z90HD

I got my shipping sticker in the mail 2 days ago. Boxed it up and shipped it out this morning. Now im standing on pins and needles in hopes that they will honor the warranty.

Dang 6 years ago when the wife and I went to vegas via 2 planes there and 2 planes back I carried explosive gas in my carry on bag and tsa did not even question it.

Yep it happened to me just last week on my Sigma 9mm. Took me about 20 minutes to get it back apart. The recoil spring popped out and had it all jammed up. Put it back together and worked fine.

Much appreciated..Thanks

They could be bringing it in because of this recall. Does it apply to your gun?   http://www.waltherar.../recall-notice/'l No I dont think they are taking it in for this issue, my serial number is lower than their staring number. When this is all over and done with I'll post the details of what happened.

OK Ok I know how most of you feel about the gun auctions but im posting this for the New Members here. Good luck if anyone is going to attend.   http://www.powellauction.com/auctions/firearm

Before I called S&W I did call Walther America and they told me they do not have any parts at all for the PK 380's. Smith was handling all the PK's and that they might have the parts in stock or might not. Then the guy tells me that Walther will be getting control of all parts from S&W for all the Walthers in April and if I wanted to wait  I could call them back then. Well I did not want to wait so I called S&W and now Im waiting on the box they said they were sending me to ship it back to them. Im still curious though as I stated above, I bought it second hand so do I have to worry about them not honoring any warranty work? The guy on the phone did not verify any information if I was the original owner or does their warrany carry on? Thanks everyone for the replies.

Has anyone experienced Walthers customer/repair support? I recently picked up a PK380 second hand. It came with 2 mags full of ammo. I shot 1 mag and it did great. I reloaded the same mag and shot 1 round with a FTE. Cleared it and shot agian with another FTE and so on  etc, etc.  Today I took it to my local gun smith and he said the extractor is worn out and looks as if some one had done some work on it causing it to not reach in far enough to catch the case. So now I call Smith and Wesson and tell them what the pistol is doing, and the dude on the phone says we'll take care of it. He took my mailing information to send me a box to send it to them.. So hence the question, has anyone had to deal with them with a similar situation? I think Walther or Smith offered lifetime warrranty on these pistols but to the first purchaser only. The guy on the phone did not ask any questions so im curious, and I even asked him if this will cost me anything and he said it should'nt. Thanks for any info

Hello and welcome Ted

Welcome to TGO

Welcome to TGO

The wife and I will be there today.

If your interested you would qualify to join the American Legion here in Maryville. Annual dues are $35 a year and to join the range its a $20 or $25 one time fee for life time membership to the outdoor shooting range.

I do appreciate the info. I'll look into it some more and see what I can find.

I had traded some of my labor for a marlin 60 (first firearm I ever owned) and wanted to learn more about what I had so  I just started searching the internet and stumbled onto TGO

I could use a little help. I have an  rg38 spezial  68 model 2 inch barrel made in germany. I know most people consider them to be junk but I have a friend who want to buy if for his daughter for home defense and I would like it to function properly. Here is the problem, the ejector rod works its way out of the cylinder when shooting it. I completely tore down the cylinder and cannot figure what is suppose to hold the ejector rod in place. The front of the ejector rod has a screw slot in it so im wondering if its suppose to thread into the cylinder? I dont see any threads anywhere though.  I have looked at numriches schematic and that really dont show me any fine detail of the parts.  If anyone has any advice i'd appreciate it. Thanks

Word for word, thats the same email I got back as well

Thanks or the info.. I've decided to pass on this one. It's it Fla and It would be too hard to really get a good opinion from the current owner about the internal condition. I will however have to keep the last post in mind as I run across the Helwan's pretty often in the pawn shops.

Update. Turns out its a Helwan with Egytian writing on it. Im not sure yet if its import marked. Im still waiting on pictures and it would help if this was not out of state.. I did some research on the helwan and it seems to be a decent collectable. According to the current owner she says it in excellent or better conditon and is asking $250 obo and shipped for free. What do you all think? I wont have any pics till later in the week.

DONE AND DONE

I thought the same thing, that it was a helwan. The lady was sure it's stamped "german" and "helman".. I guess I'll just have to wait to see it. It wont happent till Feb so I guess in the mean time i'll just keep checking the web for some info. Thanks

Good Day everyone and Merry Christmas, I was at a buddies house yesterday and he was telling me his sister has a german gun for sale in 9mm. I asked what it was,he wasnt sure so he called her.. He put her on speaker phone and she read off the gun "germany" and "Helman".. Its semi auto. I cannot find anything on the internet about it, so I was wondering if any of you long term gun gurus have ever seen or heard of one? She's wanting 250 for it and says there is not a scratch on it. Its just to heavy for her to carry it. Thanks

I did not want to start a new post on this as I know there is another Guard related post somewhere, I just cant find it.. So anyway. The wife and I have been working security now since Oct this year. How long should it take to get our State issued cards? Our last paycheck stub states that our license is due to expire in Jan 2013. I have seen some of the members here work in the security field, so if you have any info I would greatly appreciate it.

[quote name='vujade' timestamp='1355175962' post='858047'] here is a sample of the stuff: [img]http://i45.tinypic.com/n3njpk.jpg[/img] some are pretty bad, some are pretty clean. I plan to go through them tonight and separate the best from the worst. [/quote] Im glad you posted a pic. about a year ago I bought 1000 rounds of wolf ammo at the gun show same caliber. I got it home and opened both boxes and found exactly what you have. Just about every round was rusted. I simply took each one to the bench grinder using the wire wheel and cleaned em right up. I was quite worried about it until about the 10th round and I figured it they have'nt blown up yet im good to go..Once cleaned I just kept them in an ammo can and have not had any rust come back yet..

Welcome Rob