Search the Community

Marlin 1895 Cowboy edition in 45-70. Production date I believe is 2002. "JM" stamped. 26 inch barrel with Marbles tang sight. Like new with box and paper work. $1400, no trades at this time.

Thermal Clip-on 640. Brand new in box. Does not have ADM mount but does have scope attachment $1600.00 1400.00 You cant get this cheaper.

CMMG Endeavor 308 24” barrel Factory Built, Low Round Count $1700 with Magpul PRS stock $1550 with standard magpul fixed stock located in Cleveland (north of chattanooga)

Remington 03A3, 30-06 caliber. Barrel stamped R.A., flaming bomb, 9-43. Serial number 4050722. Front bayonet band stamped R, front swivel band stamped R. Bolt un marked. Bore bright and shiny with deep grooves. Stock is solid with “S” stamp in well of on/ off switch, stock is also stamped RA-P. $1100.00. Must be TN resident, at least twenty one years of age. Pick up in Crossville. Trades considered: WWII M1 carbine, Colt S P1, Nambu P38. $+/-. Check out my other listings. Thanks

Up for sale is a used Cabela's Model 400 Vibratory Case Tumbler. Its full of corn cob media and works well. Just needs a new home since I no longer have a use for it. Asking $75. Located in Nolensville. PM with any questions.

New TAPCO ambi safety. $20. Located in Murfreesboro. The one without the box is $15.

New Springfield 1911 MIL-SPEC .45 ACP . BARREL 5" Forged Stainless Steel, Match Grade, 1:16 SLIDE Forged Carbon Steel, Parkerized FRAME Forged Carbon Steel, Parkerized SIGHTS Fixed Combat 3-Dot RECOIL SYSTEM GI Style GRIPS Crossed Cannons Cocobolo MAGAZINES (2) 7-Round $600 865-705-4585

New Magpul MBUS3 rear flip up sights. $35. Located in Murfreesboro

New streamlight protac hl-x 1000 lumens handheld light. New in packaging. $60. Located in Murfreesboro

1. SOLD to Kimber451911 Nice small one Made from D-2 steel. Rosewood and G10 handle. 9.5" long with 4.5" blade. Has small a swedge and red mosaic pin. Comes with combo kydex/leather sheath. Was $80 now $70.00 shipped. 2. Sold to ArmyBrat61 Small skinner made from D-2 steel. Burnt ash handle. 7" long with 3.5" blade. Comes with nice leather sheath. $70 shipped. 3. Canadian style hunting knife. Made from 1084 carbon steel. Walnut handle. 9 5/8" long with 4 7/8" blade. Comes with combo leather/kydex sheath shown. Was $80 now $70 shipped.

WALTHER PPK LICENSED WITH SMITH & WESSON FOR A COUPLE OF YEARS. FOR A SHORT TIME S&W HAD A SIGNIFICANT PARTNERSHIP WITH WALTHER . This gun is like new in box with all paperwork, it comes with 3 factory magazines. Caliber marking is the European way & American: 9mm kurz/.380 acp. PRICE $550 Not looking to trade. Thanks for looking.

Aero Precision upper New - never used $100 Will meet in Nashville and surrouding areas within a reasonable distance or ship at your cost Link to details: https://www.aeroprecisionusa.com/ar15-m4e1-enhanced-upper-receiver

About 5 years old but Only 20 rounds fired Knoxville area but will travel from Nashville to Mountain City $2990.00 Rifle + scope Nosler 30-06 ammo included

Selling 820 rounds of 5.56X45 ammunition. All 55 grain. 400 rounds (20 boxes of 20 rounds each) of AAC (America's Ammunition Company-a PSA owned brand) and 420 rounds (21 boxes of 20 each) of Winchester M193 brown box. Note: all the UPCs have been cut off for a Winchester rebate. $340 Firm (approximately $0.41 cents per round). Local pick up in Clarksville only near Exit 1.

Selling 1000 rounds (4 boxes of 250 rounds each) of Federal Black box 36 grain .22LR ammuniton. $60 firm, Not interested in any trades. Local pick up in Clarksville only near Exit 1 on Interstate 24.

Basically brand new Sig P322 Comp in 22lr. Only one range trip. Comes with everything from the factory. Basically, NIB. I am located in Franklin.

