larry1096

Yep. Also helps those of us with short fingers! Larry

And that's part of my issue with Sig, to be honest-there's no such thing as a 'pre-recall' or 'post-recall' P320, because Sig NEVER did a recall. They did a 'voluntary upgrade', which means any used Sig you encounter could potentially not be updated, and therefore not drop-safe. As far as 'my Sig has 5,000 rounds and has been fine', folks are missing the laws of really big numbers here. Sig has sold, by their own account, about three and a half MILLION P320's of all configurations. During that production run, parts suppliers have changed, machine processes have changed, QC inspectors have changed. If this is some stack-up of error or tolerance stacking issue, the iterations that would need to be tested are potentially in the thousands. If only one run of sears were out of spec, and were caught by all but one QC inspector, there could still be thousands of guns in the wild with an unsafe condition. And I'll admit; ever since Sig told me I'd pay shipping both ways for a disconnector that crumbled in under 500 rounds on my $1,200 Nightmare Carry, I have some serious doubts about their commitment to quality. Combine that with the machining on the inside of that pistol, and I genuinely wonder what they would actually let out the door with their logo on it. Larry

I don't understand what the 'warning shot' was for? The guy was booking it out of there already. And shooting a fleeing person? Unless there's some really unusual details we're missing (like, "I'm heading over to your kid's house to kill him" or a kidnapped kid in the trunk) that's just crazy. Larry

Assuming 'wage92' is Wager Machining, that optic cut will be better than OEM. Fantastic work. Larry

Sewing them by hand, about 1 1/2 hours or so to about 2 1/2 hours, depending on the complexity of the holster. Larry

Over the last few years I've gone from no handgun optics to having them on all my carry guns. The good news is you'll learn to pick up the dot just like you learned to pick up the sights. The bad news is that's through repetition. Presentation drills (you don't even need to dry-fire, just 'present, place dot on target, repeat') helps a lot. Ben Stoeger also has some good videos about this, where he breaks it down in great detail. For me, optics have been a game changer; my eyesight had degraded to where shooting at 25 yards (where I used to be able to shoot 1 1/2" groups on a good day) was just about impossible. With the dot, I can do a Dicken drill clean (10 for 10) with relative ease, and shoot one hole groups again with my target guns. It's worth the effort. Larry

These are the only photos that would make it under the forum's photo limits, hope it gives you an idea of what I'm talking about. Thanks, Larry

I've noticed that gun shows around here don't really have anyone doing handmade leather holsters; something I've been doing as a hobby for years. I'm not sure if there's even a market for that these days. I've only ever done it for myself and a couple friends. So my request is: If you came upon some of these on a table at a gun show, would you be interested? What do you think a reasonable price for something like this would be? Appreciate any input-trying to figure out if I should give this a shot, so the more info the better. Larry

Hope it's OK to post a link (I'm not affiliated with these folks, FYI): Midwest Gun Works This is where I got mine. Try to find some other stuff to round out your order to make the shipping tolerable, but the part is only like $6. Larry

A sight for the original Bodyguard fits perfectly. Be advised that getting the original out is REALLY tough-worst I've ever done. Larry

I was a bit disappointed in my BG 2.0 until I changed the rear sight and got it zeroed. Now it's my favorite mini-gun, beating out a CW380 (which, to be fair, is still smaller than the BG) and a Ruger LCP Max. And the Max, for the record, has an aftermarket trigger (and still beats the hell out of my finger with trigger slap) and has been back to Ruger for shooting 4" low at 21'. Larry

Got any photos? Might suggest some solutions. Larry

No, they'll take the assembled slide. They will remove the sights, and it's your choice if they put them back on (I think it's like $10?) or you can do it yourself. I should mention their turnaround (keep in mind, I live near Crossville, so it gave USPS a running start, so to speak) was under a week, door-to-door. Job was done cleanly and when I contacted them with a couple questions they were very helpful and nice. Adding a link, in case that helps (and no affiliation, just like their work): Wager Machine Works If you do end up needing a sight pusher for some reason, I have a few and would be glad to help you out if you can make it out my way. Larry

