Search the Community

For Sale - Sig Sauer Romeo 3 Max - 6 MOA red dot sight. Brand new in the box. Never been used. Didn't fit the gun I bought it for. $550 FTF (Nashville area) or $560 shipped. Cash or USPS money order.

Selling my very lightly used Benelli R1 .30-06 with a Leupold VX-II 3-9x50mm

Loose pack for bulk storage in an ammo can with fresh seals. $625.

Realized yellow is just not doing it for me. Practically new Doxa Divingstar Sub 200 on bracelet, 3 weeks old. Has the balance of the warranty left. Running at +1spd $875 in Nashville area.

Someone has to have a spare TGO sticker or two laying around. I've had one on my Jeep since about 2010. Need to find another one as I'm out and the one on the Jeep was coming apart.

PSA AK74 triangle folder with toolcraft trunnion, bolt, and carrier. Also has ALG trigger, 7 Bulgarian 30 rnd magazines for 800.00 Also have a unopened case of 1080rnds of Russian 7n6 5.45x39 ammo for 600.00

I have a Stoeger M3000 Freedom for sale. Takes 3 inch shells It has an 18.5 barrel 7 round capacity from factory with a MOA Precision 2 shot end cap for a total of 9 rounds. Ghost ring sights Magpul stock with MOA Precision stock adapter. Located in Oak Ridge Not looking for trades at this time. Asking $650 obo. 425-243-4568

Less than 100 rounds. Has extended releases and night sites. Great gun just never gets any use. Will meet in Lebanon/Mt Juliet area. Mags pictured are included. No case. $500 firm. Need to see ID at sale. Trades considered: 9mm compacts or smaller

This is my Glock 43 in 9mm. It's had only 10 rds through it since new. There is no wear at all on it. Just like new. I put Talon grips on it but they are easily removed , they just peel off. It comes with the manual , 2 magazines , and case. One with the finger-tip extension and the other is flush. $365. I am in Clarksville but I can meet a well established TGO member to buy it up to 50 miles from my area. Thanks for looking and feel free to ask me any questions about it. Face to face. No shipping.

This Sig P229 needs a new home and I'm ready to deal. It has had some rounds sent through it but it has been sitting around a few years, so I ran 50 rounds through it this weekend, and it functioned flawlessly. It comes with the original factory box, docs and lock, as well as 5 mags (3 - 12rnd and 2 - 10rnd). It has the short reset trigger (SRT) installed, and the original parts are also included. It has Hogue rubber grips and the original grips. I am also including 100 rounds of Winchester Ranger T ammo. I'm ready to move this and cash is king, but I will consider trade offers for quality handguns. Cash price $550 OBO You can text me at 4two3-6o5-8two49

Selling this unfired, new in box PSA (Palmetto State Armory) 16 in. barrel AR-15 in M4 furniture. Multi-cal (5.56 or .223). Carry handle is mil-spec manufactured by PSA. It mounts to the rail and can be removed to install a different optic. Furniture color is FDE (flat dark earth). Two boxes are included, one for the lower and one for the upper. A magazine was not included when I bought this, so one is not offered. $560 FIRM. If someone should write and offer me less, they will be ignored. Not interested in any trades, so please do not ask. If a person should write and ask me about the PSA warranty and whether or not it is transferrable, I would refer them to the PSA help website at Help Center | Palmetto State Armory , especially after the person has already agreed to buy it. Local pick up in Clarksville only. (This means that I will not meet you halfway between Clarksville and Knoxville or between Clarksville and Memphis, or between Clarksville and anywhere. Anyone who asks me this will be ignored.) No shipping. Buyer must be at least 18 years of age with valid state issued or military ID. Buyer must sign a Bill of Sale. If the listing is still active, the rifle is still available. Manufacturer's description: Upper 16" Barrel Length 5.56 NATO Chamber 1 in 7" twist 4150V Chrome Moly Steel Barrel, Nitride Carbine-length Gas System M16 Full Auto Bolt Carrier C158 MPI/HPT Bolt Charging Handle FEATURES Barrel: 4150V Chrom Moly steel. Chambered in 5.56 NATO, with a 1/7 twist, M4 barrel extension, and a carbine-length gas system. This M4 profile barrel is finished off with a standard handguard in Flat Dark Earth, F-Marked gas sight base, and A2 flash hider. Upper: Forged 7075-T6 A3 AR upper is machined to MIL-SPECS and hard coat anodized. These uppers are made for us right here in the USA by a mil-spec manufacturer. Bolt: Full-auto profile bolt carrier group. Milspec Carpenter No. 158® steel bolt, Shot Peened, High pressure tested, Mag particle inspected, Gas Key Hardened to USGI Specifications, Fastened with Grade 8 screws, and Staked Per Mil-Spec. 8620 steel M-16 profile carrier is chrome lined and phosphate coated. Lower: Manufacturer: Palmetto State Armory Product Line: PA-15 Platform: AR-15 Includes: Stealth Lower Furniture: Classic Finish: Flat Dark Earth FEATURES Machined from Aluminum Forgings 7075-T6 Hardcoat Anodizing: MIL-A-8625F, Type III, Class 2 Milspec diameter Receiver Extension M4 Stock, FDE Staked M4 Lock Nut Standard Carbine Buffer Un-notched Hammer compatible with 9mm use

