packingvol

I'd put in a recommendation for a Rossi 92. I picked up a stainless 16in model this summer for around $500 out the door. Smooth shooter, very accurate. The length of pull seems a little shorter than the marlins. My wife loves shooting it. The action gets smoother every time we take it out, and we take it frequently to the indoor range now. The 92 will toss some brass down range, due to the top eject. I hate loosing my 357 brass... There has been a LOT of talk about the newer Remington made Marlin 1894's. Go over to Marlinowners.com and you can spend hours reading about it. The pre-rem models with the JM proof on the barrel are getting $600-700 now, and that will generally be for a lightly used gun. I just recently found an older 1894 Marlin in 357, and had to pay $600 for it. Haven't shot it enough to form an opinion, but for me it shoulders a little better than the Rossi (but I'm 6"4" and have a big wingspan). Doubt you'll go wrong with any of them, 357 out of a rifle is super fun to shoot and easy to reload.

This is a pretty smokin deal: Cope's Distributing Bout $17 a box shipped for nickel plated UMC.

Update on my DB9... After doing a lot of reading about feeding problems (primarily the nosedive issue), I decided to clean up the DB9 give it another go. Most people suggest that after firing (or fighting to fire) about 200 rounds, these guns appear to break in and have fewer failures with feeding. I even read suggestions to cycle the slide manually a few hundred times to help break in the recoil spring. I did a little of that, loaded up some ammo that appeared to feed well (115gr Remington JHP) and some 125gr Zero JHP. I also took a box of 124gr HST and 124gr Gold Dot. These are ALL standard pressure loads, the handloads were loaded as lightly as I can with Unique. I got through 100 rounds of hand loads, no feeding problems, flawless performance. I was getting excited. Shot through most of the HST and Gold Dot, again, no feeding issues. The trigger pins did some walking, but that was expected since I haven't put loc-tite on them. After getting pretty amped about a failure free DB9 range session of close to 200 rounds. Click, bang, mush.... no trigger! Trigger failed to reset, and will not reset by pulling back on the slide. I couldn't field strip it easily at the range, and CC's range is so dark I can't really see anything on their firing benches. It's in the bag waiting for inspection and cleaning when I get home. I was on my last magazine of HST when this happened. I'll be calling Diamondback, and it will be making a trip back to them. Looks like a lot of other reports of trigger problems are popping up around the interwebs (I just spent almost 30 mins reading multiple threads about this issue on DBs own message board). Dunno. Be nice if it worked, but this trigger issue has really put another major damper on ever being confident enough in this design to carry it.

I have purchased from these folks several times I the past, always happy with what I got: Unadvertised Specials

Budget will determine this for you. It is hard to beat a saiga, or converted saiga. They have Russian hammer forged and chrome lined barrels, and built on Russian receivers. Most ak47 out there now are parts guns, usually assembled on US made barrels. A stock saiga is only $300, conversion parts will run you about 150 plus your elbow grease. Already converted guns from arsenal are a great deal! Look at the sgl21 K-Var Corp. â„¢ There are also cheaper converted guns: California Legal Russian AK47 Rifle WA B47

I'm scratching my head on this one too... The HK LEM trigger is a consistent trigger pull, from start to stop, every round is the same. It's the same thing every time. The reset is relatively short too, so it's pretty easy to ride the reset for fast follow up shots. All my HK pistols (except for P7) have light LEM installed. The conversion is easy to do at home. Just be patient. There are some great pictorials on HK Pro that can guide you through the swap. If you don't like it, easy to switch back. I'd at least give it a couple of range trips before making the call. I didn't shoot anything but LEM for a while to become very familiar with it, although it really wasn't that hard to learn. My HK45C in LEM is quite possibly... umm perfect.

