Jump to content

Jasongar8

Member
  • Posts

    2,484
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by Jasongar8

  1. Are you sure its not a AOW? If its just got the pistol grip and no stock its most likely an AOW, it know that ETS made quite a few of these. The guns are great my brother has one, the guy who ran ETS not so good.... -Jason G
  2. They might have been in the Metro Academy, I know they dress in BDU's or 5.11's while they are going threw it. But Metro does not carry Glock 21's they carry Glock 22's. And they only have a couple guns approved for backup, the kel-tec P3AT, and S&W .38 revolvers I know for sure. -Jason G
  3. BINGO, this is exactly right. -Jason G
  4. Can you shoot .50 BMG out there? -Jason G
  5. These have been around since 1968 and have been deployed with the Navy SEALs, Marine Force Recon, and the Army 5th Special Forces Group. The exact number made is unknown but thought to be less than 50, claims have been made that there were as low as 16 built. There are two on display, one in the UDT/SEAL museum at Fort Pierce, FL and another in the War Remnants Museum in Vietnam. Production began in July 2007 for 500 more new units for US Military forces but as of 2009 none have been delievered. A very interesting weapon. As much cool stuff as Joe has I dont think he will be able to put his hands on one of these just yet. -Jason G
  6. Glad you finally found one Paletiger. What color did you end up going with? -Jason G
  7. One post and you are already calling someone an "a" hole? I can tell you have an agenda.... -Jason G
  8. I bought a tan frame FNP-45 a few weeks ago. I have small hands and it feels good in them, I think the Glock 20/21 is too big for my hands but the FN fits them pretty good. I love the 15+1 capacity. I havent shot it yet but hope to on Sunday. My friend bought a FNP-45 just like mine the day after i did and he says that it is VERY accurate. Also Ameriglo is making night sites for the FNP-45, they should start shipping within a month. Bladetech makes a holster for them also. -Jason G
  9. You and your friends are in my thoughts and prayers. -Jason G
  10. Jasongar8

    MPA10

    Yea thats about it. I have seen the old MAC brand sound suppressors that were used for about $150-$200, these were up at Knob Creek earlier in the month. Since the barrel is the same thread they would work on your gun, but you have to give the Govt $200 for the transfer. -Jason G
  11. Was anything thing wrong with your Ceiner kit? Or is your problem just with J. Ceiner? Granted he is an ass and a bad business man but he makes a kit that will run, at least the ones Ive been around and have used did. -Jason G
  12. Jasongar8

    MPA10

    Opps, my bad it sure does look like the 9mm in the pic. Looks a lot thinnner then the ones we have in the shop. I guess you have to have them side by side to really tell. Is that one threaded? Sorry bout the confusion. -Jason G
  13. Jasongar8

    MPA10

    No "MAC 10" accessories will not fit it. The "MAC 10" was/is chambered in .45 and is a larger frame. The gun you have is a copy of the Cobray/SWD M11-Nine. Masterpiece makes very nice copies compaired to the other clones that are out there. They are actually made in the same factory in GA where the Cobray/SWD sub-machine guns were made at in the 1980's. -Jason G
  14. Actually 14k-16k is right. A MP5a2 or MP5a3 can be had for 15k all day long. MP5K for 18k-19k. And an MP5SD for 19k-20k. Subguns - Machine Gun Price Guide -Jason G
  15. I bought a Ceiner .22 kit last October because I could see what was comming and boy am I glad I did. With 5.56 prices so high if I didnt have the .22 kit I wouldnt be shooting my AR's period. .50 cents everytime you pull the trigger is too expensive to shoot very much. -Jason G
  16. Check out a Kahr PM9. Very small and lightweight and seems to meet your requirements. -Jason G
  17. Have you ever been in this EXACT situation? If not the you DONT know what you would do. Until you have been there and done it, none of us know what we would do. It is dangerous thinking to become complacent and think you know exactly you would do in any given situation, keep training for any and all situations. -Jason G
  18. Right now not shooting any .308, .50 BMG at all. Shooting very little .223/5.56. I bought a .22 Ciener kit for my AR's so thats about the only time I shoot my AR's very much. Still shooting 9mm and .45 quite a bit. Not shooting .38 because it seems it is getting harder to find. I dont own a .380 but if i did you couldnt pay me to shoot it. -Jason G
  19. When people ask me, "why is this so high" or "man that is high" my standard response is, "well i cant make one for that much". Just think about what the mills and CNC machines cost and the maintenence cost plus paying the people with the skills to run them. Then add in the cost of raw material and you will find out why this kind of stuff "cost so much". As far and the long rails, most people gets the long ones for the extended site radius, not to fill up with tacticool stuff. -Jason G
  20. Ive got a PM40 and carry it everyday. I put the pinky extender on the mag but when i shot it the mag kept comming out so I took it off and put the factory one back on. i carry it in a inside the pocket holster everyday and it is great, espically in the summer with shorts on. I dont even know its there iti s so small. They are not fun guns to shoot, being so small they pack quite a punch. A great carry gun but not one you want to take to the range and put 200 round threw every time. -Jason G
  21. It was totally the trash that I expected. It might as well have been a ad for the Brady group. It seemed to me like they think that you are better off with nothing at all to defend yourself then you are with a gun. Im sure it got alot of people who know nothing at all about guns to think, "wow guns really are bad". It really is sad what the liberal media has done to this country. -Jason G
  22. Come on Joe ease up on him, remember not everyone gets to go to the SHOT Show and see all the new tacticool stuff. -Jason G
  23. Nothing to see here guys, this is a recuring theme with Mr. Nick. It seems to me he is just here to "stir the pot" if you will. I wouldnt waste your time with this guy, but if you would like to see more of his "work" and see what he is really about go check out this thread. http://www.tngunowners.com/forums/2nd-amendment-issues/18768-obamahahs-latest-aw-ban-list.html -Jason G
  24. I thought that there were a bunch of security contractors working over thIere patroling the coast. I know that if I had a multi-million dollar ship hauling millions of dollars worth of product you could bet your sweet ass that I would have security contractors working for me. -Jason G
  25. I had that exact same list, i got it from over on subguns a while back but dont know if it is 100% correct. -Jason G

TRADING POST NOTICE

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions.

TGO makes no claims, guarantees or assurances regarding any such transactions.

THE FINE PRINT

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

TNGunOwners.com (TGO) is not a lobbying organization and has no affiliation with any lobbying organizations.  Beware of scammers using the Tennessee Gun Owners name, purporting to be Pro-2A lobbying organizations!

×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines
 
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.