Search the Community
Showing results for tags 'for-sale'.
-
NO LONGER AVAILABLE NO LONGER AVAILABLE NO LONGER AVAILABLE NO LONGER AVAILABLE Hello, I am located in Knoxville I am selling my henry 45-70 in hopes to pick up a Marlin with a threaded barrel. that being said I am open to trades for a Marlin 45-70 with a threaded barrel. it is in like-new condition, and has never been fired. The scope has been professionally mounted and bore sighted. hoping to get $1650 for the set Separately, looking for $850 for the rifle and $900 for the scope
-
Accu Tac bipod very heave duty have original box. Was mounted on a 338 lapua but never used it. $400 Maryville meet
-
I’m the second owner, very very slight scope ring shadow on the tube. $1100 picked up in Columbia
-
I have 10 rounds of Federal Premium 7mm Rem Mag, 160 GR. Nosler Partition. $20. Local pickup Nashville area (too much to ship small quantities of ammo). I will be in the Memphis area next week and west of Knoxville the week of April 8th or 15th (not sure which week).
-
BERSA THUNDER 40 PRO parts kit no frame $150 shipped
-
Cleaning up and found a box of Winchester 16 gauge shotgun shells. 2 3/4 1 oz 6 shot. $10 for the box of 25. Must meet at Home Depot off of Moores lane on I65 in Cool Springs.
-
Up for sale is one of my AR-15’s, a 10.3" 5.56x45mm, or as I like to call it my MK18 clone. The barrel is a Defense Daniel 10.3", Upper Receiver is a Aero Precision(not M4E1, just the regular one) with a BCM 9" quadrail and Silencerco ASR Flash Hider to attach your favorite suppressor. Bolt carrier group is a non-logo'd Toolcraft Nickel Boron. Gas Block is a Gessele Low Profile Gas block. The Upper was built by a TGO member a couple years ago. I have used it as my primary shooting rifle/bag gun for 3 years so expect the typical wear on the lower/handguard. I have shot it mostly suppressed with a mix of 5.56/.223 Rem and .22LR with a CMMG Conversion bolt. Lower Receiver is a factory PSA MOE EPT with the MOE grip from magpul and PSA's Enhanced Polished Trigger. The Pistol brace is a knock off SBA3 that works just the same. Comes with Magpul MBUS Gen III $600 dollars with ASR Flash Hider and Magpul MBUS Gen III sights. Located in Nashville, TN. Add a Tan Surefire 600U with pressure pad for $200! First I'll take it gets it.
-
for-sale 6.5 PRC Savage Ultralight sort of ??? $1400
mills213 posted a topic in Firearms Classifieds
I have a Savage that I had the factory Proof Research barrel put on. I prefer the target port action and it has a Woox Wildman stock both are heavier than the Ultralight stock and action but I believe the combo is much stiffer and stronger it shoots incredible with factory ELD-X ammo I have only put 10 rounds through it and is already shooting ridiculous groups. It has a Meraki Titanium muzzle brake and the package weighs in at under 8 pounds it has slight marks in the action where the Talley rings were any questions call or text 224-402-4433
-
Installed and decided to go another direction. I have one of these on another gun and can tell you i think it’s an excellent value. Slight scope shadow from being put in a badger mount. 34mm tube $375 picked up in Columbia.
-
Up for grabs is a Pardus pump action 12 gauge. It prefers high brass loads, which works given it's intended role of self-defense/truck gun with high brass buckshot or slugs. Scuffs noted to end of barrel from banging around in my trunk as my truck gun, probably scuffs elsewhere too but mechanically excellent and shoots just fine! Comes with factory box and papers, 3 rounds of Royal low recoil 00 buckshot, 2 rounds of Remington Slugger low recoil, and a nifty Elastic shotshell holder from Walmart, a $6 value! Saturday morning price drop to $100!! SOLD!!! Located in Fayetteville, TN
-
Up for grabs is a Pelican 1750 rifle case in O.D. Green. Bought it to hog hunt with my brothers but it barely fits in my civic and that's with the seats down! Scuffs/scratches on the exteriors as expected from a few airplane rides. The original owner cut the foam to fit an AK-47, I further modified it to fit my AR-15. SOLD !! Located Fayetteville, TN
-
$700 (I paid $1200 new) Athlon Ares ETR 4.5-36x56. Sold the rifle it was mounted on. the scope experienced 160 rounds of 6.5 PRC on top of a fairly heavy soft shooting rifle. No box. Just the scope. I might have the paperwork (instructions) not sure. Scope is perfect. No blems from the mounting. was mounting in a Spuhr mount. Includes sun shade. please feel free to text me 6one5 8one5 48zero8
-
for-sale Ruger mini-14 pre-ban 1985 factory side folder
spdfrk70 posted a topic in Firearms Classifieds
$1200 Good condition see pics 1985 production factory side folder all verified by Ruger The gas block is different on a factory side folder pre-ban may not mean much to locals but there are a couple of places that's still kind of important Regardless I've run at least a hundred rounds through it no issues whatsoever functions flawlessly I've got 10 magazines I believe that go with it some of them are factory Ruger Cash only price firm located north of Nashville must be purchased here
-
Please Read: Used this as an entry into shooting with a red dot. Mounted an optic with the factory plates. Hadn't yet learned that they're subpar. The end result: one of the plate screws was shorn off. You can see it in the top right corner of the attached photo. I have contacted S&W and it's something they'll fix for free. I've lost my taste for dots so whoever buys this - just know that you're going to have to send it back to S&W before you can throw a dot on it. Otherwise, the gun is awesome. Comes with everything it does from the factory: papers, ridiculously huge carrying case, 4 mags, etc. it's had maybe a couple hundred rounds out through it. I'm in Manchester but travel through Murfreesboro and Nashville several times per week. $750
-
$700 P80 frame, Alpha Wolf stainless slide, Glock brand upper and lower parts kits. Slide is direct mill for a Vortex dot and has suppressor height tritium front sight. Gun will come with both threaded and standard barrels, both Alpha Wolf. Comes with factory weight (17 lb) captured recoil spring/guide rod and a 24 lb captured spring on a stainless steel heavy guide rod. With either barrel (full chamber support) and the 24 lb spring/stainless guide rod this gun can safely run full power .45 SUPER loads. Or it can run soft .45 ACP loads with the factory weight spring. I also find that it runs better suppressed with the 24 lb spring, but that may be dependent on your suppressor and load.
