Search the Community
Showing results for tags 'trading post'.
-
I have a used LMT MRP 14.5 p/w 5.56 Barrel that I just removed from an upper I purchased. I am going a different direction with the upper and don’t need barrel. Original owner stated apx 2k rds through it. It looks correct or even less. Has a pinned and welded Battle Comp on it that looks like it would be easy to remove if you wanted to go that route. $300 face to face around Murfreesboro or will ship.
-
For sale, mid 50s Springfield production M1 rifle. Very nice condition. Looks to be original condition with all Springfield parts with exception of the H&R trigger housing. I have had several M1s over the past 40 years and this one is the nicest one off all. Comes with 48 rounds of G.I. Greek on M1 enbloc clips. $1650. Sold to qualified Tennessee residents or C&R FFLs.
-
Aimpoint 9000sc for sale. Comes with rings. Mounted but never used. $400 not interested in trades at this time. Text 615-556-9696 for pictures. Murfreesboro area.
-
LMT MRP 10” 5.56 DI upper. Started as a 10.5 then was cut down to 10” to be flush with handguard by DWilson manufacturing. Lantac enhanced Nickle Boron BCG. BCM mod 3x3 charging handle. Dead Air Keymo Flash hider. Shoots great. Very accurate and soft shooting. $1400 for everything or $1100 without Bolt Carrier Group and Charging handle. Also have a spare lower built into a pistol and can sell/trade as full gun also. Possible full or partial trades. Trades: full or partial + $ Q sugar weasel, Tavor, Aug, Krink, usp9 compact, beretta M9, browning hipower.
-
Mint condition fired once for zero of optic. Come with everything scene. Grip work was done by Defiant Machine Works.
-
Glock 23C up for sale. The last of my 40 S&W pistols. Great condition. New Trijicon HD night sights. All extended controls. Will come with everything a new one does. Will have 2-13 round mags, 1-22 round mag, and a ETS mag I got at a pawn shop and have never used and am unsure of capacity. My guess would be 25-28ish. Has a 9mm conversion barrel from Zev with 2 Magpul 17 round pmags. Included 1000 lumen TLR-1 HL light. Really a great shooter and in great shape. I bought this in a 40s&w phase a few years ago. My guess is less than 500 or so rounds fired. Ammo up to 1000 rounds of FMJ and 250 rounds of defensive (Gold Dot/Critical defense) ammo available for purchase also. Trades considered. 9mm Glocks, AR 15/10 platform pistols and rifles, P320 9mm, .223/5.56,9mm, 7.62x51/.308 ammo tops trade interest but Open to trades that peak interest.
-
Putting together a new thread for this. Hard to find in original condition . Ruger blackhawk 41 magnum new in box. Never fired, model does not have transfer bar safety and was never sent it to get it done. Meaning this model is untouched and unfired. Still has the factory paperwork in the box. 40 series serial number dates it between '72-'73. Located in Mt Juliet. Asking 1400. Price reflects condition. Thanks for looking!
-
Come to the decision to sell off my 40 S&W pistols. The Glock 27 is my favorite of them. Small enough to conceal easily. It is NOT IMO one of the feminine single stack offerings from Glock. Still has a man round. Naturally subsonic. Will come with everything a new one does. All controls are extended. New night sites within the last 6 months. Both factory mags have +1 extensions so you can get a grip. Will include 1-13 round mag and 1-15 round mag. All Glock branded mags. 500.00 firm. Ammo up to 1000 rounds of FMJ and 250 rounds of defensive (Gold Dot/Critical defense) ammo available for purchase also. Trades considered. 9mm Glocks, AR 15/10 platform pistols and rifles, P320 9mm, .223/5.56,9mm, 7.62x51/.308 ammo tops trade interest but Open
-
Most of brass have been wet tumbled. Mixed 5.56. Meet in Columbia or at Cracker Barrel on the corner of Harding and Sidco depending on the day.
-
ad closed Three knives lookin' for a new home...
Grand Torino posted a topic in Non Firearm Classifieds
All come with combo kydex/leather sheath shown. Price is $115 each shipped. 1. Sold to Darrell 1/8" thick 440C stainless with a total length of about 11" and the blade right at 5 1/2". This is a small and slender Bowie with SS guard and accent. The handle is cocobolo and Surinam ebony. 2. Sold to RED333 This is also a small and slender Bowie made from 1/8" thick 1084 carbon steel. It is 10 3/4" long and the blade is right at 5 1/2". The guard is brass and the handle is antigued ash. 3. Sold to Snaveba This is made from 1/8" thick 1084 carbon steel. It's 10 3/4" long with a blade of 5 1/4". The guard is SS and the handle is gabon ebony with G10 and cocobolo accents. -
Selling my New in Box SCCY CPX-2 Gen 3 9mm pistol. Flat Dark Earth color. Comes with all original documentation. Two mags. FEATURES SCCY's CPX-2 Gen 3 is designed for concealed carry but large enough to get a good firm grip. It is considered to be one of the best priced, precision made in USA Pocket Pistols on the market. Chambered for 9mm, it has a 3.1 in. barrel with a 16:1 in. right hand twist. The slide is machined from stainless steel and features a new, attractive, square design. This DAO has an internal hammer with inertial firing pin to prevent accidental discharge. It has a smooth, consistent 9-pound trigger pull. It comes with two 10-round magazines with finger extensions bases installed and two flat magazine bases. Gen 3 additional features include the removal of the finger groves, picatinny rail mount, metal trigger, and the new Roebuck Quadlock design. Not interested in any trades. Local pick up in Clarksville only. No shipping. Buyer must be at least 21 years of age with valid Tennessee or military ID. Buyer must sign a Bill of Sale. If the listing is still active, the pistol is still available.
