Mike

Like I said, I'm not angry that it happened.  Parts break and wear on rifles that get used, I completely understand that.  It's the way I was treated when I called him to ask if there was anything I could do to prevent it in the future.   Those are my experiences.  Take them for what they're worth to you.   Mike

When I say a hole in the rail, it didn't wear completely through. It was not just a mark in the finish. It wore a hollow spot into the bottom of the rail. Anyone that has seen the guns I train with can attest that cosmetic issues are not something I gripe about. Up to that point the mount functioned perfectly, it kept zero and never had any other issues. The only thing was that it eventually wore into the rail. You could grasp the aim point and shift it front to back with minimal effort. Still looking for the pictures. Mike

To a point yes.     As far as R&R the mount I'd say I took it on and off about 20 times or so during cleanings.  The rifle had about 15-18k rounds though it or so.  It was an LMT upper so there should not have been issues with the quality of the receiver.   I would have been fine with him telling me it was all in due course and it happens sometimes.  All I called for was to find out if they had had any issues in the past and how i should proceed for it not to happen in the future.  But for him to flat out tell me it doesn't happen and that it's not his problem.  That's unacceptable.   Mike

I'll have to dig them up.  This all happened about 5 years ago.   The cam on the lever sits directly on the underside of the rail  when shooting or removing the optic it rubs on the rail.  Over time it rubs through the anodizing and into the aluminum.  You can tighten the nut and take up the slack but eventually it keeps rubbing until you have no more adjustment left in the mount, leaving you with a loose optic.   Mike

I've had his mounts chew holes in the rails on my rifles then when I called him to ask what I could do to prevent it in the future, I was told that it wasn't his problem and that his stuff doesn't do that.  Basically called me a liar and told me to fuck off.   I posted all my Larue stuff for sale the next day.

I've dealt with Larue. To put it nicely, fuck him and his bullshit.

The single stage press, powder measure and trimmer all have nuts welded to the underside of the bench so they can be removed to keep them out of the way when I'm not reloading or don't need a them.

No, the NFA came about due to the repeal of prohibition.  They had a workforce of ATU revenuers that were going to be out of a job so they went on to tax and regulate something else.

Pictures?

You won't wear out baffles with .22lr. You will end up having to clean them though. Baffle erosion is more commonplace with center fire rifle cans. Mike

Been here since David did the beta test. Mike

Concealment.  Concrete is cover.

Just wait until you run a belt fed...   http://youtu.be/hB2BRvVfkmM

Joe, I took the course for fun. It was a vacation for me. I have taken the majority of the Tactical Response curriculum as well as courses from Rangemaster, Armed Dynamics, Paul Gomez, and Dave Biggers. No specific goal other than at the time it was the only HRCC course I hadn't taken yet. Mike

PKM

When they were made.

Good read.  I agree with him.       Yep, but it is a hell of a lot of fun.   Mike

Edited to reflect.       Force on force classes are some of the best bang for your buck training that I've been through.   Mike

    It's the most fun you'll ever have getting beat up.   Mike

I was just looking at the civilian side of things in this poll.  It was not intended to belittle or marginalize any of your service or the quality of your training and experience while you were in.  I apologize if it came across that way.   Mike

How much training have you personally sought out? Please answer honestly, the votes are not public. I deliberately left off LEO/.mil training as the majority of that is compulsory. Mike

I recently got a chance to use the OSOE Low Profile Aid Kit (LPAK). I used this piece of gear in the Tactical Response High Risk Civilian Contractor CQB Raids and Rescues class. I mounted the aid kit on the back of my armor carrier in the small of my back. The LPAK has an extremely low profile and while kitted up I could easily sit in a vehicle and operate the controls unimpeded. While it’s never comfortable to drive while wearing armor; it was much less cumbersome to maneuver myself while inside the car. The LPAK sleeve is only an inch and a half thick when loaded and covers six rows of PALS webbing. The internal organizer has enough room to hold an impressive amount of supplies; everything lies out neatly and supplies are easily identified. For my purposes I had my kit stocked with the contents of the Ventilated Operator Kit offered by Tactical Response Gear as well as a few extra items such as trauma shears, QuickClot, chest seals, and extra gloves. When needed the kit is easily accessible with both hands by pulling the large handles located on either side. Accidental deployment is unlikely as the sleeve holds the organizer very securely. During the class I was required to negotiate hallways, doors, and window openings while maneuvering around teammates. By moving the med kit to my back I was able to narrow my profile enough that I never had any problems snagging gear on obstacles or impeding my movement or the movements of my teammates. Mike

Nice video, good to see you out training.  Fighting shotgun is probably one of the most fun classes I've taken.   Looks like you had a good group with Yoshi, Riley, and Fraser in the bunch.   Mike

When is it open?

I have a pair of Wiss shears that I got from my grandfather several years ago. He used them at his upholstery shop for almost 30 years and they are getting a bit dull and have a small catch in them. Where can I get them sharpened near Nashville? Mike