Search the Community

DP12 Shotgun by Standard new in the box. $1200.00 obo

$100 - two - Ruger factory sealed, Blued steel, 30-round, .223 Rem. caliber magazine for Mini-14. FTF or $12 shipping Cleaning out the safe, no trades needed please. location: Smyrna, TN come get it them anytime after 5pm, give me a PM for directions Sorry, I'm not driving to meet anywhere except for the Smyrna Police station. Too many instances so I'm keeping it safe and legit for all parties. Thanks,

Up for sale is a Winchester Model 1894 Saddle Ring Carbine chambered in 30 WCF (30-30) made in 1911. It is close to, but not all completely original. This one was pretty rough when I started. When I work on an old rifle, I don’t want to make it “new”, just clean and functional. It’s not a collector’s piece, but it is now a really nice historic old shooter. The rifle has been completely disassembled, cleaned and put back together. There was little (if any) original bluing left on the metal. I did not try to make the metal look new, but I cleaned it up and gave it a vintage look with cold bluing. The original gum-wood stock was in pretty rough shape and had, at some point in the rifle’s 113-year life, been refinished and sanded a bit too much. The original gum-wood forend was also sanded and bit too much and is split at the front. I cleaned them up as best I could, but they were still just to ugly. I replaced them with a reproduction set from Gunville.com in American Black Walnut. After hand fitting the new furniture, it was finished with a hand rubbed oil finish. The original stock and forend will be included. The saddle ring is also not original to the rifle but I believe it is an old piece. It also now has the correct v-notched ladder rear carbine sight. $950, OBO. Located in Nashville. For sale/trade to persons who can legally own a firearm. Trade I’m interested in is a Marlin GBL or Trapper in 45-70 with a threaded barrel. I’ll add scratch as needed. I can send more (and higher resolution) photos (including some before photos) upon request.

Selling my very lightly used Benelli R1 .30-06 with a Leupold VX-II 3-9x50mm

Loose pack for bulk storage in an ammo can with fresh seals. $625.

Realized yellow is just not doing it for me. Practically new Doxa Divingstar Sub 200 on bracelet, 3 weeks old. Has the balance of the warranty left. Running at +1spd $875 in Nashville area.

Browning Hi Power 9mm with original box. $1200 shipped to your FFL. FTF would require a local FFL transfer.

Up for sale is my Browning Buckmark Buck Lite with added tactical solutions rear sight optic rail, original rear sight, Burris tactical first strike optic, and original box. Price is $650 obo. Must pickup in Lebanon, TN or I can ship to your FFL for $30 extra. Must have valid TN Concealed Carry or transfer through FFL. Thanks!

This is the new limited edition color combo m&p metal SPEC with the threaded compensator, 4 mags, karambit knife and suitcase. Under 100 rnds fired. Comes with holosun 407c green x2. Located in Mt Julet. 1200 with optic for 1000 without the optic.

..

For sale only. No trades. A pair of Remington 870s. These were police trade-ins that I bought back in January to stuff in closets or the truck. But then later that day I had to resign from my job and I haven't been making as much money as I was last year, so my poor timing means these guys should find new homes. I haven't put any rounds through them. They're police trade-ins so they have rack wear but they don't make the Remmy 870s like this anymore. Actions are solid and there are no defects, just cosmetic flaws. 1) Remington 870 Wingmaster with wooden furniture. 2) Remington 870 Police Magnum with synthetic furniture and magazine tube extension. $460 a piece or both for $800. I'll include some defensive shells if you want them. Must be a legal adult resident of TN with a valid photo ID and in good standing. TN HCP preferred. Located in Spring Hill. I don't travel much. Call/Text 615-300-3074 or message me through here. Pics are too large to upload (or so this website is telling me). I'm sorry. Shoot me a text and I'll send them to you.

