Search the Community

For Sale Only - S&W M&P Shield 9mm; First Generation. No Thumb Safety. Gun is in great condition. Less than 800 rounds. 3X 8-round magazines, 1X 7-round magazine with Pearce Pinky Grip extension; also has flush mount mag base pad. Extra Recoil spring (not shown). Modified blacked-out rear sight, modified front sight with orange photoluminescent paint & clear coat. Ammo not included. Original box with paperwork also available. $400 OBO. Knoxville Area. Prefer TN HCP holder.

Relisting. I sold the heavy Surefire light and swapped it out for Magpul furniture. Much better ergonomics. Location is near Murfreesboro. Please PM me with questions. I don’t respond to “call me” posts/messages. Please be a TN resident and willing to flash ID when we meet. No trades- trying to get the collection down to a specific number. Bought this from another member in December. I rationalized it because the Vang Comp work is worth $800 alone, (that’s a hyperlink) not to mention the 590A1 is no longer being produced. Two range trips, about 50 rounds through it, shoots tight groups, more than reasonable recoil for 00 buck. Vang Comp claims 12” pie plate accuracy at 25 yards with buck. I didn’t get to test that claim, but it does pattern absurdly tight. This was apparently sold as new in this configuration, so it’s a “factory” Vang Comp gun. Original owner said us was a long-time low-use safe queen and I believe he paid around $1600 for it. Upgrades: Vang Comp fully tuned action Vang Comp Stock Vang Comp "back bore barrel process" (modifies to a very tight internal choke without tubes- lengthens the forcing cone) + forward barrel porting for recoil control Front hooded tactical night sight (looks like it takes any AR sight post) Rear ghost ring sight Rear Picatinny optic rail Large dome head safety button Stainless steel tube follower Heavy duty tube spring All steel mag “breacher” (or melee weapon- it’s really sharp) extension tube. 6+1 capacity with Wolf 00, but I suspect it’s 7+1 with slightly shorter shells. It’s sooo close Magpul Furniture Velcro side saddle with 2 saddles $880 FIRM, you come to me (Live rounds not included) That’s lint/dust on the ports in the third picture. No wear.

Selling a very nice HK vp40. I added a threaded Barrel (14.5 x1 lh). No rounds through it. I have original barrel as well. Factory case. Very clean like new. Sell or trade. $800. Two 13 rnd magazines. Threaded Barrel was bought from HK parts. Net. Meet in middle Tn.

Up for your consideration is a Dynamic duo, kind of like Batman and Robin but better.... more like Batman and Batman.... (you pick which two, that debate is for another forum). Two of the finest handguns you can lay hands on, filling both your needs with a SAO and a DA/SA version, both top of the line in their category. First up is a Tactical Sport Orange. Single action, 40 cal, and only 100 rounds through it. I'm not sure what else to say.... SAO perfection.. $1700 2nd on the list but first in many hearts... Shadow 2 Orange. DA/SA goodness chambered in the ever so popular 9mm cartridge. Only 300 rounds through this beauty. If you are not familiar with the S2O it's your CZ Shadow 2 that has been hand fitted at the factory and a 1911 style barrel bushing installed. Think shooting a laser but only more accurate.... $1800 Both guns 100% issue free. I just have the itch to buy something and being that I still haven't hit the lottery one thing must go to purchase the next. Not planning on splitting these up for now so if you are interested in just one of them find a buddy and you can both benefit from the combined savings Have a new project so adding individual prices, will still do the pair option as well. Feel free to PM with any questions. $3000 for the pair, individual prices listed above.

Selling my Glock 19 Gen 4. I'd would like to sell it as a package ( Gun, Mags, Holster) but I am willing to break it up. I would be willing to trade for a Sig P320 series. The Gen 4 has Ameri Glo H Viz sights installed APEX trigger Extended Slide Lock Inforce Glock C light 10 Mags in total 5 x factory mags (15rd) 4 x magpul mags (15rd) 1 x magpul mag (27rd) 1 - BladeTech IWB $700 for the gun, mags and the BladeTech Holster

Like new no box $250 Nashville

Selling my Arsenal 106FR in 5.56 Has a geissele trigger, MOE Grip, Krebs safety, and zentico bolt knob. Gun has been rethreaded for 1/2x28 and a cherry bomb affixed. (Several hundred dollars) All original parts included. 2 new puff mags, several older mags that are on their way out. $1900 Trades: I 'm not looking for PSA AR or a knock off Glock. Glock 9mm, 10mm in partial trade High end MFG's, MP5, HK, Beretta 87 with a threaded barrel is my white buffalo Shipping: can ship but buyer pays shipping costs. 704 989 4008 - shoot a text or call, if I don't pick up please leave a message and I'll get back to you.

Alrighty, I bought this off a member here a few years ago, cleaned her up nice, carried her a bit in my sticky holster, decided to switch it up. We have a pretty minty fresh Springfield Armory ESP 4 in 9mm. It has a single 10 round extended mag and 7... that is 7! extra factory standard magazines (9 round count). That's $210ish retail plus tax just in magazines! Ok, back to the gun. She's nice, all factory stuff, extra magazines, nice little way to avoid uncle sam on a new one as well as get all the extra magazines your heart could desire thrown in! Located in Franklin TN. Firm on price unless you are wanting to take my number off your awesome railed 9mm metal frame pistol or an AR10. Cheers!