I've had mine for a few weeks now, and I have mixed feelings. Issue 1 - It cannot shoot my truncated cone type reloads. I reload with Berry's Bullets and they have a great little 124gr truncated cone FP that has done dual service for me in all my 9mm and 357 SIG reloads. When set for "proper" OAL, the shoulder on the cone contacts the rifling, not allowing the round to fully seat. If the OAL is shortened the rounds will not feed properly because the flat tip catches on the bottom of the feed ramp... which is related to Issue 2. I'm ok with doing more RN bullets in the my reloads, so this isn't really a huge issue. It is just annoying because my other 9mm's will all eat this stuff fine. Issue 2 - The feed ramp on this barrel makes it difficult for defensive rounds with a large front cavity to load properly. The cavity on both Federal HST and Gold Dots (124gr) is so "wide" as to get hung up on the bottom of the feed ramp, causing a FTF. This FTF is especially aggravating because the round is now lodged against the feed ramp, under pressure from the slide, but still in the mag. With no slide stop lever, you have to awkwardly pull back on the slide while at the same time pressing the mag release button AND pulling on the bottom of the mag to clear the mag and "stuck" round from the gun. Fun stuff. I've only put about 200 rounds through mine, 50 of Federal HST 124gr, 50 Gold Dot 124gr, and a mixture of RN and FP reloads. I had multiple FTF with both types of defensive ammo, and a handful of FTF with the reloads. With the factory stuff, I had a FTF on just about every other mag that shot through it. It seemed to be influenced by how much pressure is put on the floor plate/base of the magazine while gripping the gun (the mags have a semi-pinky extension). The little bit of play the mag has while seated in the well allows the feeding angle to change just enough as to hang up some rounds. I've seen a fix for this that involves sliding a small rubber o-ring around the mag body so that it is compressed against the floorplate. When the mag is inserted, the o-ring forms a sort of seal and apparently helps eliminate the play that leads to these failures. I can't confidently carry this gun until it will reliably feed the defensive ammo (i'm ok with tweaking minor problems in my reloads). Grip pressure on the mag base seemed to influence the reliability of feeding, and that is not something I feel I can (or need to) pay attention to if the pistol ever had to be utilized defensively. I do not feel that any of my FTF issues were the result of limp-wristing. This pistol requires a good strong grip to fire for any extended period of time, as the recoil can be a bit punchy. I do like the size, and the weight. I am not fond of .380, so this is about the smallest, thinest, lightest auto-loader I'd consider for concealed carry. It won't do me a lick of good if it isn't reliable, so I will keep at it for now.

Interestingly enough, the show is produced out of Knoxville. Lots o tv made around here. the first season was a big success, ratings wise. They really should get back to consulting their firearms experts and listen less to the "tv people."

This second season has been nearly unwatchable. Seems like they do a LOT of staged set demo charge "explosions" of the targets they are supposedly shooting at. It has become a formula: outrageous project for unspecified "contractor," Will shows his ass, weapon is built but not properly tested, then go to a field and shoot at a prefab shed that is filled with set pyro and demo for a big explosion.

Most 74s will have a chrome lined barrel, as long as you stay away from century. I also think the Romanian imports had non chrome barrels. The good "deal" on 74s right now are the Waffen works and interarms. Both are built from matching Bulgarian kits with chrome lined barrels. The Waffen guns are assembled in Knoxville. You will get a Knoxville tn manufacture stamp on the receiver. How cool is that!?

Check out the RS mount: RS AKSM 30mm Scope Mount This is about the best side rail mount I have found. Works great for 30mm tubes. With aim points you have lower third co-witness or the irons. It is well build, lightweight. For me, this mount and a CompC3 was ak optics perfection. One major problem with most ak optic mounting systems is that they place the optic very high. I have also heard good things about the Midwest industries hand guard mounts. I may try one on my folder that is lacking a side rail.

This is how it was years ago... had to take class, then schedule appointment for printing. I believe it was done by the Sheriff's office, in the old Sear's building on Central Ave. Same place my wife had to get printed for her teaching certificate. I guess they changed it at some point, because she was able to get printed at the same place she took her HCP class last year. I guess they are going back to something like the old system now?

Some credit unions are posted. I know UT Federal CU is, and they are about to lose my business once we find a better bank. Sad, I have been with them for over 10 years.

Assuming you don't have any other 7.62 guns in the safe... have you considered going with an AK-74 in 5.45x39? Decent builds can be bought "new" for $550 (Interarms has good ones out now), or high end rifles from Arsenal and other builders for $750-800. A stock Saiga sporter can be had for $350. The Saiga 5.45x39 rifles seem to have no problem feeding reliably from the AK-74 30 round mags without any modification. 5.45x39 is super cheap, and easy to stock up on right now, $270 or so shipped for 2,160 rounds of surplus ammo at AIM. Quality bulgarian surplus mags can be had in new condition for $15 new, or $12 used. Recoil is nil, super fun to shoot.