-
Almost new Origin Coronado 6” boots with Christie sole size 11 wide. Prefer my slip on style. Worn half a dozen times, $225 shipped.
-
Excellent condition 4" barrel Glock 19 sized. Has HD night sights, and an IWB holster, has easily removable stick on grips and 2 15 round mags box back straps etc $500 northern Mid TN
-
for-sale Sig p226 40 s&w stainless two tone $900
Gringomecanico posted a topic in Firearms Classifieds
I have a rare sig p226 40 s&w two tone polished stainless pistol. Only come with one mag and aftermarket case. No trades local pick up White House tn 900 cash 6154208148
-
Rossi Model 841, .38 special in stainless. The stainless model is hard to find. This revolver is as new in box. Not sure it has been fired other than the factory. No turn line on the cylinder. Comes with original box and box of ammo. $350 (Sold) FTF in Knoxville area. Must be legal to own a firearm. HCP and TN DL required. First "I'll take it", gets it.
-
I have a Springfield 1911 with a 5 inch barrel. 45 acp. It is a lightweight aluminum railed operator. I’ve put about 100 or so rounds through it and it ran great. Wilson adjustable rear sight. $800** Reduced Located in Chattanooga
-
This is a complete slide assembly from a Ruger P89 in 9mm. It comes with the stainless steel slide , the barrel , recoil spring , and guide rod. It is all stainless steel and in like new shape. This is a "de-cock only" slide which allows you to de-cock the gun and let the hammer down and the de-cock lever will spring back up to be ready to shoot again. I'm getting rid of parts that I don't use or need. $95 . I am in Clarksville . I can ship it for $10 more. I don't use electronic money so I ask for a US Postal Money Order. Thanks for looking.
-
These are my wood grips taken off from my Springfield Armory 1911 full-size. My camera wouldnt show the color exact but they are the normal S.A. wooden grips from the factory. They are wood and never used. $25 and shipping is free. I dont do the paypal or other electronic pay, just a US Postal money Order or cash if you are near me.
-
These are 1911 grips from my full-size 1911 S. A. mil spec with the "crossed cannons" . They are plastic. $25 . A US Postal money order is fine and shipping is free. I dont use "electronic" money or paypal. Thanks for looking. I've got a wooden pair from the factory on a seperate ad. If you want to buy both I can take off $5.
-
This is a 22 long rifle gun that with a medallion on the stock for the 125th anniversary of the NRA. Gun is in excellent shape. I am in the Knoxville area and will want to see a TN dl or carry permit when we meet. Don't know much more about the gun but will try to answer any questions.
-
Have a couple items to sell for spring cleanup. 1. Geissele Super 3 Gun trigger assembly Bought back in 2020 to compete in 3 gun matches (never competed due to covid timing) one high power match and some ammo testing, maybe 300 rounds on it. This is the earlier version with curved trigger. https://geissele.com/super-dynamic-3-gun-sd-3g-trigger.html 2. Magpul Carbine buttstock assembly - complete Same scenario as trigger SOLD
.thumb.jpeg.a7b54e97017c6744d0f6ad53e3192800.jpeg)
.jpeg.9e4b3e077fe27f6e94ee4d5650694e56.jpeg)
.jpeg.59cbb0624add169d753da8e7ebfea5c6.jpeg)
.jpeg.141971f51b43d5eb9c2fbab99bbfec8b.jpeg)
.jpeg.fe3b7fa17bacf5338b3c67bd47bef90e.jpeg)
.jpeg.07ee936eb710ea45702670c7d99068a9.jpeg)
.jpeg.c46761b02d17dc7868833c021930d0b0.jpeg)
.jpeg.83cfa03a3c07352c55b75817d5a2026e.jpeg)
