Search the Community

FOR SALE—2004 SCAG TURF TIGER ZERO-TURN MOWER Well maintained, 1 owner 2004 Scag Turf Tiger for sale 61 inch cut 27 HP Kohler engine 1230 hours $3500.00 TGO Price…listed elsewhere for 3600.00 Built like a tank with HD hydraulics, HD spindles, and HD decking. I am the original owner of this mower. Good tires. Good overall condition. Never use for commercial mowing. Never wrecked. Always run with non-E gas Always kept inside. Regularly serviced. Many new parts. Runs good, but see note below. New parts within the last year. Rear main seal Fuel pump Carburetor Deck drive belt Pump drive belt PTO switch Upgraded ignition coils All standard maintenance—air/oil/fuel filters, etc New parts within the last two years. PTO clutch Starter Seat Battery Cutter deck belt Notes—as I mentioned, I am the original owner of this zero-turn. I have always maintained it and kept it inside. Any service that I could not do was done by mechanic. I am looking to get a new mower, so this one needs a new home. Does it start? Yes Does it cut good? It’s a Turf Tiger with the 61 inch advantaged deck, so of course it cuts good. Can I test drive it? Yes, and I wouldn’t sell it to you if you didn’t. Can I take it home for a week and try it out? No, but you’re welcome to mow my lawn with it while I sit on the porch and sip sweet tea. Does it have a warranty? No, it’s a 2004 Turf Tiger, and although they’re built like tanks, it sold “as is, where is.” Will you deliver it to me? Maybe. If it is paid for in full, and for the reasonable sum of $25.00 to cover my gas, I will deliver if you’re within 20 miles of downtown Columbia, Tennessee… Assuming you can work with my schedule. Does it come with anything extra? I probably have several things like filters or other miscellaneous things that will go to the buyer free of charge. OK, all that sounds great….. So what’s wrong with it? I want to make it clear that I am not a mechanic. That said, I am mechanically inclined and anything that I could not do was either done by the Scag dealer or a qualified small engine mechanic. It does use a small amount of oil. The parking brake could use an adjustment (tightening—I just never got around to it) One of the deck lift assist springs broke last summer, and I have temporarily replaced it with some TSC springs. The mower deck anti-scalp wheels will probably need replaced at some point in the future. One of those little shock absorber things on a steering arm needs replaced. Mower still steers fine without it, but that control arm is just a bit more touchy. The only issue that I think is important, running-wise, relates to using the mower on steep sideways inclines. This mower will go straight up or straight down a 45 degree incline with no issues. But on a very steep incline running the mower sideways will occasionally cause it to sputter. I’m told by a mechanic the most likely cause is the new carburetor that was put on last summer needing adjusted. One of the hydraulic hoses will probably need to be replaced at some point in the future. (I find a few drops on the concrete where I park it after mowing for several hours) So that’s it as far as I know. I will be more than happy to speak to you in person if you have any further questions or would like to schedule a time to come out and see the mower. Mower is located near Columbia, TN So the fine print…. Price 3500.00 TGO members Do I take trades? NO Do I want trades? NO Will I accept any trades?..... NO…. And let me stop this before it goes any further. This is a CASH or PAYPAL FRIENDS AND FAMILY sale only. I don’t want your motorcycle, six dozen eggs a week once your chickens start laying, your wife, sister, girlfriend, or firstborn child in exchange for this Scag. Payments accepted? CASH or PAYPAL FRIENDS AND FAMILY only. Will you get a bill of sale? Yes Will I hold it for you? No. First come, first served Is it still available? This mower will be posted “for sale” on multiple sites, however all sale postings will be removed once the mower is sold, so if the ad is still up, it’s still available. How do I contact you? Text or call. I am often in areas with no cell service, so leave a message and I’ll call or text you back if I don’t answer. You can also message me here on TGO.

I purchased this from a coworker to test it out for a bit. It turns out, what I really, really want is something that integrates more heavily with iCloud and HomeKit Secure Video. I can verify that all of this works and I'll include a 32GB USB drive along with it. Includes the five cameras, mounting hardware, the Sync Module 2, Cable, Power Adapter, and most of the screws. No batteries will be included unfortunately. I'm 99.9% sure this is the "3rd Gen". $150 OBO Shipped.

