Jump to content

1gewehr

TGO Benefactor
  • Posts

    1,769
  • Joined

  • Last visited

  • Days Won

    5
  • Feedback

    100%

Everything posted by 1gewehr

  1. I carried a Star PD .45 for many years. Finally retired the Star and went with the Springfield XDs in .45 a few years ago once there were a few years of reliability reports. I also have a Keltec P3AT for beach wear.
  2. For anyone that does have these old .22 revolvers, do NOT use modern .22lr ammo. I've bulged a cylinder on one using modern standard velocity .22lr. I still shoot them, but only with .22 shorts. No photos as this was a long time ago and I tossed the cylinder. And yes, it was a US Revolver Co pistol.
  3. Obviously posed. If either of them pulls a trigger, someone will have an 'ouchie'!
  4. Setting friction rings correctly is pretty easy. And replacement rings are readily available and not expensive. Anyone with one of these fine guns, or the similar Remington Model 11, should do this as part of an annual inspection!
  5. 1gewehr

    DSA FAL

    I'm not familiar with the "Voyager" series. DSA had some reliability issues about 10 years ago. But I have not heard of any issues lately. They did fix problems that were reported to them. These days $1500 for a brand new FAL is a bargain. The FAL is well-known for being extremely reliable except in a desert environment. Very easy to maintain and clean. Parts are still pretty reasonable and available, too.
  6. My oldest CZ75 has over 60,000 rounds through it. Only part that broke was the slide stop. I replaced all the springs a few years ago at about 50,000 rounds. My HiPowers were all bought used, so I can't attest to round counts. But, they have been very reliable. When in doubt, replace springs. True for any gun bought used with unknown provenance. The venerable 1911 is always a classic. Get a GI-spec 1911A1 and you will know when to replace the very few parts that might present a problem (extractor). My advice would be to get the CZ75 first. They are all imports, and there may be a day when they aren't allowed in anymore.
  7. Yep, every gun guy (or gal) should have one. Going down to CMP in Anniston is the best bet for picking out what appeals to you. Make sure that you have all the documents you need before going! The OPs rifle looks like a good buy at $1200. The Danish VAR barrels are sought after.
  8. My Grandfather was a big Remington fan. He had a matched set of 12, 16, and 20ga model 11s. I learned to shoot with his Model 12 .22. John Browning learned from his experience with Winchester trying to low-ball him. He sold the rights to manufacture the Automatic Shotgun to Remington, Savage, and FN. And then his brother started Browning Arms distribution in North America! All selling the exact same gun!
  9. TN State Parks have a couple of events coming up Oct 21st - Becentennial Mall, Nashville, Tennesse timeline, reenactors demonstrating events involving Tennesseans from 1500 to present Nov 10,11,12 - Alvin York State Park - Veterans Day event with WWI reenactors, tactical simulations, real biplanes, machine guns and artillery.
  10. Google ( or whatever search you want) "Garand Parts for sale". Several good vendors.
  11. Early in WWII. Half with 1903s and half with Garands. Not a Higgins boat, and one guy on the left has a M1917 helmet. Probably a training exercise.
  12. I think it's actually some type of flower on the right one.
  13. There is a lot being hidden about this incident. Why are so many people spending a LOT of money to keep information hidden? Initial reports from Metro PD were that the shooter choose the school due to lack of security.
  14. If you are not a danger to society, then what good does incarceration do? If you ARE a danger to society, then why should you be let loose? Seems simple enough to me. For some folks, perhaps the old '30 days in the hole' would get them to change their ways. But, I don't see many folks who 've been in more than once changing their ways.
  15. Handgun for Grizzlies Setting aside the whole question of why you would want a Grizzly to have a handgun, it would have to be a very large one. Those guys have some seriously huge paws! (sorry, I couldn't resist based on the way the thread was titled)
  16. Is that just for EVs? I just renewed my tags for my gasoline SUV and it was $34 total. Another reason to stick with internal combustion.
  17. Keep in mind that if the NFA went away, There still would not be anything imported unless those laws went away as well. MG42/MG3 for me as well!
  18. My first handle was on the FALFiles. The Gewehr1 was the Bundeswehr version of the FN FAL. Also, I once wrote a paper for a history class that dealt with the many times in history that one rifle changed history. FYI, my first computer was a Sinclair Z-99 that used a cassette player for storage and hooked up to a B&W TV. Later, I got one of the first IBM PCs with an internal hard drive (4MB). I've never spent nearly that much on a PC since then!
  19. We had a PetSafe that worked very well. Garufa stated the weakness of the wire-in-ground system. The dog learns that once their past it, they're free! With the PetSafe, once the dog gets past the set strength of the radio signal, they get a warning buzz. If they keep going, they get a shock. They keep getting shocked until the get back inside the perimeter. Another advantage is that it's portable. Take the base unit when you go on vacation and set it so your dog can't wander.
  20. That's the Holy Grail of gun banners. Electronic controls on all guns so that the government can shut it down! About as smart as putting combination locks on fire extinguishers.
  21. Remingtons are lots of fun. Very strong design. Swapping cylinders needs to be approached with some caution. Only use cylinders from the same manufacturer as your pistol. Also, double check that lockup occurs when the chamber is perfectly aligned with the barrel. Cleaning black powder can be a pain. Using a dishwasher is the easiest way for pistols. Just make sure you disassemble the gun, don't put any wood in the dishwasher, and run an extra cycle afterwards to ensure that your wife doesn't complain about the odor. Otherwise, use lots of boiling water, scrub well, and oil lightly after drying.
  22. Radical idea: Did you think about getting a slide from CZUSA.com?
  23. Hmmm. That one does not seem to have the corkscrew like the one in the video. Still, seems like a nice, but large, folder.

TRADING POST NOTICE

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions.

TGO makes no claims, guarantees or assurances regarding any such transactions.

THE FINE PRINT

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

TNGunOwners.com (TGO) is not a lobbying organization and has no affiliation with any lobbying organizations.  Beware of scammers using the Tennessee Gun Owners name, purporting to be Pro-2A lobbying organizations!

×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines
 
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.