peejman

So how does that matter? Neither does Megan.

I've done this many times and it works very well. The meat will be very moist and tender. Don't use a full beer, that's wasteful! The can need only be about 1/3 full. I've found the type of beer doesn't matter, the meat doesn't retain any sort of "beer" taste. I usually pour a little from a bottle into an empty coke or soup can. The chicken will usually sit upright on the can w/o the fancy holder doodad. Leave the skin on. You can pull the skin back a bit and add some dry seasoning of your choice. I then sit the chicken on an aluminum pan to keep the drippings from flaring on my cheap grill. I cook on low/med temp for 30-40 minutes, until the juices stick clear. Be careful when you remove the can after cooking. Obviously it'll be very hot and very slippery. You don't want to spill a bunch of 200 deg greasy beer in your kitchen. AMHIK. I also use beer in my smoker instead of water. Has the same effect on the meat and doesn't cook off nearly as fast.

+1 to ^. Plan to revise the contents frequently as you already know how fast needs change with little kids. Backpacks are great with little ones because it keeps your hands free.

Steaks get a heathy soaking in worcestershire prior to grilling. Usually a bit of the hot-and-spicy montreal steak when they're done. Burgers get worcestershire plus any number of other things... spicy mustard, chopped onion, various dry spices... just whatever suits me at that moment. Grilled pork chops also get worcestershire (notice a theme?) prior to grilling, then any one of a dozen different seasonings.... Slap 'Ya Momma, Old Bay, a few different dry rubs, or a few different BBQ sauces. btw... Chattanooga folks, if you see a white packet of Lucious "The King's" Dry BBQ rub in the grocery store, buy it. It's a tad salty, but very well flavored. I've only ever seen it in Chattanooga. Fish... depends on what kind. Catfish gets battered and pan fried and eaten with some home-made tartar sauce and Old Bay or Slap 'Ya Momma. Tilapia gets pan seared with similar treatment. Salmon, mahi, snapper, tuna, and other similar "heavier" fishes get coated with olive oil and some herbs and then grilled. If I've got a lot of that type of fish (and can prepare far enough ahead of time), I have an excellent vinegar and oil type marinade (and yes, it has worcestershire too) recipie that I use prior to grilling.

I think off-body carry is best when riding. The risk of more severe injury is too great IMO. I've used my Crossbreed and it was ok, but I usually use my tank bag (CBR).

I asked ADT what they did if they lost connection. Their answer was ...." umm... well... umm... nothing." My primary purpose for the system was for fire protection more than burglary anyway. Security systems only scare away amateurs, so just having the sign in the yard will handle that task.

How long will it take to save another $100? It might be worth the wait.

Find a range near you that rents handguns. Try out whatever they've got available. Spending a few $$ in rental fees on one afternoon is much easier than buying and selling 6 guns to find one you like. Some places even offer free rentals if you buy a gun.

I used to have an ADT system. After accidentally setting off the alarm myself a couple of times I learned that if I turned it off at the panel within 40 seconds, they do nothing. I also learned that I can do a lot of things in 40 seconds.... like run all the way around the house looking for an unlocked door. Not to mention that any burglar with half a brain knows that all they have to do is disconnect the phone line on the outside of the house to disable the system monitoring. Who's your compnay?

Up until now, I've carried my spare mag in my front pocket. Various threads on the topic made me think a bit about accessibility problems with that, so I started looking for some sort of belt mounted spare mag holder. I wanted something small, that doesn't look like a spare mag holder, and reasonably priced. I also wanted a small EDC flashlight. Here's what I found: I was in Home Depot buying new supply lines for a new kitchen sink/faucet. This, of course, necessitated my walked up and down every aisle. I found this neat little cell phone pouch with a single AAA flashlight for $6. And the flashlight even has a tailcap swtich like I wanted. So I bought it (black with brown trim, if you must know). When I got home I discovered that the flashlight is almost completely useless. My cell phone puts out more light than this thing, and it's an old flip phone. But the pouch itself works perfectly. It's got both a slip through belt loop and a clip. The clip is too small to properly engage a 1.5" belt, and I'd rather use the loop anyway, so I'm going to remove it. A week or so later, I had to stop at wal-mart on my way home from work to get some stuff for my sick 2 yr old. Again, of course, I had to walk over to the sporting goods section to check on the ammo supply. There was more ammo on the shelf than I've seen in years. But I didn't buy any. The next aisle over has flashlights and I found this one for $3. When I got home I discovered that while it's certainly not a $100 tactical flashlight, it's near perfect for my purposes. Notice I said "near perfect" and the light that came with the pouch was "almost" useless. The Rayovac light is a twist type, which I'm not fond of. Seems far too easy to accidentally come on and run the battery down. Since both of these were single AAA lights with o-ring sealed and threaded tailcaps, I had an idea. I took the tailcap off the crappy light and lo' and behold, it fit the Rayovac light and the switch works! After removing the key chain doodad, it fits in in the side pocket on the pouch as well. So now I have a spare mag pouch and small flashlight for about $10.