I have a 2006 Jeep Rubicon for sale. It is manual with Dana 44's. It has 105,000 miles on it. My wife's car died and I can't justify keeping her. It has a lift on it, but I am not sure on the exact height. It is a daily driver for me, but we need to replace her car. There is no rust on the frame. It has a few cosmetic blemishes, very minor. I will list everything that I have done to it in the last year. New Serpentine belt, new rear Rancho shocks. New ball joints in the front. New valve cover gasket. All new belts. Installed a new OPDA (crown). New spark plugs. New Tires, Cooper Discoverer ATR3 LTX 285's (less than a 1000 miles on them.). New multifunction switch. New door bushings. New drain plug. New water pump and clutch fan. New left rear axel bearing and seal. The check engine light comes and goes for the EVAP line (common among TJ's). The jeep runs perfectly. The fog lamps are not wired. They were on there from the previous owner. I am asking $13,500 for it. One caveat, I still have a lien on it so we will have to do the transaction at my bank to close out the loan. In the picture the sidesteps are removed now. When it rains hard there is a small drip that happens on the passengers side. I keep a tarp on it so this doesn't happen. I haven't worked hard to find where it drips from.

2003 Lexus GX470 174k miles 4.7L V8 Beige Leather, 4wd, good tires, new brakes, front struts, wheel bearings, cv shafts, tie Rod ends, abs sensors. 3rd row seating, sun roof, seat heaters, tow package, $10,000 Will trade for a coupe or sedan with a manual transmission, no autos. Will trade down with cash.

The sheaths have been wet molded to that specific knife. Care much be taken when installing/removing the knife as to not cut/damage the leather. I've removed and installed the knives at least 15 times so I know it can be done. The sheath and knife come as package for $155 each. Additionally, knives should never be stored in leather sheaths for extended periods as leather holds moisture and will rust carbon steel knives and may even discolor/stain SS knives. Let's face it SS means "stain less" and not "stain proof". 4.2 MM thick Bohler SS with a Rockwell hardness of 59-60. Each knife is 8 3/4" long with a blade of 4". N690 steel is cobalt-enriched stainless steel manufactured by Bohler, an Austria steel company. This steel is high in carbon and chromium elements with the addition of cobalt for consistency. N690 steel alloy contains high amounts of chromium making it stainless steel. It also has fine grain composition that enables the blade steel to remain sharp for a long time even after exposure to prolonged tough applications. Bohler N690 steel’s ability to withstand stress is a favorite choice for knife makers. It is used to make outdoor knives including, tactical, camping, hunting, and bushcraft knives. 1. Sold to LeftySlade Antiqued treatment on white oak handles with Padauk and G10 accents and liners. Custom mosaic pins and brass lanyard tube. 1. SOLD TO RED333 Red oak handles with spalted tamarind and g10 accents and liners. Custom mosaic pins and brass lanyard tube.

Purchased to basically experiment with a few things. It's really neat but I haven't used it much. It's nearly LNIB. I'll attempt to get some photos up sometime soon but it looks and works great. Meta Quest 2 These can be used either standalone (without a pc) or in conjunction with a PC depending on your use case. There are really many different ways you can use these and it is really actually quite amazing what you can get at this price point.

Weights Product Overview 10 to 90 lbs per adjustable dumbbell Replaces 17 sets of weights Weight selection dial JRNY app with Motion Tracking2 It gets better. Also included: Storage trays Specs Dimensions (Per Dumbbell) 17.5" L x 9.5" W x 10" H (44.4 x 24.2 x 25.3 cm) 17 Weight Settings (Per Dumbbell) 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, and 90 lbs3 (4.5, 6.8, 9.0, 11.3, 13.6, 15.9, 18.1, 20.4, 22.7, 24.9, 27.2, 29.5, 31.8, 34.0, 36.3, 38.6, 40.8 kg) Material Steel, Nylon, ABS, Thermoplastic Rubber Stand Product Overview Ergonomically designed to help protect your lower back Fits any tablet or smart phone Fits BowFlex® SelectTech® 1090, 552 and 560 dumbbells Compact design for an ultra-small footprint On-demand, full-body strength classes now available on the JRNY app. 2 months free now included Dimensions: 26.4" L x 22" W x 26.9" H (67.1 x 55.9 x 68.3 cm) $600.00 cash preferred but will consider trades. Many interest so feel free to make offer. It’s less than the weights plus you get the stand that was a separate piece of equipment These weights are in very good - excellent condition. Just more than I need these days.

