Search the Community

Sig P229 Elite Dark Tactical, Threaded Barrel - $650 Great gun, been in the safe and don't bring out of the case so putting it up for sale. The new P229® Elite Dark is the newest edition to the P229 Elite and features an ergonomic beavertail grip, front cocking serrations, front strap checkering, SIGLITE® Adjustable Combat Night Sights, custom aluminum grips (May differ from image shown) and the new Short Reset Trigger or SRT. SIG engineers designed the SRT to provide you the same great safety and smooth action of the SIG DA/SA with a comfortable reset that is 60% shorter for faster trigger return and surgical control during high speed shooting. Item Number: E29R-9-DSE Caliber: 9mm Action Type: DA/SA Trigger Pull DA: 10.0 lbs Trigger Pull SA: 4.4 lbs Overall Length: 7.6 in Overall Height: 5.4 in Overall Width: 1.5 in Barrel Length: 3.9 in Sight Radius: 5.7 in Weight w/Mag: 32.0 oz Mag Capacity: 13 Rounds Sights: Adjustable Combat Night Sights Grips: Aluminum Grips Frame Finish: Black Hard Anodize Slide Finish: Nitron® Accessory Rail: Yes Features: Accessory Rail SRT™ – Short Reset Trigger

Absolutely mint Shot Once at the range. Mint with two mags that have TT Base Plates. case and all paperwork. $1799 new and hard to come by $1200

Boy it’s been many many months since I posted anything here, seems like life is moving way faster than I’d like it to. I’m not keeping up very well. bbl length: 7.5 grips: factory rubber Anyway- I am prepared to part company with one, and maybe two BFRs I own. These were acquired new by me about 3 years back. Each were unboxed, inspected, cleaned, test fired with about 100 rounds each of hand cast 158g SWC (357 cases) over some Green Dot as a break in. I DONT shoot jacketed bullets but when I do, I hate myself. I have several BFRs and there are some that are heirlooms in the making for my kids. I love the platform……. But a hot rod needs some parts and this pair of revolvers are the most underutilized kids in the crib. These shot very well, perfectly. They were cleaned and the boxed. And there they have sat for 3 years. In the mean time, I have taken on several hot rod projects. I don’t own land, shooting on my work schedule is prohibitive at best. My shooting since moving here to TN has taken a nose dive to zero. I am rapidly losing an interest that spans over 50 years. But the hot rods can be worked on at all hours and I don’t need land. So…. Until I can move to the country and enjoy the outdoors I have surrounding me….. small block fords it is. Not a matched pair. My timing for acquisition was when the world had no BFRs. They came from separate vendors in other states. I wore a mask when I filled out my 4473s if that is any indicator as to the condition of the world. They are alike, but not by serial. I buy things in twos, I have but two sons and my stuff is theirs when I crap out. This precludes arguments over dads crap! They will have to buy their own 357 BFRs this time. I’ll post pics on Friday night. They will be good pics. Included with either or both, as it might go, will be factory replacement sights still in the shipping packages from MRI (front posts) which are shorter for shooting lower velocity cast. After that initial shoot, I called MRI and hounded them for front posts. I believe they have 3 heights. The tallest is what they come from factory with. My 44 is similar, very tall front, but I send 310s at Uber full monte and the sights are perfect. If the replacements are still too tall, maybe your as nuts as I and would shoot 148WCs at 780 fps, you can always call and they will send out free “next size” posts. Granted I shoot 357 maximum cast, 210gr at 1600 fps from a 10 inch barrel on other guns—-I am not timid nor is the BFR…—— but these guns were to not see ferocious magnums digested all the time. Their throats, timing, lockup, pull are all perfect for a stout heavy for caliber cast thumper but also for casual target loads. At 1000 fps the 158s land a bit below a 2 inch bull. Sights are regulated for a jacketed 125-158 gr thumper. I would have preferred 2 inch high at 25 yards and that makes 100 yard rabbit hits calculable. Of course box, docs, tags, scope mounts, etc as were shipped from MRI are all included with each. Buy one- $1100.00 Buy both- $2100.00 thats a very fair price considering the current market rate, acquisition cost reduction, SALES TAX!!!!, shipping, etc. TN HCP and a bill of sale will be required. I won’t drive a mile at that price but if you cover my fuel, I’ll go as far as two hours from Memphis. Now if you have a 4R70 or an AODE or E4OD with pattern for 302w/5.0, and it’s DEAD (junk/broken/destroyed), I need the case to section the bellhousing off for use on an engine run stand. Common cars you may have with parts to fill my needs: 1988-1996 ish v8 F150, Automatic v8 Mustangs from 88-94 ish, and the ever present, 96.5-2001 Explorer/Mountaineer 5.0 models. There are many others but those are the most likely candidates. As long as the bolt flange for block and starter are intact, it will be fine!! $50.00 reduction if you have such a junker case or trans for me. I can’t use any others, No C4, T5, Top Loader, etc. Lastly: I’ll trade both revolvers and add boot as needed for a Jerico DR4-4 (that’s the latest version 4) “clutch assisted” trans with a ford input shaft. Gear set doesn’t matter, I’ll have to re-gear regardless. And I’d be after a Long Shifter or Hurst V gate (inline shifters only). I know it’s a stretch but unless I ask, I’ll never know.