Inglis Canadian High Power mK.1*. tangent rear sight, shoulder stock cut, matching numbers. 9mm. Very good condition. $1500, no trades at this time. Must be able to sign bill of sale with proper TN. I.D. Nashville area.

This is a complete slide assembly from a Ruger P89 in 9mm. It comes with the stainless steel slide , the barrel , recoil spring , and guide rod. It is all stainless steel and in like new shape. This is a "de-cock only" slide which allows you to de-cock the gun and let the hammer down and the de-cock lever will spring back up to be ready to shoot again. I'm getting rid of parts that I don't use or need. $75 . I am in Clarksville . I can ship it for $10 more. I don't use electronic money so I ask for a US Postal Money Order. Thanks for looking.

I have 1000 rounds for sale, purchased late fall of last year. $600 for all Located in Crossville, TN

I have a Stoeger M3000 Freedom for sale. Takes 3 inch shells It has an 18.5 barrel 7 round capacity from factory with a MOA Precision 2 shot end cap for a total of 9 rounds. Ghost ring sights Magpul stock with MOA Precision stock adapter. Located in Oak Ridge Not looking for trades at this time. Asking $650 obo. 425-243-4568

Custom fitted, black walnut grips. Maybe shot 200 rounds. Comes with everything from the factory plus a good quality, leather, cowboy style holster. I bought it for bear protection when I bowhunted out west, but I no longer have a use for it. I'll throw in all the 300gr, hardcast handloads I have plus whatever spare brass I can scrounge up. I also have an Alaris Tactical chest holster I'd part with for an extra $50 to the buyer. $700 firm (I don't do haggling. I list for the lowest I'll accept.) No trades. Can meet anywhere between Winchester & Murfreesboro.

This one hurts to post, but if I'm honest with myself, I've sat & stared at it for 2 years now. It's just too damn pretty for me to hunt with & I know I'm going to spend more time worrying about it getting scratched than I actually would hunting. I built this up from parts. The action is a Sears model 52, which is the Sears specific brand Winchester Model 70. I had the entire action blueprinted & rebarreled to 6.5x55 Swede by E.R. Shaw. The barrel is 21", 5R rifled with a 1:8 twist. The profile was turned to match the factory M70 barrel which is basically a medium/light Sporter. The barreled action was then mirror polished & sent to a specialist refinisher in Wyoming for bluing. Along with that, the hinged bottom metal, bolt shroud, trigger, grip cap, scope mounts, sling swivels & all screws & fasteners were sent for color case hardening. While all the metal was away for finishing, I found an unfinished, Exhibition grade walnut stock & set about hand fitting & finishing. I hand sanded everything to 800 grit & applied 24 coats of Alkanet oil, wet sanding the first 12. Once the color I wanted was achieved I applied 32 very fine coats of polymerized Tung oil (over a period of about 4 months) The stock was then sent to Ahlmans for hand cut checkering in a 22tpi Winchester point pattern. Once finished, the checkering was then very lightly oiled. Once it was all back here & together, I added a Leupold FX-3 6x42 scope. I've taken it to range 1 time to zero & work out a load & that's literally it. I don't think I've fired 40 shots since I finished it. The whole project was a labor of love, because I wanted an Heirloom Quality gun, only to find out that I'm far better served with working guns. I don't know how many hours went into the build, but I'm pretty sure I clocked over 100 just in the stock. Since then, it's literally sat in the cabinet slathered in anti-rust. I've occasionally taken it out to look at & fondle. It's a crying shame to just have it sitting & it needs to go to someone who'll actually use & appreciate it for what it is, rather than just being a decoration. I'm not gonna lie, I'm pricing this at slightly less than I have in it, but not much & the price is NOT negotiable. I paid nearly half the cost just for the stock alone. $2000 will buy it & if it doesn't sell for that, it can stay in the cabinet. I'm only selling her now to fund a used Harley purchase (unless someone wants to part trade me for a ratty big twin.....) Link to photo album....... https://imgur.com/gallery/LrNFN1l

