drdirtnap

These all look fantastic! I personally like this method rather than spending a ton of money on some "coating of the moment" enjoyed by some fan bois!

drdirtnap is an oxymoron. Doctors are suppose to do no harm, however I am a proponent of "Sometimes extreme violence is the answer!"

Would you be interested in shipping?

Get your replacement sight issue settled?

Not knowing much about Tennessee, I spent a couple of weeks in Memphis in the early 80s, so I know nothing essentially. I need some land, outside the city, and a nicer smaller house to live in. Throw me some ideas on what areas are best. Thank you!

I grew up in Wisconsin. I don't know how your humidity compares, but I remember it.

Cratex or rubber polishing bits. Get them on Amazon.

Tru oil or linseed oil

So, you have a dimple in the broken Allen wrench piece. Take a fine nail set, spring loaded center punch... Heck, even a finish nail and tap on it with a steel hammer hoping the vibration will unwedge the broken piece. Alternatively, use the dimple to drill through the Allen wrench piece. Use a small drill bit and go slow with little to moderate pressure. Let the drill bit do the work. Push to hard, and it'll snap adding to the bad situation. That set of Allen wrenches you purchased are soft... They shouldn't twist off like that. Then, use the next size larger bit until you can get a screw extractor to bite well. Use little to moderate pressure removing the piece. After the Allen wrench piece is removed, you may want to try tapping in the largest Torx bit you can to remove the set screw. Use a small amount of heat if no plastic is around. I couldn't tell what it is you are working on or the material surrounding it. Take your time. Don't get frustrated.

I totally agree!

If you are still looking, there are a few on one of my local forums for $550-700. I just sold a 1959 39a Mountie for $600.

In alliance with the OP, AR lowers with set screws opposed to roll pins... wonderful for those with sausage fingers!

Will you ship on my dime?

Surely, someone close to this guy can help him out. Super simple replacement!

Very cool!

Sounds very nice!

Thanks. I would have to be located out of a city... I dislike many people!

Without spending a fortune, check Amazon or eBay. There's a lot of big name knock-offs to be had.

That's wonderful news! Thank you;

I second True Gun Value. GunBroker has way inflated prices!

Kriss Sphinx SDP in 9mm. Beretta PX4 Storm FS in 40.

New to me also! Served warm? Cold?

Hello All. I'm a FNG here, possibly moving from AZ to your fine state I am curious about the hunting here. What big/small game is here? How does one aquire license/tags? Do you have a draw system like AZ? I have not done any research on the matter. I just learned I may be heading this way 30 min ago! Thanks for your time!

Hello All. I may be leaving AZ for your great state. I understand the 2A movement here is strong. Am I right? Thanks for having me!