Sold

80 rds of factory HP Make offer. Will trade for other calibers.

Do you have a addiction to Chicken Minis? Have you done shameful things just to get a chicken sandwich? Here is your chance to get your fix cheaper and with no dignity loss. I have a $20 Chick-fil-A gift card for sale. For only $15 you can get it mailed right to you. Or if you are into that new fangled online ordering, I can just give you the number. It will save you the wait in line. If you are in the Tricities, I might take a trade so you don't have to explain the disappearance of cash. I just can't help you explain the Polynesian Sauce on your shirt. Trade options. Ammo - .38 SPL, .357 Mag, .45ACP, .308, 30-30, or maybe even some decent 9mm. Magazines - Ruger P85 or P89, Star Firestar, decent quality 1911 full size, or M&P 9mm or .45. OEM preferred, Promag not. AR mags I am probably good on. Other trades considered since I know you have pawned a bunch already under the control of the cow influencers. Cash or most Fee free electronic payments taken

Made from 1/8" thick 1084 carbon steel they are 7 1/2" long with a blade of 2 3/4". They have thumb jimping and come with sheaths shown and equipped with a UltiClip. This clip allows you to clip on you pants to pocket carry of IWB carry without a belt. You can also clip it to most belts. And by simply reversing the clip to the other side of the sheath you can carry on the left side if you wish. $95 each shipped. 1. Sold to bubbadavis Ivory toned G10 with G10 pins. 2. Sold to TNBuck2 OD Green Canvas Micarta with G10 pins.

Here's a Revue Thorman Blue Dial Avaiator Swiss Made Chrono Automatic Movt. Box, Paperwork Orginal Strap and a Alligator Stap w/ quick Deploy Buckle, no scratches, or marks on the case or crystal I've worn it some but it is in great shape. $1100 Cash FTF in the Whitehouse, Goodlettsville, Hendersonville and Nashville are, but can drive a little to meet and complete the transaction. My Wrist measures 7 3/4" and there is some movement on mine were the Clasp is set at.(see picture) Trade Value $1200 Even or a little Cash either way. I'm mainly interested in 1911's, Rifles in 308cal, S&W Pre Lock Revolvers, Older Pump Action 22lr's, SxS, Over Under Shotguns, or a good Semi-Aouto Shotgun, 12g, 20g, ect... Please PM me your trade offers so the add dosen't get clogged up with-" Call Me, Trades you have, or Questions about the Watch". Thanks for looking.

Sold

The sheaths have been wet molded to that specific knife and I have to tell you the knife won't fall out. They are danglers with ferro rod and care much be taken when installing/removing the knife as to not cut/damage the leather. I've removed and installed the knives at least 15 times so I know it can be done. The sheath, ferro rod and knife come as package for $175 each. Additionally, knves should never be stored in leather sheaths for extended periods as leather holds moisture and will rust carbon steel knives and may even discolor/stain SS knives. Let's face it SS means "stain less" and not "stain proof". 1. Sold to LeftySlade A bushcraft style knife with scandi grind made from 4116 SS 3MM thick. The handle is spalted tamarind with red G10 liners. Mosaic pins featuring an image of a Buck. OAL is 9 1/2" and blade is 4 3/4". 2. Sold to Patriotsson Made from 4.4 MM thick Sleipner Steel. Sleipner Steel is a tool steel made by Uddeholm. It's a new generation D2 steel with improved hardness, toughness and edge retention. The steel is used in knife making and tooling. It has desert ironwood handles with G10 accents and liners. There is jimping on the spine . The pins are mosaic and represent the 3 stars on the Tennessee flag.