Back up for sale is my Like new Ruger PC Carbine, model #19100. Comes with everything when new, box, paperwork, Ruger magazine with magwell installed. Also comes with the Glock magwell. I purchased this new and has functioned perfectly, less than 300 rounds fired. This is a duplicate, selling to fund other projects, not interested in any trades. $500 $450 Firm will sell for $500 if you also want the Ruger Backpacker stock and mags as well. Buyer must be at least 21 and legal to own a firearm, will need to show a TN DL or carry permit. FTF in or around Fairview

2015 Road Glide Special, always garage keep, low mileage. D&D exhaust, cams, Legend shocks. Comes with leather Harley tour pack and sissy bar. Just changed all the fluids, its ready to roll!! $15,000

PICS IN REPLIES, RAN OUT OF ALLOWABLE PICTURE POSTINGS. I drive through Knox every Saturday around Noon. I live in Tullahoma closer to Manchester. Can meet at I-24 and regularly go to Murfreesboro for work. But at 7am! If you want to meet for live fire I can meet you at Terry Walden outdoor range. A few miles NW of Manchester. US 41 and I24 exit. You pay your own 15 bucks admission though. https://maps.app.goo.gl/nZAumhhTCMdwfCAY9 WILL SHIP to your FFL, your expense. All regular money sending methods accepted. Venmo, Chime, discreet PP, cash app. Zelle etc. I'm pretty verbose but if you have questions 480 612 3085 text me. *means includes custom patch. ***means includes custom patch and LAPG soft case. Yes, all prices are in multiples of 20. So I don't have to get change. I don't carry cash. Back up for sale! Glock 42. .380. 2 mags, Siderlock safety trigger. Lightened connector, clipdraw, extended slide stop. Will revert to stock if you like. Pinkie rest on one mag, +2 bottom on the other. Bought from Larry's in H'ville and fired maybe 50 times. Spare ghost connector, stock sights. Light burnish on right side of slide. I have clamshell box. Want a spare box of .380? You got it. S&B ball. $400.00 ETA Firewatchnash has flaked and gone radio silent. Taurus 689 vent rib stainless vent rib .357 6" bbl. 1994 gun. A few handling marks and pimptastic grips! Bought from some dork on Armslist years ago. Sent him money as soon as he gave me a UPS tracking number. Shot it maybe 60 times. If that. Have taken it afield hunting a few times. Want 94 rounds of Eddy's reloads for it? You got it. $400.00 THE STOEGERS Stoeger STR9. A very VERY underrated pistol. Feels great in the hand. Glock-ish mechanicals with a HK VP9/S&W SV9 aesthetic. I have FIVE. Except for the Sport/Combat, none are Optics Ready. Steel mags, steel sights. Takes many Glock parts like connectors, striker springs, underwater firing pin cups, triggers with slight mod and 2 have Clipdraws which are modified S&W M&P backplate thickness reduced by a nominal .017" I have the take off backplates if you'd like it restored. Custom parts listed with each gun. ALL 9mm! NIB, 9mm Sport/Combat with Swampfox Kingslayer. Threaded bb with protectorl, 3-20rd magazines, box, lock, manual, loader, backstraps, optics mounting plates straight trigger, tall fiber optic adjustable sights, cool competition magwell, Box and mounts for Kinsglayer included. Large green circle/cross reticle. $640.00 Bone Stock except mounting the sight. NIB, full size 4.6" black pistol, 15rd, box, oversleeve, loader, cool rubber band for the grip. (marital aid if you've got the length to spare?), want an spare NIW mag? You got it. $300.00 ***Fired <100x, FDE full size, this one came with factory paddle holster, 3 mags, backstraps, loader, that cool rubber band again, box and sleeve are beat up. I've done some trigger work to this and it has a short,smooth Johnny Glocks custom trigger with all the takeup nearly removed. Shoots nice. $440.00 ADD Factory threaded bbl and another mag to either of these for $100. I whined and carped at them for 2 years to import threaded barrels. Got one and then never fired either full size gun with a can on it. (yeah...I know) They are "just different enough" from a Glock barrel that no one would make me one. Fired <100x, FDE Compact 13rd with finger rest. Was considering for EDC...but went back to Gen 2 G19 instead. Did some trigger work on it. Clipdraw modded and installed. A spare full size NIW magazine? Sure. $340.00 The .45s ***Ruger P90, .45ACP My spirit broken, I've given up ever finding a Federal Ordnance/Dasan Korea threaded barrel for it. I've searched, literally for years. Sold dozens at Gun Shows back in the 90s, some in .400 CorBon! Bought it private sale from some dude who thought he "did me" by selling me a gun with a broken mag release spring. (Gunsmith since 1994 dude!) Ruger sent me 2. I might be able to find the other one but I doubt it. It's a KP, Stainless. Decocker. I polished the slide a bit to remove some handling scuffs and it wears Williams Fire Sights. I didn't install them. I have installed a heavier recoil spring and lighter hammer spring and done a tiny bit of polishing and the DA is much lighter, less gritty and SMOOOOOOOTH. I'm a big movie dork and I had some custom Walnut grips made with the District 9 KUDU logo on them. Topped with Hogue Stainless grip screws. Includes 4 or 5 Factory 7rd magazines. The 8rd ones have a flaw where the follower jumps the slide stop and binds up the whole gun. $420.00 ***Tisas 1911 US ARMY pistol. That great Greenish cerakote. Fired maybe 50x. I have the box and manual. I have 4 repro NSN numbered magazines from Sarco but they STICK in the gun. UGH. Don't know why and don't shoot it enough to care. Got some clear "Sweetheart" grips from Amazon. Found some sweet pin ups and had the pics printed on photo paper and painstakingly fitted them to the gun. Sexy nurse on one side and demure redhead on the other. PLUS, custom Savoy Leather holster and mag carrier for it. Savoy did not survive Covid (RIP Bros) and so this will never be made again. Green Open top canted belt OTW holster friction fit, with P40 theme shark mouth and eye, and WW2 aircraft insignia, aircraft panel and rivets embossing, Plus 2 mag carrier to match. The carrier got a small scuff on it during the most recent move. (I am Jack's broken heart) Pistol and leather, $940.00 A real head turner combo. No one has anything like this. I had it made to my weird obsession du jour and waited months to get it. ***Star Megastar .45. Starvel Nickel finish. Stock except for orange paint in the front sight, and longer product improved safety/decock levers. I have the originals if you want them. Magazine safety removed. Can reinstall or tell you how. It's very easy. THREE Nickel factory magazines included. 