Sure thing, PM sent.

Well, unfortunately no... I do not have a holster specific to the P30LS. Fortunately for me the holsters for HK45 series fit this pistol just fine, and I have a Mitch Rosen or a drop leg Safari Land that can do the duty if needed. I do know there is a market for good kydex for the P30. Seems like Raven is the only people making them and their wait is something like 12+ weeks. I doubt the demand for P30L holsters is as high, given it's a rarer model and not really pushed as a concealed carry gun.

I have a P30LS, which is just the longslide version with safety. These are gateway drugs... they lead to HK45 purchases... just sayin'

That's interesting. I'm pretty sure the Tomato Head in Knoxville is not posted. Someone correct me if I am wrong.

My two weaknesses, redheads and HK pistols (P7M8 no less). Kudos to you for sharing.

There are a lot of really nice USP 9mm police trade ins floating around right now. They have older night sights, LEM trigger and the jet funnel mag well + two white mags. Most places have them for $500-600. These are truly awesome bargain if you are into the USP. Unfortunately the USP never really felt good in my hands (tried them in both 9mm and 45). Do yourself a favor, and stay away from the P30 and HK45. The minute you handle one you'll start the mental math putting together the scratch to take it home with you.

Not at all, the fluting in the chamber is not pronounced enough that it malforms fired brass. I reload brass fired from my P7s all the time, no issues. This is an excellent handgun. Very accurate, with a SMOOTH trigger. They are a joy to shoot. They get hot after about 50 rounds, nearly impossible to handle without gloves in more than 100 rounds. This is why you buy two... so one can cool while the other is being shot. I've been shooting P7M8 for a little while now, I am amazed at how accurate I can be with this little squeezer. It is small, but heavy, and well designed. You'll find few pistols this size with a true 4 inch barrel. Mine have experienced zero stoppages in 1000 or so rounds I've put through them. Top Gun Supply has Grade B P7 for $499 right now. This is a HELL of a deal. If you are remotely interested in this pistol this is a great chance to check them out. Keep in mind the squeeze cock is a different manual of arms than just about any other semi-auto you've handled, so trigger time is essential to be confident and competent with the firearm. There are also special considerations with holsters. The weight in this gun is different than other autos, it is "high" on the gun, so it needs a holster that holds it well. There are a few that seem to be popular with P7 enthusiasts, including Milt Sparks VMII. I think it should also ride well in a Crossbreed supertuck. I really don't carry mine so I don't have a lot of experience with it on my hip.

I just picked mine up today. It is nearly pristine, doesn't seem to have been issued at all, let alone had more than 50 round through it. This deal is even better than I anticipated. I hope they sell out soon, so I'm not tempted to buy another as gun fund recharges...

Glocks are not "thin" pistols for IWB, BUT I have used the Crossbreed QwikClip for the last two years to IWB my G27. It is one of the most comfortable hostlers I've worn. It will probably even work decently with your standard fitted pants, but buying a size larger may help. It only has a single, wide clip that is easy to take on and off. I generally remove and replace my gun/holster about 2-3 times a day. The kydex is secure, the leather backing forms to the shape of your hip. The single clip also allow the rig to "float" if needed, you can pull it forward or backward to make it more comfortable to sit/drive. I can even ride a bike comfortably with mine. Give it a try: QwikClip

This is a smashing good deal. There was some skuttlebutt about HK screwing over their suppliers with pricing on these, I'm pretty sure TGS posted about this on HK Pro. Something about them selling the previous lot at a low price, with HK promising to balance out their margins with the new lot but then came back with much higher pricing on the new imports. Seems like it got worked out. I'm surprised this has lasted longer than a day. I bought one as soon as I got the "back in stock" email notice from TGS.

Since the course of this discussion has meandered to include ammo, what is the consensus regarding the use of something like Winchester Ranger, which is marked on the box "For LE Use Only, Not for Retail Sale"? Many sellers of this ammo will not sell to non LE, but this is a Winchester "restriction" and not a state-imposed one. This gets me back to thinking about my current EDC rig: a "non-registered" G27 (40cal) with an aftermarket 357 SIG barrel and Winchester Ranger ammo...