asu174

I actually just put about 180 rounds through it and it’s a laser. Was pondering closing the ad or just never bumping it on the drive back. But it’s available No LE ammo- just AE 40gr, some hollow point FN (SS195LF?), and mayyyybe I’d consider selling a small amount of my green tip SS198LF, but I really don’t want to split that case open since I also have my PS90 SBR that I’m definitely keeping.

Located in Murfreesboro, local to me pickup. No trades. Must be 21 and willing to flash Tennessee ID. I also no longer respond to “PM Please” requests- established members or benefactors only, please. FN Five Seven 5.7 pistol. Gen 5, MKII (most recent version). Trigger breaks just shy of 3.5 lbs and it is incredibly consistent. Shoots absurdly flat, virtually no recoil. Round count is under 500 (like most of my guns), purchased in 2018. I haven’t shot it in a while and it deserves a better home. It was sent off to Elite Ammunition for their $450 accurizing package and $250 MKII red front, green rear fiber optic sights. Elite Ammunition takes 16-20 weeks to do this kind of work. Accurizing package includes: Removal of magazine safety Smoothing of the hammer to sear contact. Greatly improves trigger action and creates a crisp release Reducing trigger pull by 50% Increase hammer spring pre-load 20-30% for crisper disconnect Chamber lapping. Aids in extraction and protection of coating on brass Polish and Tune extractor Polishing and Fitting (too much to list) and a detailed cleaning including correct lubrication Each gun is tested to deliver at a maximum of 3 1/2-pound trigger pull before leaving the shop. At the time, they were also including a 3 pack of extra power mag springs that normally sell for $35. Those are included. I didn’t particularly care for the Elite trigger shoe. It was slippery and too short for that trigger guard, IMHO. I swapped it out for one made by Eden Perfection and it’s perfect now. It really is a ridiculously good trigger. The slide shell is made of polymer and there are some minor dings on the top of the slide. Comes with holster. G-Code mounting system, made for use with Streamlight TLR-1 light. I have an extra, old TLR-1 (no S) I will include for you to use the holster. I don’t have the factory sights. I do have the factory trigger shoe. Gun, box, papers, holster, TLR-1 light, 3 mags with Elite Ammo springs (and factory springs). Adding 5 more mags (with springs) to package for a total of 8 mags. $1400 firm

Location is Murfreesboro. No trades, come and get it. Bought in 2019, traveled to Vegas for a match and back. It’s been stored since. The top layer of foam that is supposed to be cut is trash- I’d recommend something less dense like the pull and pluck stuff. The other layers of foam are fine. I ended up just putting the rifle in a lightweight bag inside the case. Product Info $180…$150

It’s smaller than the G19. Subcompact vs compact. Capacity is 10.

Updated with new stuff

Fits both. Forgot to mention accessories only available for purchase with rifle in case I keep it. Ad updated.

Located in Murfreesboro. Initial comms in PM please- no “interested, text/call me posts”. No trades. Now with a 16” barrel…my backup SCAR. The gun has less than 1K through it, BUT the 16” barrel was recently acquired with “less than 200 rounds” as stated by previous owner. It looks basically new- no carbon on the gas block or front sight. It’s in excellent shape. All the go-fast accessories have been removed from the rifle, available with purchase of rifle only. Includes: Impact Weapons QD sockets in rear of stock (both sides) One USGI mag Parker Mountain Machine black rear QD socket Hogue grip $2500 $2400 Available for purchase with sale of rifle only- won’t sell until rifle sells. NOT INCLUDED: Geissele Super SCAR trigger (worth every penny) $275 Parker Mountain Machine Battery Control Device (similar to BAD lever) $35 Black Magpul MOE+ pistol grip, modified by Parker Mountain to fit SCAR $20 Magpul extended safety set $10 Magpul extended safety set $10 Parker Mountain Machine safety levers, black, long and short, “Ergo” style I think $30 for set Parker Mountain Machine oversized mag button, black $40 GG&G angled charging handle $18 Kinetic Development Group SCAR angled safety (some finish wear) $30 Kinetic Development Group SCAR angled safety $40 $2800 with all accessories shown NOT INCLUDED:

Thank you. I’m reaching a selling stopping point with almost all SBRs remaining. Haven’t really decided if I want to unload any pistols (all Glocks, CZ, and one Five Seven with more $ sunk into it than the gun cost), but this forum will be the first to know.

It’s still sitting here. I decided to buy a 16” barrel for it since selling NFA items is a hassle. Was going to list as a 16”, but lost interest in selling it. I’ll message you.

Dropped to $900. Got my eye on some RC stuff.