One of my great uncles (now deceased) was huge into model railroading. His layout (HO scale) took up the entire attic of his house... prolly 800 sqft or more. It had towns separated by mountains with tunnels, bridges, stores, restaurants... all kinds of stuff. He'd named all the stuff after all his neices and nephews. He corresponded with other model railroaders all around the world (pre-internet). They traded "passes" ... his was the Dixie Railway System. It was really cool to visit as a kid. When he passed, I got one small section of track and a short train to make a static display for my son (which I've yet to do ). A few others got some small pieces and the rest went to a museum.

The picture below makes me thing the barrel is a steel sleeve inside a cast (aluminum?) outer sheath. Squib load leaves a bullet in the barrel. The next round strikes it and bulges the inner sleeve which fractures the cast outer sheath. Looks like a very smart design to me, the inner sleeve contains the failure by deforming instead of just exploding. I'd bet the cast outer section has little, if any structural strength.

As stated, dogs on a leash in front county campgrounds only. No dogs in the back country. But that doesn't stop some people. I've seen plenty people hiking with dogs. You can take them hiking in the Cherokee and Pisgah Nat'l Forests and Joyce Kilmer.

Another +1 for Beltman. Not cheap, but worth it.

I have a PT145 and really like it. It's a tad thinner than the XDSC, but otherwise very similar size. I think the Kahr PM45 is about the smallest .45 you'll find. If you're willing to change to 9mm or .40S&W, there are smaller options. I'm not a very big person but find the really small subcompacts difficult to shoot.

Most home improvement stores will have various grades of scotchbrite. It's color coded with green being the most abrasive and blue being the least. Red and gray are in the middle (I think). You'll have a difficult time replicating the OE finish or machine marks on the slide. There will likely be an obvious polished spot. You may want to blast the slide with a very light media (walnut shells, plastic media, etc.) to restore the uniform finish.

There's a guy on here somewhere near Nashville that does excellent Duracoat work. Here -> http://www.tngunowners.com/forums/long-guns/37225-showing-off-few-projects.html

This is correct, do not use steel wool. Scotchbrite, emory cloth, crokus cloth, polishing compound, .... any of those will work.

The one out 11E toward Jonesborough. It had just opened when I moved.

Use only a very sharp drill bit or the punch shown above. A dull drill will grab it and tear the leather. edit... a shoe repair or alterations shop would have the proper tools and likely do it for a modest fee.

I wouldn't be surprised to see no ammo. Some have it, some don't. When I lived in the Tri-Cities, the "new" walmart in Johnson City didn't have rifles or ammo. On a more positive note, the walmart on 411 in Maryville had more ammo on the shelves last week than I've seen in ages. Still no .45 tho...

Congrats!

I think you can go to the local DMV and get a temporary tag. I'd guess most LEO's would be understanding if you get stopped driving w/o one and have all the sale paperwork. I wouldn't use a tag off another vehicle.

Another +1 for Bill's Outpost. I bought a recevier from an individual in CA via another forum and he handled the transfer. (Gunny's told me it was illegal ). Smooth transaction and while waiting on the TICA to come back, I noticed he's got excellent prices on handguns, Hornady Critical Defense .45 ammo, and he's got that XD .45 Compact I've been wanting for a while.

+1 to the above. Don't sell one unless you're having some major financial issues. You'll regret it. If you do sell, do it FTF and request the option to buy it back if the new owner decides to sell.