Jump to content

rab

Active Member
  • Posts

    130
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by rab

  1. I when out and shot a 100 rounds of CCI mini mags had no problems ,I got another 100 rounds of the CCI I want to shot to see if there is a breakin issue. still have over a half of a box of the winchesters that I started with that I will use after the second hundred. I do like the way this gun shoots,had to ajust the sight to the right about 3in. at 12 yards. I had gotten this gun to carry when fishing for it will fit in the small pocket on my waders. Thanks for all the help getting through this
  2. This was truly some good infor. Some is I believe to be over my pay grade but good to to have stored on my hard drive. Too answer about the two mags, had to buy the 2nd one,30 bucks dealer said that a good price. Also I will try the CCI mimi mags hope this will help,for I like shooting the bulk because of the price. If I continue to have the problems with the feed maybe the dealer where I purchased it at can help for they acted as to be customer friendly, was my 1st time in thier store in Elizibethton ,Tn. Thanks for the help and good comments
  3. New, dealer said 3rd gen. Do you find this a problem not being able to lower the hammer, how are you to lower hammer without loading a round without emptying the mag?
  4. After two weeks of checking and reading I got the Walther P-22 ,Sure hope that it was not a mistake for all the reports I saw were good .BUT I have two issues 1st when there is no mag in the gun I can not lower the hammer.I am asking for anyones answer who has or knows if this is normal for the manual said remove the mag when decocking and slowly lower the hammer, 2nd the only rounds that I had were Winchester bulk from Walmart that I have no problems with in my S&W 15-22 .They didn't feed well in the P-22 , they would eject but would not load, this happen 8-10 times in 40 shots in both mags. Like I said I need to hear form anyone who can share some light on the issue THANKS
  5. Thanks Bkelm18 I guess I will need to get some infor. on the TVA property for I think that all the tail waters below the dam are called TVA waterways
  6. You guys have surly got my head spinning now. If I have an HCP on my person, am I allowed to enter a state park, For some of the places that I park my truck when fishing is TVA and State owned. I have always carried when I am in the water. Not because I fear the wildlife just the nuts.
  7. dolomite, do you have an answer about the barrel on M&P 15 it is marked 5.56 nato 1/9? is this the 5-R barrel you were speaking of?
  8. Dolomite how can you tell if you have a 5R barrel, I have a M&P15 and on the barrel is 5.56 nato 1/9
  9. Hey Guys what is the advanage in changing to a free float tube? And is it worth the cost.
  10. Dolomite, Sure was glad to hear someone say something about S&W M&P 15 for I not the smartest on AR-15 but my frist one purchased was M&P 15 and it has worked well for me, I got the flat-top with a Nikon 3-9 and have used high price and some cheaper rounds and they all work great. Anyone have any problems with the M&P -15
  11. I had post a request for some infor. on the PS 380 , but had given the wrong information for the help ,I want to purchase a PK 380 and a crossbreed super tuck holster. but know very little about either so I will welcome any help on both.I was looking at the one in black and nickle slide,and is there one that comes with lazer sight, not a add-on
  12. rab

    PS 380

    I guess the reason I gotten no reply on this is my fault. I had give everyone the wrong info. What the guestion was to be on was A WALTHER PK 380 (NOT A PS 380) Hope for some good replys now.
  13. Like Alwaysonjohn said about the 35 Its big, ButI love it, mine in 40 and 357 sig, Its shoots a whole lot better than I can. When I on you can really drive nails with it.
  14. rab

    PS 380

    I been looking at the 380 in black and nickel, I sure like the look of it. This would be my carry gun for I wanted something a little smaller and also so lighter. I know it not as strong as my Glock 40. Also so has anyone tried the ps 380 in a crossbreed super tuck?Sure would like to hear all I can before I spend the money. HELP
  15. What I will be looking for if I go is a deal on a 512 eotec, sportman guide has the best price that I can find this week $409.00 with my club discount. Anyone seen a good price on eotec?
  16. Is the Kingsport show worth the price and has anyone found any good deals, I have only been to the Goodman show in Dayton Oh and that was about 7 years ago .I was reading another thread that said most of the stuff is over priced or very poor quality. I had plan on going with my son, we both love our guns ,but hate to waste the day. What do you think
  17. rab

    Cleaning my AR

    Hoppes 9 is what I use for my cleaning But I would love the get my hands on some Ballistol, before I retired I could pick a can up at work but never seen it over the counter ,where do you get yours luvmyberetta? Thanks
  18. rab

    Cleaning my AR

    When using solvent to clean the bore and bolt will it harm the composit parts? There some lead deposit that get on the composit parts of my S&W15-22and the only way I know is use the solvent to clean it off, any help from anyone THANKS
  19. Has anyone tryed the 22 sparrow from Silenerco? i had the chance to look at one and it appeared to break down for cleaning without much effort
  20. Thanks again JeffsSig I just check my permitt an you are correct
  21. Sorry if I appear to be dum or lost but if I have a CC permitt am I permitted to open carry? If so I have heard that people have been sited for letting thier gun be seen by mistake when a shirt or coat would ride up. Please help be with this before I make a mistake
  22. rab

    380

    Why has no one said a thing about the walther PK380, That's what's I was thinking of get myself for Christmas
  23. rab

    S&W AR-15 Question

    Hey, Thanks thats sounds very simple, I would sure like to try a different caliber What would be a good price for something like the 5.45x39 upper and is the ammo close to the same price as 556.
  24. :screwy:I am new to the AR world and this is my ? I hear a lot of talk about changing to a driffernt caliber, what is the process, do I just need to purchase some parts or the intire upper, I now have a S&W M&P 556/223 what other caliber can I covert to Thanks

TRADING POST NOTICE

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions.

TGO makes no claims, guarantees or assurances regarding any such transactions.

THE FINE PRINT

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

TNGunOwners.com (TGO) is not a lobbying organization and has no affiliation with any lobbying organizations.  Beware of scammers using the Tennessee Gun Owners name, purporting to be Pro-2A lobbying organizations!

×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines
 
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.