If you're going to mount an optic that incorporates a minimalist rear sight, having it at the rear of the slide might work. I had Wager Machining do a direct cut on my G48 (so I didn't have to mess with the MOS stuff) and it's great, though I left the rear sight behind the optic. $100 and shipping. I've got a P365 with a non-optic slide right now, and I'm debating the same thing, but aftermarket Sig slides are less common and more expensive than Glock slides, so I'll likely have Wager cut this one as well. Larry

The gun show in Knoxville today had either two or three 'knifemakers' selling similar knives as 'made in the USA custom' knives. One tip is each table had 2-300 hundred knives, something a single 'custom knifemaker' would take a LONG time making. Second tip was the pricing, which wouldn't have allowed for a $10/hour pay rate for a custom maker. Third tip was the identical knives on the different tables. To be fair, some looked really nice-but going into a transaction with an obvious lie makes it pretty hard to trust anything else you're told, whether about materials or construction. Larry

This one isn't the impressive one. The one they'll come out with 18 months from now, that is 1/5 the size and 1/2 the cost, will be the impressive one. There's an arc to electronics, and this is the very beginning to that arc. Larry

The Bugbite is awesome, especially for NPE's. It really does hide better than the best ankle holster. As for the draw, yeah it's pretty tricky. Not fast access by any means, but a damned sight faster than running back to your car for your gun. Larry

Follow-up; I decided to head out today only because the wife is working and I was bored. Long story short, you were both completely correct. I have no idea what the point is of people setting up a booth at a gun show and asking 20% more than what I'd pay at Rural King or Dunham's for a gun, or why they think I'll buy Amazon-level junk for more than I can get it from Amazon for. I did see one young guy walking around with a newly purchased AR asking vendors if they sold a 'top' for it; he apparently meant an optic or a light (he didn't know which), but knew he needed something 'on top of it' to complete the look he was after. Holy smokes.... Larry

Thinking about going to look around. Any opinions on whether it's worthwhile, or should I just plan on buying some beef jerky? Larry

I've got one, and like it a lot. I struggled with the super-wide rear sight, though; I was swimming in it. I figured out that the rear sight from the original BG would fit the dovetail, and would retain the backplate correctly. This has a 'normal' size rear notch, and I find it much easier to shoot. I'd note that, using an MGW professional sight pusher, it was *very* difficult to remove the original rear sight. Toughest I've ever done. Note that the sight is off-center to zero the gun; that's a pretty well-noted issue with this gun. Larry

If she wears tights, look at Lethal Leggings; my wife got a pair, and they're high quality and pretty sturdy. Actually keep a lightweight pistol up without any trouble, and makes it much easier to hide on a female body than any holster we've found. We bought ours from the owner who was set up at a gun show; she even let my wife take a pair to the restroom to try on, which was a great help in choosing the size. Larry

I've got a METE SFX that shoots light out. I also found the grip too large, however. Then I found a guy on REDDIT who makes custom backstraps in extra small sizes, and it solved the issue completely. I even got mine covered in carbide grit, so it's REALLY non-slip. If you go to the REDDIT Canik sub and search for 'backstraps' I'm sure you can find him. After the grip mod, here's 5 shots at 33'. Larry

One of the proposed causes of these 'non-commanded discharges' is incremental or vibrational effects on the sear; in other words, enough vibration or minor jarring could microscopically move the sear out of engagement (like a tiny little bit of a jar-fire) until cumulatively they leave the sear barely engaged. This doesn't explain why the FPS isn't catching these, but it's about the most logical explanation for what could be happening I have seen, and one I haven't seen tested. It would also make sense that this affects LEO's most, since their guns tend to lead a bit rougher life than civilian's guns, and critically, can go long periods without be fired or unloaded (i.e., resetting the sear engagement.) I've seen a SIG-produced manual that acknowledged the risks of vibration, but can't find it again. Larry