12rds ea. Built like a tank. There aren't many parts for these but my advice is to SHOOT IT. It's a pussycat and a 3lb one at that! Star made ~5500 of these in .45 and <900 in 10mm. (Mags for these are obscene, usually 125-150 ea) My 10mm not for sale. The .45 is. $860.00 The 10mm ***Glock 20 in bizarre ATACs camo from Factory. I have box and manuals, GEN 4. Has spare backstraps, includes 5 15rd mags. Replaced front sight with blank insert, mounted Swampfox Kingslayer on rear sight plate. Camo has texture like it was installed with a sponge. Really weird and unique. Johnny Glocks smooth short trigger with pretravel removed, lighter connector, Replaced black parts with Vickers dark FDE parts, pins,slide stop, mag release, takedown latch. Kyle Rittenhouse FAFO backplate A really interesting and capable hunting handgun. Fired <100x $860.00 I'll miss this one. Can only find 5 mags total. Maybe some got lost in the move. Or are in the box in the attic. The Stars, or to be more precise, STAR DA pistols with metal frames. It has been my intention for many years to do a series of videos on these interesting (to me) series of pistols and their evolution. Sadly Star as a company was killed by a combination of Socialist government meddling and the AWB 94, the one the serial sexual predator and rapist Billy Jeff Klintoon was so proud of. Sadly, I'll never get around to this. The time and expense to do it properly is just not something I have in great quantity. If such posterity is to be embarked upon, it should be done properly or not at all. And so, this sell off represents years of collecting the best I could find with the hopes of documenting them on video and talking about them at length. ***The Pioneer. Star 28M. Submitted for trials in the mid 80s, this was Stars effort to make a Wondernine. A non hammer drop safety, where the action still worked... (think .22 Firefly, or Walther P22, you engage the safety but the action still works, click click, hammer falls but FP is retracted.) ...was found to be disconcerting to most shooters. S&W 1st Gen dating from the mid-late 50s had trigger disconnect and hammer drop, so did the eventual winner, Beretta 92. This peculiarity is on ALL the Stars until the 31Ps which have a reversed slide mounted safety with a hammer drop feature. This pistol is a full size 15rd DA/SA handgun with adjustable rear and fixed front sight. It has Plum-ish bluing hues and the original hard plastic grips, which never survived a drop on a hard surface. These were replaced later by rubber grip panels with metal cores. Windage adjustible rear sight. This pistol is gorgeous tho. 28M marked, there are some "28DA" marked ones, they are identical guns. No mag safety, I can reinstall for collector purposes $560.00 ***The Standard bearer, Star 30MI Nickeled by Metalife. Bought this one cheap on GB, has some light pitting which was made more noticeable by nickel plating at Mahovsky's Metalife in PA. Did the magazine too. Small parts Cerakoted flat black. Windage adj rear sight. Action is REALLY smooth. No mag safety $460.00 ***The Road Dog, Star 28PK, compact alloy frame. Slightly smaller yet takes same 15rd mags. This 30M variant has some finish and frame wear but still 80%. For some stupid reason I ground on the mags for it and removed the ledge for the mag safety which has been removed. This was dumb. Not sure why I did it. I used to drink. I don't anymore. $360.00 ***La Policia, Star 30P, compact steel frame. A very rare variant, <900 made, the compact above with steel frame for Police service in Spain. 1 mag. Mag Safety intact. $480.00 ***The oddball. Star 31P, Starvel in .40 12rd with 2-11rd S&W 4006 mags modified to fit. A major design change. Notable for 2 big reasons. It was the ONLY metal frame DA/SA .40 ever made by Star. The Ultrastar was a single-stack polymer frame hammer fired gun and the Firestar was a heavy all steel single action carry pistol. This big boy was meant to be a duty gun. Hammer drop decocking slide mounted safety. HEAVY steel frame. Overbuilt. Mags are a problem. Unobtainium and plain enough to not be easily spotted. So I bought some 9 dollar 4006 mags from CDNN and modded them to remove a bump stamped into them (to preclude them from being put in 5906 guns) and a slight mod to the locking area and VOILA! 9 dollar mags for an obscure gun. Yay me. /rolls eyes How about i include 100 rounds of Syntech ball ammo and 59 rounds of Win HP ammo? Sure. $480.00 ***The Failed heir, Star 31P in Starvel. Really nice 9mm version. Includes nickel mag and box, still has warning tag on the trigger guard. Mag Safety intact. $480.00 ***The Plain heir, Star 31P blued. 1 mag. 9mm. $460.00 BUY EM ALL (the Stars) including the Megastar ($3500) and I'll include an out of print coffee table book "Star Firearms" by Leonardo M. Antaris. if you can find this book which covers Star pistols and the company's history from it's beginning to it's end, it's 300 dollars and up. You'll be lost for hours in this book. 630 color pages hundreds of detailed photos, pistols, SMGs, everything Star ever made and some stuff that never got produced., large format with cover. Exc condition. A couple more to add later. My eyes are burning and now I have to switch to phone to add pics.

