy]

I've looked all over the box and under the foam and I can't find the GM card. Do I have to call and get them to send to me because I thought it came in the box!

 

[dlmeadows]

I told you, you have to blow Ben for that!

[Rickey]

Pretty!!!

[Jcoop]

It may be in the small end of the barrel! Oh and make sure the mag out before you look, just saying! I know how you are.

[Spiffy]

Nope I already cleaned the barrel......nothing in there now it's shiney!!

[CatsEye]

Surely it's coming. There's a guarantee isn't there?

[Spiffy]

Surely it's coming. There's a guarantee isn't there?

 

That's what I thought!  I did have to renew my USPSA membership so maybe they are just waiting to get that processed!

[bulm540]

Nice gun. Mine will be in .40 cal. ( all I reload).

[dlmeadows]

His is 40 because he's a gaymer

[bulm540]

Yeeeeeeeeeeah!!!! Soft as a mouse fart. Glock for now till Indiana State match. 

Edited July 18, 2015 by bulm540

[dlmeadows]

I feel left out.....I only have a stock 1. So I guess only the M card for me??

Sent from my HTC6525LVW using Tapatalk

[bulm540]

Your just 3/4 gaymer then, nice gun BTW. Damn, the rear sight is cranked all the way up. Dawson .160 x .100 front sight? Stock hammer with polishing or EG hammer?

Edited July 18, 2015 by bulm540

[dlmeadows]

Yeah, I think it was .160 front. need to order a shorter one. Stock hammer spring kit full polish. Edited July 18, 2015 by dlmeadows

[bulm540]

lights up any primers or using feds exclusively?

What trigger pull are you getting?

I am going to play with springs and full polish.I just dont see myself spending $114 on a an EG hammer, well not yet anyways.

Think the correct height is .140 but dawsons are only .120 and .160. 

Edited July 18, 2015 by bulm540

[dlmeadows]

Lights off anything. Put the Xl firing pin in as well. I've not gauged it but it's probably very close to 6lb and much much smoother than the factory setup

[bulm540]

Lights off anything. Put the Xl firing pin in as well. I've not gauged it but it's probably very close to 6lb and much much smoother than the factory setup

Thanks for the info I'm upgrading with the stoeger spring pack and guide rod. 6 lbs da is a good trigger pull. Hoping to get mine down to 6-7 lbs da and 2 lbs sa.

[dlmeadows]

Should be pretty easy. The sear housing and trigger assembly requires serious patience. I've got about 3 hours in mine. It's a PAIN

[Spiffy]

Should be pretty easy. The sear housing and trigger assembly requires serious patience. I've got about 3 hours in mine. It's a PAIN

 

Which is why you're my gunsmith!

[bulm540]

Mine didn't come with the card either. She's a beauty. my gaymer gun as Dlmeadows has suggested. [URL=http://s101.photobucket.com/user/bulm540/media/stock%202%20in%20.40%20cal_zpsasj3whce.jpg.html][/URL]

[dlmeadows]

I'm envious. I need another eaa

[bulm540]

There are still 3 stock 2s left in gunbroker. 1 in .40 and 2 in 9. looks like the price bubble has burst on this guns.......for now.

[dlmeadows]

There are still 3 stock 2s left in gunbroker. 1 in .40 and 2 in 9. looks like the price bubble has burst on this guns.......for now.

My gun fund is sadly embarrassing at the moment

[bulm540]

Me and you both. I will not be able to shoot this gun till after the Indiana State match. I can't wait. 

[Spiffy]

Looks legit to me!

 

[dlmeadows]

Maybe Mike can get you a real one if he gets elected