Bump

Location is Murfreesboro, priced on a you come to me basis. Initial comms through PM. No trades. Must be TN resident. Steyr AUG, model AUGM1MUDH. Bought new in late ‘19. I really didn’t shoot it much. 300-500 rounds through it. Minor safe wear, nothing if significance. Best bullpup trigger I’ve felt with that 20/20 sear mod in it. Highly recommend that. I have the extras priced a la carte below. Included: Gun, box, manual, sticker One 30 round mag Surefire SOCOM 3 prong 1/2x28 flash hider Factory parts (will be reinstalled if you choose not to get corresponding part below) $1400- will eventually cross post elsewhere Available- will not sell anything below until the gun sells: 20/20 Sear Mod $70 PuP light Mount $50 Steyr suppressor gas regulator $100 (hard to find) Gearhead Works charging handle $25 Midwest Industries Sling Swivel (rear) $20 (10) 30 round mags (not pictured), excellent shape $20 each, $200 total (2) 42 round mags (not pictured), excellent shape $25 each $50 total Also not pictured gen 1 Vortex AMG UH1 Huey, with box. $300

…

Bump

Available again.

I have 5 of the AFO II. All partially serrated, though. Just sent them back to Benchmade for sharpening. I don’t get the ad. Are you selling these?

Bumping because I had the wrong model listed (this doesn’t have a side rail) and I was priced a little high based on that. Dropped. It’s probably going to sell elsewhere, would love to avoid shipping.

Location is near Murfreesboro. Please PM me with questions. I don’t respond to “call me” posts/messages. Please be a TN resident and willing to flash ID when we meet. I’m not looking for trades, just looking to thin my collection. Glock 19C (compensated) gen 3. These come and go over the years and when they are hard to find, the slides/barrels go for $$$. All matching serial numbers on the 19C, with box, 1 mag. Stock internals (with plain black aluminum slide plate). Trijicon HD night sights on the slide. Stippling and finger groove removal by We Plead the 2nd aka Pro 2A Customs aka well-known to the local guys in Arizona, you never heard of them here. Had an extra 19 frame chopped by the same guys to 26 length. It’s kind of a 26L (long slide) if that existed. Includes a 26 magazine. You can flip back and forth between the two frames. More mags available to buyer. Also an Apex trigger kit. Minus connectors, more. $580, includes box.

Location is near Murfreesboro. Please PM me with questions. I don’t respond to “call me” posts/messages. Please be a TN resident and willing to flash ID when we meet. I’m not looking for trades, just looking to thin my collection. It’s the best shooting pistol I own (hence the middle of my avatar), but I’m not shooting competition anymore and it’s just sitting here now. I do not know the round count, but it’s never had an issue and runs like a top. Finish looks really good, although there is some wear around the muzzle. This is a used but high quality gun. FYI It’s single action only. Includes: 2 mags, one has a +3 CZ Custom baseplate, one has a +0 (factory baseplates included Extended thumb safety- fitted and installed by CZ Custom (original safety has been located and is included) CZ Custom thin aluminum grips Fiber optic front, plain black adjustable rear Kydex holster with RTI adapter Giant box, original paperwork $1000 shipped I have (7) extra mags with Taylor Freelance +3 baseplates (and originals) that I would sell. These are pictured below. They have an orange “gun candy” cerakote on them. Original baseplates would be included. $50/mag, only available with gun. There is a black oil line in some of the pics above the right side (left thumb) safety. I added more pics with it wiped off. $900

Location is near Murfreesboro. Please PM me with questions. I don’t respond to “call me” posts/messages. Please be a TN resident and willing to flash ID when we meet. I’m not looking for trades, just looking to thin my collection. Bought this on a whim. K-VAR had one come available long after these were discontinued. I have two others, so why not. Took it to the range 1-2 times, low round count. Folding stock. It’s a 5.56/.223 AK, so ammo is obviously much easier to get. INFO HERE Extras: ALG Defense Trigger (note: this was on another AK prior to this one, so it’s more used than the rest of the rifle) Extended Safety (from AK Operators Union) Rifle Dynamics V2 rear sight (1) Circle 10 30 round magazine Factory included: Paperwork Oil bottle Unused trigger Safety 10 round mag Rear sight Surplus sling Box (not pictured, but don’t get excited- plain white, sticker on side, really flimsy) Available to buyer only: (3) New Circle 10 30 round mags $42 each (4) New FB Fabom Beryl 30 round mags $25 each Black Magpul MOE handguards $25 Getting some bites on ar15.com, reducing here to avoid dealing with shipping. $1800 local