$125

I’ve got another brand new Milwaukee M12 4.0 battery with charger I don’t need at the moment. $50 in South Nashville or North Franklin

Previous owner likely played with it a bit more than I did. It's an incredible knife. Almost like new but the G-10 does show a few light wear marks and the blade shows a tiny spot or two of surface level rust. A bit of oil and a scrub and it will probably polish clean. I'm leaving it exactly as is. This surprisingly fits in your pocket rather well. It's a knife. $140.00 Shipped or Best Offer on the basis that I found it for $179.95 at BladeHQ. Payment via Zelle or PayPal Friends and Family. I'm planning on sticking the box in a USPS flat rate envelope. I'll cushion it a bit so as to protect it a bit. The knife will arrive just fine, the box may gain a bit of additional wear from doing so.

These are what I'd call medium sized Bowies. They come with combo kydex/leather sheath shown and are $125 each. 1. SOLD to Rob112o Made from 5/32 " thick 1084 carbon steel it's OAL is 11 1/4" with a blade of 5 3/4". The finger guard is SS and the handle is Walnut with G10 accents. 2. SOLD to pfair Made from 3/16" thick 1084 carbon steel it's OAL is 11 1/4" with a blade of 6". The finger guard is SS and the handle is Olivewood with ironwood and G10 accents. Thanks for lookin!!!

2001 kawasaki Lakota sport 300 2wd 5spd with reverse. Has front and rear racks. Front rack has a bend. Comes with original title and owners manual. Not perfect and decent tires, but priced fairy. Slight leak at petcick valve. Ill get it taken care of prior to sale. Good for someone with property who wants something to move around on. Better photos coming or dm for phone number and I can text some. SOLD

Here's a brand new AUXBEAM 8 GANG SWITCH PANEL. Makes hooking up auxiliary lights, winch, on board air compressor ect... easy. Comes with everything shown to wire it up, you can use this for your Pickup, 4x4's, Suv, just about anything. $175 Shipped $165 CASH FTF Payment for shipping- USPS MONEY ORDER PERSONAL CHECK must clear before shipping, I've also have a PayPal account if you want to use that method please PM me for information. I can meet FTF locally around Whitehouse, Goodlettsville, Hendersonville, Nashville and Gallatin area.

Here's a new MEDFORD PARETORIAN Aouto that I have. $285 Shipped or can meet in the Whitehouse or Goodlettsville area for a FTF CASH $275. Shipping $285 Payment is a USPS MONEY ORDER PERSONAL CHECK and I also have a PayPal account if you want to use that method please PM me for information. Thanks for looking.

Made from 1/8" thick 1084 carbon steel they are 7 1/2" long with a blade of 2 3/4". They have thumb jimping and come with sheaths shown and equipped with a UltiClip. This clip allows you to clip on you pants to pocket carry of IWB carry without a belt. You can also clip it to most belts. And by simply reversing the clip to the other side of the sheath you can carry on the left side if you wish. 1.Sold to Snaveba Opaque G10 handle with brass pins. 2. Sold to KahrMan Kirinite handle with brass pins.

Carried it once or twice, may have opened a single package. Still has factory edge that you could shave with. Comes with the complete kit. Got too many blades so I’m downsizing. For Specs: https://www.benchmade.com/products/273fe-2-mini-adamas? SOLD $180 cash FTF, will ship located in Spring Hill/Franklin

Need some.

Two small knives 3.2MM thick made from 440C SS. Total length 6 1/2" with a blade of 2 1/2". They come with kydex sheath shown and equipped with a UltiClip. This clip allows you to clip on you pants to pocket carry of IWB carry without a belt. You can also clip it to most belts. And by simply reversing the clip to the other side of the sheath you can carry on the left side if you wish. I've been trying it out myself for the last ten days or so and it works for me. additonal info provided and feel free to Google it. They are $120 each shipped. 1. Sold to jeremiah Lime green G10 sculpted handle with G10 pins. Thumb jimping on spine. 2.Sold to LeftySlade OD green handle with brass pins. Thumb jimping on spine. Thanks for lookin'!