Glock 26 Gen 3 for Sale. This has been a great gun. It has gone through a couple a courses but not a huge amount of rounds through it. Glock 26 Gen 3 Hailey Strategic 13 Night Sights Ghost Extended Slide Release Ghost Extended Slide Lock Talon rubber grips Gun comes with a G Code Incog holster and a G Code Mag Pouch 3 X Factory Mags 2 x Magpul Mags $550 for everything

Sold

I bought this from another TGO member. I bought this to use as a hunting pistol. I ended finding a different hunting pistol so this one will not get used. Here is the build list: Aero upper and lower PSA BCG Parallax tactical m-lok rail Seekins bolt release, BAD mag release button, Strike Industries extended takedown pins Ambi 45 degree armaspec safety “Custom” Krylon camo , it is well done if I say so myself (not done by me) SB Tactical SBA4 brace Burris 2-7x32 Scout Scope with a Monstrum 1 piece mount. I will also throw in 2 boxes of hunting ammo. $950 for everything.

Offered here is a used 1858 Pietta Remington clone. I’m the original owner, fired it on one occasion, but you can’t tell. 8 inch barrel, really like new. I’m near Kimbal TN, will travel 25 miles. $250, not interested in any trades. Thank you. NineTwoFive6FourZero1380

For Sale is my Ruger Mark 1, 6 7/8 bbl with factory muzzle brake. This Ruger was manufactured in 1960 and is in excellent condition. The rifling looks new and the trigger pull is just under 3 ibs. It has been meticulously cared for and there isnt very many out there in this condition. Very accurate and reliable. Please contact me with any questions. Priced at 550. John 423-921 4322

So some know I am heavily into 22 Benchrest. I also do most of my own barrel work, etc on my guns. I won a Douglas barrel blank at a match and it isn't what I normally use on my competition guns, so I decided to make a customized 10/22 since I had one laying around. Actually, this has zero Ruger 10/22 parts. The only part I used from the donor gun was the action and it was from a T/C22 which is just a Ruger clone, but I liked it as it had the pic rail built in. Anyway, here is the rest of the story. Receiver was internally threaded to 3/4-16 so that the barrel would mount like my other custom BR actions. I threaded and chambered the .920 Douglas Barrel to fit and chambered it based on being in the 10/22 platform which basically means it has to be a little larger chamber with more taper for feeding. This is still way tighter than a factory chamber, even a Bentz. I purposely did not go too loose as this is built for accuracy and precision which it is does very good at. What this means is that it can be a bit finicky with certain ammo's and feeding. I only use SK or better (Lapua normally) and it runs pretty good. It may take some trial and error to see what ammo you have that it likes. This is a bench gun, not a walking around gun as the barrel is pretty long and heavy. It has a Kidd Bolt, springs, and 3oz/3oz trigger. It also has their rear action mount that creates a second action screw into the stock. The stock has been inletted and bedded to fit. The stock is a Boyd's At-One. The scope on it is not priced with it. Price is $1000. As I got the barrel for free and did all of the work, just the parts are worth more than this. So why am I selling? I'm just not a 10/22 guy. If you like 10/22's and accuracy, this is a pretty good opportunity to pick up something that will outshoot most factory bolt actions with ease. Pickup in Franklin, Columbia, or Murfreesboro areas as I am in between all three. Any questions, just let me know.

Picked this a couple years ago and as usual, my interests are changing. $1400obo. Only trade interests are prelock Smiths. i also have ammo that I will sell with it for .35 per round. knox/Tricities area

Here is a pretty darn nice 1967 (according to oldguns.net) Winchester Model 94 30-30. Made in the USA this is a carbine rifle, lever action, shoots 30-30 cartriges of which I have 4 boxes of that will go along with this one. Will come with a gun sock and the ammo. Pictures tell the story here folks, also have more. Asking $950 for the package, firm on price unless you want to offer more or take $950 off of your awesome railed 9mm pistol with a metal frame or your AR10. Located in Franklin, TN.

Sold

Looking to clear out some I just don’t use. This is a gen 5 45 MOS 9mm with a Burris Fast Fire optic and streamlight tlr-1hl and a matching IWB holster. Has 3 17 round mags and all the accessories. $900 in northern mid TN.

Brand new MPX Midnight Copperhead edition 1-20 rd and 1-30 rd mag. Brand new in box, just decided I want a B&T instead. $2000 Northern mid TN.

SOLD

Ok, this will be long I have a pretty much brand new sig P226 in gray. I have done a lot of upgrades to this gun please see list below Extended base pads Steel magwell Strut and spring kit Adjustable trigger Main set kit Recoil and rod main spring reduction kit Night sights And T1C Holster And of course legion range bag Yes it was all professionally installed and yes I have all factory parts as well. Manufacture date march 2022 With that all being said Price 1325.00 firm Text for faster reply 615-946-9676

Very clean wingmaster 12 guage Modified. Choke. 28 inch barrel Monte Carlo stock. In walnut. Shoots 2-3/4 a few dings on wood stock nothing major gun in. great shape gun born between 68 and 73. Shoots as it should. Very smooth action Note forearm cap has been changed to accept a sling. In Loudon or west Knoxville very clean gun

Mint condition sig p938 extreme 9mm show a little wear nothing bad I am very picky on my guns so probably really nothing but I am honest night sights 3 mags 2 holsters original box 625.00 always open to trades 615-946-9676

Up for sale, very nice Defiant (formally Tanfoglio) stock master 9mm, with holster & mags/w extensions for USPSA carry optics. Bought from patriot defense, they milled for SRO/RMR and did full DA/SA trigger job. Has about 3-4k rounds through it - fantastic shooter, just not interested in playing with the heavy steel frame anymore. Has all factory parts, 2 sets of grips - P.D. aluminum and loks bogies, 4 mags with extensions, few different hammer springs, GX products vice holster, extra grams spring/follower kits. Have over 2k in gun/milling/trigger job, selling all of it minus the SRO for $1500. IMG_7231.MOV