-
Took these of my wife’s Tahoe, still got a lot of life in them.1 tire has a little more tread than the others , we cut one on the sidewall and had to buy a new one. $100 or trade for ammo reloading stuff or ???
-
Found a car, thanks!
-
Up for consideration- A lightly loved Kahr P380. Stainless-Night sights. - 2 standard capacity and 1 extended capacity magazines- leather holster- Hogue over grip rubber gripper. Asking $450.00 OBO out the door. Meet in Fairview with TN Carry Permit flash-required. Must be legally able to buy/own firearms. Perfer established TGO brethren. Thanks for looking.
-
Up for consideration- A like new/ never used . PHROBIS III, AR/M16A2 bayonet / sheathe and original owners booklet. These are selling at high prices on GB and other sites. Asking- $300.00 FTF Fairview. $310.00 shipped. Trades- high quality Red dot. Thanks for looking.
-
I have a used but like new Nighthawk TRS. It's had about 500 rounds fired thru it and it's just been sitting in my safe. Listed below are the details from Nighthawk. I've had Nighthawk fit a toolless guide-rod, and the original guide rod will come with it. $4,000 Black nitride finish, Double stack commander frame and 4.25" barrel, Hand fit frame and slide, Hand fit match grade 9mm barrel, Throated barrel, Polished feed ramp, Dimpled cocking serrations, Hand blended grip safety, Heinie Ledge Straight Eight rear sight, Tritium front sight, Tuned and polished extractor, Hand fit firing pin stop, Lightweight aluminum Nighthawk Custom flat trigger, Hand polished ignition components, Custom trigger job set with 3.5 to 3.75 pound trigger, Completely dehorned for comfortable carry, Hand beveled edges, Ultra Hi-Cut Front Strap, Includes two 17-round magazines I'm located in the Nashville/Clarksville area
-
For sale Cold steel code4 drop point 70.00
-
Thinning the herd on my favorite platform. Setup #1 Combat Armory G19 Frame, Arc Division Reactor19 chunk port slide and barrel, Trijicon SRO with ranger wrap, Surefire X300U, Night Fision sights, Standard CO. trigger, extended controls, Taran Tactical magwell ect... $1350 complete $850 no light or SRO Setup #2 SCT19 Frame and magwell, Zev Custom Enhanced Socom slide (rare) ,Rouge Gun Works QL Compensator (w/barrel),Standard CO. trigger, Trijicon SRO with ranger wrap, Surefire X300U ect... $1300 Complete $850 no light or SRO Setup #3 Combat Armory G19 Frame, Surefire X300 light, P80 slide, Zaffiri Precision barrel, Trijicon RMR Type 2, Cowitness Suppressor sights, Johnny Glock drop in trigger with his adjustable OEM flat face trigger shoe, extended controls ect... $850 Complete $400 no light or SRO Must be willing to meet within 30 miles of Jefferson City. Have more pictures of the setups if interested.
-
Moving off a bunch of duplicate setups. Glock 19 Gen 3 , Johnny glock drop in trigger with Vex trigger shoe, Killer innovations Velocity V1 Slide just refinished by Whitetail Tactical in Alabama, Agency Mid Line Threaded Barrel, Arms republic Compensator, Holosun 407 Green dot, Suppressor height sights, Extended controls ect.. $900 obo SCT Manufacturing SCT19 frame (g19 gen 3 platform), Custom Black Multicam cerakote on frame and slide by Whitetail Tactical in Alabama, Ported slide/ matching barrel, Johnny Glock drop in trigger with a Standard CO. Trigger shoe, Holosun 407 Green Dot), Suppressor height Night sights, Magwell, extended controls ect... $750 obo Must meet in person within 30 miles of Jefferson City. CCP a plus. If you want more pics ect. let me know.
-
Zev Oz9 Hypercomp has 150 rounds through it. I bought it new with the trijicon RMR Type 2 and the Surefire X300U light on it from Omaha Outdoors for $2600. https://www.omahaoutdoors.com/zev-oz9-hypercomp-x-grip-rm06-x300u-a/ First $2200 takes it complete $1500 no red dot or light Must meet in Jefferson City area or within 30 miles. CCP a plus.
-
I am selling a used digital link for the ProChrono. $18 shipped Face to Face: Arlington, Eads, Oakland just east of Memphis. to ship pay with Zelle or venmo trade for a forward assist kit, JP yellow springs or KAW Valley blue trigger springs plus a couple bucks
-
Box of 10 7.62x39 ak mags. They may require minor filing to get them to fit properly depending on what variant you have. $100
-
M44 Mosin Nagant stock for sale or trade. Unfortunately, the prior owner put a recoil pad on it and lost the butt plate. No hand guard. This has the cut out for the M44/type 53 folding bayonet, but this can be used on an M38 or M91/59 Carbine as well. This piece is in good condition with some finish wear, and it’s a solid replacement for your carbine with a cracked stock, or to un-bubba that mossin nugget carbine that was used as a sniper rifle in the battle of Berlin that you got for cheap at the gun show. Asking $80, or trade for 7.5 Swiss or 8mm Lebel ammo. Maryville, west Knox, or Lenoir city meet.
-
Cold steel large Voyager drop point new 55 bucks if we meet plus shipping if I need to ship it thank you for looking
-
Hello, I've had this in storage for a few years and just don't use it anymore. Great accessory to have when you need to clean long parts or multiple parts at once. I don't remember what I paid for it, but here's a link to a similar model: https://www.brownells.com/tools-cleaning/gun-cleaning/ultrasonic-gun-cleaners/turbo-sonic-power-professional-ultrasonic-cleaner/ Price drop $1,000OBO