Tapco ambi safety, hand stop and a h1 buffer 3.8OZ. All are new. $20 a piece. Located in Murfreesboro

Selling my Glock 21 Gen 4 .45 Calaber. I am asking $550.00 for the gun. I have a total of 240 rounds through the gun and it is in excellent condition. Thanks for looking. The Gun Comes With: Trijicon Night Sights (stock sights available) GlockTriggers Edge Trigger (stock trigger available) Extended Slide Release 3 - Glock Magazines Glock Hard Case Gun Lock All Paperwork "The purchaser of the revolver must be a resident of the State of Tennessee, MUST have a TN HCP, Must fill out and sign a Bill of Sale"

Selling my RUGER LCRx 357 Mag 1.87" 5rd Revolver - Black. I am asking $550.00 for the revolver. Did a 5 shot function test cleaned the gun. It is in the same condition as purchased. This revolver has an external hammer for single-action use. I will also include a CrossBreed Holster with the sale. Thanks for looking. "The purchaser of the revolver must be a resident of the State of Tennessee, MUST have a TN HCP, Must fill out and sign a Bill of Sale"

Patriot Ordnance Factory Renegade Plus .224 Valkyrie 16.5 Upper. I am asking $800.00 FTF sales or $825.00 shipped. I have 30 rounds through the upper during the break-in process. The upper is in the same condition as purchased. If upper is purchased locally I will add 5 boxes of ammo to the sale. Thanks for looking. Possible trade options Gen 5 Glocks only!!!

This is a set of factory mufflers pulled off of a 2021 Harley Road King Special. They have approximately 500 miles on them. These should fit all touring models from 2014 through 2023. Please verify fitment prior to purchasing. Asking $150 o.b.o. Located in Nolensville.

New in box Andrews EV3 cam for Harley Evolution motors. Fits '84 and up Big Twins. Comes with Camshaft and installation instructions. Asking $180 o.b.o. - Will ship at the buyer's expense. Located in Nolensville.