Search the Community
Showing results for tags 'trading post'.
-
SIG SNAKEBITE SE .308/7.62 NATO for sale. 2 stage trigger, ambi mag release and safety. 1 twenty round Pmag . FDE upper and lower receiver. $1600. located in Mount Juliet. Only trades considered would be for WWI,WWII German and American arms.
-
This one hurts to post, but if I'm honest with myself, I've sat & stared at it for 2 years now. It's just too damn pretty for me to hunt with & I know I'm going to spend more time worrying about it getting scratched than I actually would hunting. I built this up from parts. The action is a Sears model 52, which is the Sears specific brand Winchester Model 70. I had the entire action blueprinted & rebarreled to 6.5x55 Swede by E.R. Shaw. The barrel is 21", 5R rifled with a 1:8 twist. The profile was turned to match the factory M70 barrel which is basically a medium/light Sporter. The barreled action was then mirror polished & sent to a specialist refinisher in Wyoming for bluing. Along with that, the hinged bottom metal, bolt shroud, trigger, grip cap, scope mounts, sling swivels & all screws & fasteners were sent for color case hardening. While all the metal was away for finishing, I found an unfinished, Exhibition grade walnut stock & set about hand fitting & finishing. I hand sanded everything to 800 grit & applied 24 coats of Alkanet oil, wet sanding the first 12. Once the color I wanted was achieved I applied 32 very fine coats of polymerized Tung oil (over a period of about 4 months) The stock was then sent to Ahlmans for hand cut checkering in a 22tpi Winchester point pattern. Once finished, the checkering was then very lightly oiled. Once it was all back here & together, I added a Leupold FX-3 6x42 scope. I've taken it to range 1 time to zero & work out a load & that's literally it. I don't think I've fired 40 shots since I finished it. The whole project was a labor of love, because I wanted an Heirloom Quality gun, only to find out that I'm far better served with working guns. I don't know how many hours went into the build, but I'm pretty sure I clocked over 100 just in the stock. Since then, it's literally sat in the cabinet slathered in anti-rust. I've occasionally taken it out to look at & fondle. It's a crying shame to just have it sitting & it needs to go to someone who'll actually use & appreciate it for what it is, rather than just being a decoration. I'm not gonna lie, I'm pricing this at slightly less than I have in it, but not much & the price is NOT negotiable. I paid nearly half the cost just for the stock alone. $2000 will buy it & if it doesn't sell for that, it can stay in the cabinet. I'm only selling her now to fund a used Harley purchase (unless someone wants to part trade me for a ratty big twin.....) Link to photo album....... https://imgur.com/gallery/LrNFN1l
-
Offering up another one I took on trade but will probably never use. Stainless Walther PPK chambered in .380 cap. Comes with 3 mags and factory box. $750 obo.
-
Edit: sold pending meet up Looking to sell my CZ P10c. Had the gun milled out for an RMR by jagerwerks and had suppressor height sights from Dawson precision installed (black out back, fiber optic front. Includes factory case and paperwork, all grip back straps, and 3 additional factory magazines all 15 rounds. Pictures that include RMR are for demonstration only the sale does not include the RDS. Approx 1k rounds through the gun. Looking for $425 cash. Prefer local pick up in Chattanooga if possible. Must be able to present valid TN DL or HCP at time of sale.
-
I have 3 in their original package. Asking $35 each. Only trade would be the compact FN 509 Compact 12 round magazines with a little cash coming towards my end. Located in Oak Ridge but I'll be in Nashville from 4/29 to 5/2.
-
$400 cash in hand looking a used HK VP9 or a P30. Send offers if ya got one you are willing to let go at this price point:-) Located in Nashville, TN.
-
LNIB taken to the range once. Optics ready with Crossbred IWB holster. $700 May trade on revolvers 357 magnum or bigger. No Taurus please.
-
Newer PX4 model G-SD in 9mm. Has an extended mag release, a "heavy" barrel (essentially their .40 barrel but chambered in 9mm) and a Langdon-Inspired DA/SA trigger. G Model so decock only. Comes with 3 17-round magazines and one 20-round magazine. About 50 rounds through it. Asking $575. No really looking for trades. Only trade would be for a M9A1 in 9mm or Ruger Mark IV 22/45 Tactical
-
I’m looking for a complete rear sight for a Smith and Wesson N Frame with a square front (old model). I’m looking to bring my Model 29 back to original and pull the scope, so if anyone has a rear sight for one let me know what you’re looking to get out of it.