I am selling my Springfields to build on my CZ and Sig collection. The pistol is in very good condition with very few rounds fired. Maybe 75 total. PRICE = $375 Three (3) six-round mags - nylon case The handgun is located in Lebanon, TN, 37087. Acceptable forms of payment include cash (if sold locally), bank cashier check, or USPS money order. Local buyers will be asked to complete a TN Firearms Bill of Sale and present a valid TN driver's license or TN Handgun Carry Permit to show proof of being the age of 21 years or older. If asked to ship the item, I only ship to an FFL dealer at an additional charge of $45. It is the buyer's responsibility to have the FFL dealer send the seller a copy of the FFL license, so the shipment can comply with applicable regulations. I am a private seller and not a firearm dealer.

I am selling my Springfield pistols to build on my Sig and CZ collection. The XDM Compact is in very good condition and includes the following. Three (3) 10-round mags One (1) 15-round mag Nylon case The handgun is located in Lebanon, TN, 37087. Acceptable forms of payment include cash (if sold locally), bank cashier check, or USPS money order. Local buyers will be asked to complete a TN Firearms Bill of Sale and present a valid TN driver's license or TN Handgun Carry Permit to show proof of being the age of 21 years or older. If asked to ship the item, I only ship to an FFL dealer at an additional charge of $45. It is the buyer's responsibility to have the FFL dealer send the seller a copy of the FFL license so that the shipment can comply with applicable regulations. I am a private seller and not a firearm dealer.

I purchased this gun a few years ago on gunbroker (you may remember about my gamble on the cheapest citori on gunbroker). Well the gamble paid off, and the gun is very nice but per the usual it is collecting dust. I was going to throw it back on gunbroker for a $1.00 bid auction but don't want to jump through the hoops to get the account eligable to sell again. I figure I will post it up here and see if I can't get lucky with a local sale. This turns out to be a 1978 Browning Citori Field 12G O/U, it has the model code J53 which from what I researched means that it is a standard field but was originally part of a large lot of guns sold to a type of supermarket chain or hardware store chain (i.e. Sears gets a model code J53 for their store resell guns). The gun has a top barrel that is modified and a bottom barrel that is improved cylinder, both barrels are clean as a whistle. The action is smooth and firm but not tight, really feals like it is just worn in right, my new Citori is still tight and it is much harder on a day of shooting, though I'm hoping to use it more with one less shotgun and get it loosened up. I also was able to aquire this case from another member on here in a trade. I believe I traded a PMR 30 for the case and some cash if my memory serves. This case is an older Browning Superposed case according to the member I traded for. I tried to use it for my new Citori CX White but with the 30" barrels, and external chokes, it doesn't fit. With internal chokes it barely fits, so I figure this case is a much better match for the correct era citori instead and have packaged them together. I'd love to get $1,500.00 for the shotgun and case but am open to offers. Trade interests: Benelli semi auto self defence shotgun, 28G o/u's, will consider anything 9mm, 12G, .22LR, .22Mag, .308 but don't get offended if I'm not interested as I'm a little particular with my interests. More info and pictures on next comment on this thread below

Used VZ 2008 Bonesteel handguard set FAB Pistol Grip FAB Folding Stock Ambi enhanced magazine release Enhanced bolt catch/release Six magazines and original pouch Original furniture and FAB handguard $1000 I would prefer FTF at an FFL around the Knoxville area, but shipping can be worked out.

Romanian Sar 2 Ak74. Great rifle, $1000. Can meet in Franklin or Erin Area.

Plainfield Machine 30 cal. M1 Carbine, Dunnellen, NJ - $800 OBO Chattanooga, TN Has Rockola Slide and Trigger Housing Plenty more pics or can FaceTime video to see them. Must be legal to purchase/own firearm. Prefer to meet near Chattanooga, TN. Have others as well.

Never carried or used new in box $150 located near Opry Mills mall