Relisting. I sold the heavy Surefire light and swapped it out for Magpul furniture. Much better ergonomics. Location is near Murfreesboro. Please PM me with questions. I don’t respond to “call me” posts/messages. Please be a TN resident and willing to flash ID when we meet. No trades- trying to get the collection down to a specific number. Bought this from another member in December. I rationalized it because the Vang Comp work is worth $800 alone, (that’s a hyperlink) not to mention the 590A1 is no longer being produced. Two range trips, about 50 rounds through it, shoots tight groups, more than reasonable recoil for 00 buck. Vang Comp claims 12” pie plate accuracy at 25 yards with buck. I didn’t get to test that claim, but it does pattern absurdly tight. This was apparently sold as new in this configuration, so it’s a “factory” Vang Comp gun. Original owner said us was a long-time low-use safe queen and I believe he paid around $1600 for it. Upgrades: Vang Comp fully tuned action Vang Comp Stock Vang Comp "back bore barrel process" (modifies to a very tight internal choke without tubes- lengthens the forcing cone) + forward barrel porting for recoil control Front hooded tactical night sight (looks like it takes any AR sight post) Rear ghost ring sight Rear Picatinny optic rail Large dome head safety button Stainless steel tube follower Heavy duty tube spring All steel mag “breacher” (or melee weapon- it’s really sharp) extension tube. 6+1 capacity with Wolf 00, but I suspect it’s 7+1 with slightly shorter shells. It’s sooo close Magpul Furniture Velcro side saddle with 2 saddles $880 FIRM, you come to me (Live rounds not included) That’s lint/dust on the ports in the third picture. No wear.

Location is near Murfreesboro. Local pickup only. No trades. I’m really busy and depending on time of day, we may have to do a porch pickup if I’m on a conference call. Smaller stuff added (mags, ammo cans, etc). Please make it worth our while- not desperate to sell, also not wanting small transactions. Also, please keep all comms in PM. KE Arms KP-15 polymer AR lower receiver with DMR trigger and ambi safety. FDE color This one for $329. $180. SOLD S&B 115 grain 9MM, 1K rounds. 3 sealed cases available $290/case ALL SOLD Remington UMC 124 grain 9MM. 2000 loose rounds in 50 cal can. $660 Aguila Super Extra High Velocity 40 grain 22LR, 3,000 rounds in .30 cal ammo can. $180 SOLD Speer Gold Dot 9MM 124 grain +P self defense ammo. 100 rounds in plastic case, $75 SOLD AR Magazines 8 PMAG 30 round black windowed M3 $12 10 PMAG 30 round black non-windowed M3 $10 each 10 PMAG 40 round black M3: $14 each SOLD 8 PMAG 30 round FDE windowed M2: $13 each 8 PMAG 20 round black non-window M3 $12 each 5 left 7 Palmetto 30 round black aluminum, gray anti-tilt follower, some mild storage wear $8/each 3 DSG 30 round gray aluminum, FDE anti-tilt follower, some mild storage wear $8 each (2 left) 3 FN 30 round black steel $22 each Empty 50 cal cans. 7 available. 5 are Blackhawk, 2 are surplus. $10 each SOLD Paper targets. Huge, great for indoor ranges. Also good to stick shoot n c targets to. I’m guessing 140-160 targets here. $35 Voodoo Tactical MP5/PCC case. Very light use, as pictured. No shoulder strap included. Fits guns under 28”. $60 SOLD Voodoo Tactical double rifle case, 36”. Includes the backpack style straps, but no shoulder straps. This one does have a burn mark on the divider from a suppressor, but is 100% functional. $40 Voodoo Tactical double rifle case, 36”. Includes the backpack style straps, AND the shoulder straps. $45 SpecOps backpack (right). Well used. Has a hard-ish backer in it to stay rigid. This thing is covered in webbing if you’re one of those gear guys (that I used to be). $20 Podavich Speed Loader. Made in Ukraine. $40 SOLD

First pic shows the box, says FFP and First Focal Plane.

Location is Murfreesboro off 840 and 24, priced as a you come to me deal. No bill of sale, but must be 21, a Tennessee resident, and not a prohibited possessor. Not looking for trades and not looking to drive across Tennessee to sell it. Continuing to clean out the safe and get rid of stuff I’m not using. I’m getting down to my last few rifles that aren’t SBRs. Upper was originally bought as a Palmetto State complete upper. It has a stainless .223 Wylde (shoots both 5.56 and .223) 1/8 barrel. Barrel has been painted black to get rid of the shine, but it can be easily removed. Barrel has roughly 1K through it, super accurate. Had it as a backup for when I shot 3 gun and it never saw action. BCM MCMR15 handguard. Surefire SOCOM QD 3 prong flash hider. New-ish unmarked Palmetto State nitride BCG, MPI bolt. Charging handle is a KE Arms extended, used. FDE MLOK panels included, top ladder panel is not. Lower is a KE Arms KP-15 one piece polymer receiver. These are similar to the old Cav Arms receivers, but the 2020 edition that is way better. They’re lightweight and pass every torture test with flying colors. If you follow In Range or Forgotten Weapons, this is the lower made for the WWSD (What Would Stoner Do) project. Stock is A1 length. Trigger is a $150 KE Arms DMR trigger- I have these in all of my ARs. KE Ambi safety. Lower sells for $349 as configured. Lower has about 200 rounds through on it. Brand new USGI mag. Pictured Samson sights NOT included, but will add for $50. $560

I didn’t think BFG was available on gen 3