Kimber Warrior II with less than 100 rnds through it possible trade for commander size 1911 Night sights, comes with hard case, Kydex holster, and one magazine. Trade for ?? Commander Size 1911 or let me know what you have, never know...

DP12 Shotgun by Standard new in the box.

DP12 Shotgun by Standard new in the box. $1200.00 obo

Used VZ 2008 Bonesteel handguard set FAB Pistol Grip FAB Folding Stock Ambi enhanced magazine release Enhanced bolt catch/release Six magazines and original pouch Original furniture and FAB handguard $1000 I would prefer FTF at an FFL around the Knoxville area, but shipping can be worked out.

Like new CZ Scorpion Carbine. Comes with two mags, Magpul extended mag release, Magpul grip, and an inexpensive red dot. $800 Can met in Franklin area. Thanks.

Romanian Sar 2 Ak74. Great rifle, $1000. Can meet in Franklin or Erin Area.

Plainfield Machine 30 cal. M1 Carbine, Dunnellen, NJ - $800 OBO Chattanooga, TN Has Rockola Slide and Trigger Housing Plenty more pics or can FaceTime video to see them. Must be legal to purchase/own firearm. Prefer to meet near Chattanooga, TN. Have others as well.

I'm not necessarily trying to move this but I want to see what's out there. It is a Sig Tacops 1911 in 45acp. It's in very good condition and comes with 4 mags, night sights and a zippered soft case. The plastic case is a Sig 1911 case but not the original. I also have 500 rounds of FMJ and 80 rounds of defense ammo that can be included. I am looking for a commander size 1911 or a 10mm 1911. I would also consider a Sig P229 or P226. I will give or take cash and/or ammo depending on the trade. Cash price $1000 for the gun, $1300 for the gun and ammo. You can text me at 4two3-6o5-8two49.

Up for sale is a cp33 by Kel-Tec. .22LR firearm that holds 33 round of rimfire goodness. Firearm in great shape, comes with one magazine, some inexpensive red dot and the 3-D printed barrel shroud/charging handles as pictured. Suppressor not included. $400 Located in Nashville, TN

Both are the same blank made from Sleipner steel and is known for it's durability and reliability. It is celibrated for is sxception sharpness, edge retention and resistance to the elements. It has high chromium and it has better corrosion resistance than regular carbon steels. They are 4.4mm thick and have a Rockwell hardness of 59-60. OAL of 9 1/2" with a blade of 4 1/2". They come with leather over kydex sheath shown and are $125 each shipped. 1, Padauk handle with G10 accents and liners. Mossaic pins 2. Sold to mike_f Desert ironwood handle with G10 accents and liners. Brass pins.

Up for sale is a Winchester Model 1894 Saddle Ring Carbine chambered in 30 WCF (30-30) made in 1911. It is close to, but not all completely original. This one was pretty rough when I started. When I work on an old rifle, I don’t want to make it “new”, just clean and functional. It’s not a collector’s piece, but it is now a really nice historic old shooter. The rifle has been completely disassembled, cleaned and put back together. There was little (if any) original bluing left on the metal. I did not try to make the metal look new, but I cleaned it up and gave it a vintage look with cold bluing. The original gum-wood stock was in pretty rough shape and had, at some point in the rifle’s 113-year life, been refinished and sanded a bit too much. The original gum-wood forend was also sanded and bit too much and is split at the front. I cleaned them up as best I could, but they were still just to ugly. I replaced them with a reproduction set from Gunville.com in American Black Walnut. After hand fitting the new furniture, it was finished with a hand rubbed oil finish. The original stock and forend will be included. The saddle ring is also not original to the rifle but I believe it is an old piece. It also now has the correct v-notched ladder rear carbine sight. $950, OBO. Located in Nashville. For sale/trade to persons who can legally own a firearm. Trade I’m interested in is a Marlin GBL or Trapper in 45-70 with a threaded barrel. I’ll add scratch as needed. I can send more (and higher resolution) photos (including some before photos) upon request.

$40 shipped Troy Claymore linear comp for sale, has less than 100 rounds through it. Comes with crush washer. ***Have this in a bundle with a WC 5.56 8" and gas block/tube, but listing separately just in case anyone wants just the MD.*** PayPal FF(preferred), Venmo, Zelle