For sale is a complete (minus stock) Rainier Arms ambidextrous lower. It currently does not have an ambi safety installed. Geissele g2 trigger. VLTOR A5 buffer setup. Assembled by Rainier Arms. $450 Rainier Arms upper with 18” stainless barrel and rifle length gas system. Rainier BCG. AAC muzzle device. No charging handle. No hand guard. $550. This was an accurate and very soft shooting rifle Face to face in middle TN will need to see DL and carry permit. Both of these have less than 200 rounds on them.

Selling my Sig P228. has 2 mags and a Sig Sauer box. The sides have some holster wear, though the bore is good and the gun shoots great $750 in the Tri Cities area

Marlin camp. 9 wood stock has a cheap red dot on it front sight has been removed but I have it has two thirty round mags and a twenty round as well. Gun shoots as it should ran one mag thru no problem Mag well has some discoloration tried to get in pictures 525.00 west Knoxville Maryville area

Like new in box q4 steel frame non optic model. *reduced* 950.00 Closed

Sold

I have a new still in the box Henry Long Ranger Express. It is 223/556, has top rail, threaded barrel and comes with two extra magazines. I am asking $1500 and pretty firm on that. Thanks for looking

Astra Constable in .380 Its in nice condition and comes with one magazine. I'd prefer cash but am interested in interesting trades. Located in West Nashville

This has been my EDC for a while now but ready for something new. It'll come with an extra 14 round magazine and only have honest wear. 750.00

Benelli M4 12g excellent condition $1650 .. now $1600 Maryville Area meet only please

Davis Model p 32. In good shape. 1 mag. Meet in west knoxville or maryville I bought it for boat. But selling boat 160 $ pm for details thanks

SOLD

• Smith and Wesson M&P Shield 9mm 1.0 - worth about $300 used on its own • T.Rex sidecar 1.0 holster - similar holster costs $100 • Lots of magazines: - 4x OEM: 7,8,8,8 round - 3x aftermarket: 9,9,10 round • extra iwb mag carrier from T.Rex Arms Sidecar 2.0 but can be used separately with included belt clip I love this pistol but I’m saving for another item. It’s been especially handy for summer because the grip is NOT obnoxiously similar to sandpaper like some other guns are! I’m willing to consider trades if they make sense for me. Feel free to make offers in DMs. Franklin or Spring Hill.

New Kriss Vector Gen 2 9mm FDE. $1500 cash firm no trades Maryville meet

It has a 26" barrel chambered in 308 kevlar stock, harris bipod. It has 100 rounds thru it. The scope does not come with it. Price 1150.00. Rifle is sold

Super gorgeous, super rare 1951 Browning hi power with TANGENT SIGHTS AND THE SLOT FOR THE RIFLE ADAPTER. You don't find many of these laying around in this condition. $2300.00

Have a good tac driver of an ar for sale, title kinda says it all but spikes lower, cmmg lower parts kit, moe stock with psa upper and fn barrel. Fortis hand guard and red dot asking 750$ text me 305 878 0350

Vepr 12 .. fixed stock, comes with 2 mags. $1100 maryville

I am near memphis. Prefer hcp holder, tn resident only. peacemaker 22 no box $500 remington 1100 12ga no rib, some surface rust $500 pics coming

I have an XCR-L with low round count and in great condition. If you haven't looked into these they are extremely well built rifles with a history in the SCAR program. The rifle runs beautifully and comes with 2 mags. Only selling to make room in the safe because the wife said so :). Asking $1400.

Nighthawk T3 40 cal., second owner, good condition. $2300

Palmetto State Freedom rifle with 16 inch stainless barrel. - Excellent condition... $925 - Tight lockup, Magpul furniture, Raptor charging handle - Primary Arms 3x ACSS scope with FlashKill Can meet in middle TN around Spring Hill, Fairview, Dickson Please PM any questions Smoky