-
Selling this unfired PSA (Palmetto State Armory) 16 in barrel AR-15. Multi-cal (5.56 or .223). Carry handle is mil-spec PSA. It mounts to the rail and can be removed to install a different optic. Furniture color is FDE (flat dark earth). $560 FIRM. Not interested in any trades. Local pick up in Clarksville only. No shipping. Buyer must be at least 18 years of age with valid Tennessee or military ID. Buyer must sign a Bill of Sale. If the listing is still active, the rifle is still available. Manufacturer's description: Upper 16" Barrel Length 5.56 NATO Chamber 1 in 7" twist 4150V Chrome Moly Steel Barrel, Nitride Carbine-length Gas System M16 Full Auto Bolt Carrier C158 MPI/HPT Bolt Charging Handle FEATURES Barrel: 4150V Chrom Moly steel. Chambered in 5.56 NATO, with a 1/7 twist, M4 barrel extension, and a carbine-length gas system. This M4 profile barrel is finished off with a standard handguard in Flat Dark Earth, F-Marked gas sight base, and A2 flash hider. Upper: Forged 7075-T6 A3 AR upper is machined to MIL-SPECS and hard coat anodized. These uppers are made for us right here in the USA by a mil-spec manufacturer. Bolt: Full-auto profile bolt carrier group. Milspec Carpenter No. 158® steel bolt, Shot Peened, High pressure tested, Mag particle inspected, Gas Key Hardened to USGI Specifications, Fastened with Grade 8 screws, and Staked Per Mil-Spec. 8620 steel M-16 profile carrier is chrome lined and phosphate coated. Lower: Manufacturer: Palmetto State Armory Product Line: PA-15 Platform: AR-15 Includes: Stealth Lower Furniture: Classic Finish: Flat Dark Earth FEATURES Machined from Aluminum Forgings 7075-T6 Hardcoat Anodizing: MIL-A-8625F, Type III, Class 2 Milspec diameter Receiver Extension M4 Stock, FDE Staked M4 Lock Nut Standard Carbine Buffer Un-notched Hammer compatible with 9mm use
-
for-sale Targa 25 automatic model GT 27 B Loudon
Sleep profit posted a topic in Firearms Classifieds
-
STOP IT!!! The word you're looking for is 'Sale' An item you want to sell, is 'For Sale' Do better.
-
Up for sale is a bushnell AR/22 rimfire scope 2-7x MOA. Great condition mounted once on a 10/22 for a short period then sat in its box. Includes box, papers, and bikini scope caps. Asking for $100 cash. Located in Chattanooga.
-
Kalashnikov KS-12T. Comes with the original box and everything that came in it. 10 rounds through it. 750 OBO.
-
S&W 15-3 .38 special and S&W 19-5 .357 mag. Each have 4 inch barrels. Each is $900 or $1700 for both.
-
Hello! I’m looking to sell my Remington 7600 30-06. It was manufactured in 2007. I just don’t hunt anymore and have no further use for it. This is cross posted. My asking price is $1000 or best offer, cash only. Open to trades, might consider a Glock plus cash. I am located in Cleveland, TN. I can meet you in Cleveland, Athens, Lenoir City, Oak Ridge, Knoxville, or Chattanooga.
-
A new in box Vortex Defender CCW 3 MOA dot. Took it out of the box and powered it on to verify it worked and put it back. All accessories from Vortex included. I can meet in West Knoxville/Lenoir City. $185
-
(4) 21 round Magpul Glock 9mm magazines, new and (2) 17 round Magpul Glock 9mm magazines, like new. Little use if any. $55 for all six magazines. Firm, no trades.
-
Let me know if you got some to sell
-
Looking for a Glock 43X in like new condition around Knoxville. Thanks
-
For sale -- S&W Model 41 .22 semiautomatic, excellent condition. This gun is a pre-1969 model (serial no. 77xxx) with cocking indicator and two factory magazines. Comes with original box. All yours for $1100, if you're a TN resident legally able to purchase handguns. I'm in Chattanooga but will travel a little bit for a deal. Not really looking for trades right now except that I do need a 2" Model 12 or 2" Model 15. Thanks for looking, Whisper
-
Anybody happen to have this historic almost extinct round? I bought a tri-barrel with 16 gauges over a single rifle and that's the caliber. Would rather not buy an entire box as I will probably never shoot through all of it, but im open.